• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1868-1875
• /
• 2016

This paper presents the mega trends of technology and competitiveness analysis results based on patent analysis for establishing effective research and development (R&D) strategy on UAV (Unmanned Aerial Vehicle) in the aerial ICT industry. In order to analyze mega trends of UAV technologies, patent analysis is conducted focusing on published/registered patents of Korea, the U.S., Japan, and Europe. We divided the target technologies into 3 main category levels based on the converging technology of UAV and ICT. The 3,433 patents are collected. Patent indicators such as patent activity (PA), cites per patent (CPP), and major market expansion (MME) are extracted for grasping the technology competitiveness and Korea's competitiveness per sub category levels of UAV. We suggest the R&D strategy of each technology areas based on patent analysis results. We analyzed Korea's technology levels, advanced companies' R&D trends, and patent trends through patent information and expected that this paper would be utilized for establishment of R&D strategy of UAV in the future.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.1
• /
• pp.70-79
• /
• 2024

This paper describes the results of the development of the the unmanned aerial vehicle system integration laboratory(UAV SIL) for the integrated verification. This UAV SIL is designed to test the robustness of the UAV system including the operational logics and the flight control system behaviors under many abnormal and emergency conditions such as data-link losses, airborne subsystem failures, engine shut down conditions, and ground control station faults. This paper presents how to build the UAV SIL and how to verify the in-development UAV system through the UAV SIL.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.2
• /
• pp.114-120
• /
• 2008

In the vision-based recovery phase, a terminal guidance for the blended-wing UAV requires visual information of high accuracy. This paper presents the light source target design and detection algorithm for vision-based UAV recovery. We propose a recovery target design with red and green LEDs. This frame provides the relative position between the target and the UAV. The target detection algorithm includes HSV-based segmentation, morphology, and blob processing. These techniques are employed to give efficient detection results in day and night net recovery operations. The performance of the proposed target design and detection algorithm are evaluated through ground-based experiments.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.1
• /
• pp.51-59
• /
• 2024

Uumanned aerial vehicle(UAV) systems have been used in various fields including industry and military. According to increasing the number of UAVs, the attention on interoperable UAV systems is increasing. In this paper, we propose the practical design of datalink in interoperable UAV systems. For practical design, we firstly review the operational scenarios in the interoperable UAV system. We then propose the system model of the datalink in interoperable UAV system. Consequently, the technical components such as the design of the network, the link management, the support of the multicast transmission, the support for autonomous mission and flight safety, and the datalink security are derived and reviewed for the practical design.

• ETRI Journal
• /
• v.45 no.5
• /
• pp.874-886
• /
• 2023

A joint resource-optimization scheme is investigated for nonorthogonal multiple access (NOMA)-enhanced scalable video coding (SVC) multicast in unmanned aerial vehicle (UAV)-assisted radio-access networks (RANs). This scheme allows a ground base station and UAVs to simultaneously multicast successive video layers in SVC with successive interference cancellation in NOMA. A video quality-maximization problem is formulated as a mixed-integer nonlinear programming problem to determine the UAV deployment and association, RAN spectrum allocation for multicast groups, and UAV transmit power. The optimization problem is decoupled into the UAV deployment-association, spectrum-partition, and UAV transmit-power-control subproblems. A heuristic strategy is designed to determine the UAV deployment and association patterns. An upgraded knapsack algorithm is developed to solve spectrum partition, followed by fast UAV power fine-tuning to further boost the performance. The simulation results confirm that the proposed scheme improves the average peak signal-to-noise ratio, aggregate videoreception rate, and spectrum utilization over various baselines.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.535-544
• /
• 2017

In this paper, to overcome the limitation of information transmission and reception according to the RF system of UAV, it is necessary to check the position of many UAVs in flight on the basis of mobile communication and to make the LTE modem lightweight and low power And UAVs that are in operation are received and controlled. Through this study, we proposed a method to control real-time location tracking by connecting high-resolution images to the network anytime and anywhere. For this purpose, we propose the requirements and requirements of LTE modem using real-time high-speed data communication technology (3G, 4G LTE, Bluetooth) by presenting the communication module system of LTE-based UAV. N:N control system concept and implementation technology(Control system structure, control data flow chart, flight planning and transmission, real-time location tracking).

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.6
• /
• pp.573-581
• /
• 2018

The purpose of this study is to evaluate the fixed wing type domestic UAV for monitoring of algae bloom in aquatic environment. The UAV used in this study is operated automatically in-flight using an automatic navigation device, and flies along a path targeting preconfigured GPS coordinates of desired measurement sites input by a flight path controller. The sensors used in this study were Sequoia multi-spectral cameras. The photographed images were processed using orthomosaics, georeferenced digital surface models, and 3D mapping software such as Pix4D. In this study, NDVI(Normalized distribution vegetation index) was used for estimating the concentration of chlorophyll-a in river. Based on the NDVI analysis, the distribution areas of chlorophyll-a could be analyzed. The UAV image was compared with a airborne image at a similar time and place. UAV images were found to be effective for monitoring of chlorophyll-a in river.

• 한국전산유체공학회:학술대회논문집
• /
• 2002.10a
• /
• pp.8-16
• /
• 2002

Now, the era of information, the rapid acquisition of vast and various information acts as a key role. for the national competitiveness. The smart UAV is brought to the fore as a new future technology which will be able to satisfy the information needs in broad and stereoscopic manner. The smart UAV, with VTOL capability, higher performance, and reliability over the existing technology thresholds, will lead the aerospace technology in the future. In this paper, the technology concept of smart UAV, the necessity of development, and the trend of worldwide R&D are introduced and analyzed. In addition, for the Smart UAV Development Program which is launched by the 21c Frontier R&D program this year, the role and application area of the CFD will be discussed.

• Journal of the Korean Society of Systems Engineering
• /
• v.1 no.2
• /
• pp.49-55
• /
• 2005

The Smart UAV Program was motivated by a huge potential market, a various application and future core technologies. The Smart UAV system is defined as the advanced air vehicle with the smart technology such as collision awareness and avoidance, healthy monitering and self-recovering, intelligent active control. Due to the broad interest by government, industry and academia, Smart UAV development center and government steering committee were established. The organization of the Smart UAV program consists of domestic/international companies and academia. In this paper, the process and application of system engineering was introduced for Smart UAV development program.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.2
• /
• pp.301-307
• /
• 2018

Unmanned Aerial Vehicles (i.e., drone) are gaining a lot of interest from a wide range of application domains such as infrastructure monitoring and parcel delivery service. In those service scenarios, multiple UAVs are involved and should be reliably operated by so-called UAV management system. For that, we propose oneM2M standard based UAV management and control system which is specifically targeted at traffic management of low-altitude UAVs. In this paper, we include oneM2M platform architecture and its implementation for UAV management system in conjunction with UAV interworking procedure.