• Title/Summary/Keyword: UART

Search Result 111, Processing Time 0.04 seconds

An Implementation of ECC(Elliptic Curve Cryptographic)Processor with Bus-splitting method for Embedded SoC(System on a Chip) (임베디드 SoC를 위한 Bus-splitting 기법 적용 ECC 보안 프로세서의 구현)

  • Choi, Seon-Jun;Chang, Woo-Youg;Kim, Young-Chul
    • Proceedings of the IEEK Conference
    • /
    • 2005.11a
    • /
    • pp.651-654
    • /
    • 2005
  • In this paper, we designed ECC(Elliptic Curve Cryptographic) Processor with Bus-splitting mothod for embedded SoC. ECC SIP is designed by VHDL RTL modeling, and implemented reusably through the procedure of logic synthesis, simulation and FPGA verification. To communicate with ARM9 core and SIP, we designed SIP bus functional model according to AMBA AHB specification. The design of ECC Processor for platform-based SoC is implemented using the design kit which is composed of many devices such as ARM9 RISC core, memory, UART, interrupt controller, FPGA and so on. We performed software design on the ARM9 core for SIP and peripherals control, memory address mapping and so on.

  • PDF

The Implementation of Continuous Digit Recognition Using DSP (DSP를 이용한 연속숫자 음성 인식기 구현)

  • Lee Seong-Kwon;Lim Young-chun;Seo Jun-Bae;Jung Hyun-youl
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • autumn
    • /
    • pp.93-96
    • /
    • 2004
  • 본 논문은 TMS320C5501 16bit DSP를 적용한 실시간 화자독립 연속 숫자인식기의 구현에 관해 서술한다. 하드웨어 모듈의 구성은 TMS320C5501 300MHz DSP, 코덱으로는 TLV320AIC1103, SDRAM, 외부장치와의 인터페이스를 위한 HPI, Uart, MIC, SPK Out 단자로 구성되었다. 음성인식 알고리즘은 HM-Net 방식을 사용하였고 고정소수점 연산처리 방식으로 C를 이용한 최적화 작업을 수행하였으며 스트리밍 방식의 인식 방법으로 실시간 처리가 가능하도록 구현하였다. 숫자 인식에 사용한 모델은 41음소에 기반한 트라이폰을 학습하였으며, 특징 파라미터로는 LPCMEL 20차를 사용하였다. 임베디드 시스템의 실시간 음성인식 시스템 구성에 중점을 두었으며 PC상에서의 성능과 비교해 볼때 본 DSP 상에서 500단어, 50문장의 인식을 평균 1.5초 전후로 인식하도록 하였으며 간단한 연결 단어 인식을 수행하는데 무리 없음을 보여준다. 특별히 한국어 연속숫자 부분에 중점을 두었고, 본 연구에서 구현된 연속 음성인식 시스템에 사용된 숫자 인식에서 음절 바이폰 모델에 대하여 $92.92\%$의 인식율을 얻을 수 있었다.

  • PDF

Development of zigBee module based on Smart Energy profile for IHD (스마트 에너지 프로파일 기반의 댁내 전력정보표시장치용 지그비 통신 모듈 개발)

  • Lee, Jun-Hee;Kwon, Jun-Su;Cho, Eun-Jung;Mun, Byung-Ho
    • Proceedings of the KIEE Conference
    • /
    • 2011.07a
    • /
    • pp.2009-2010
    • /
    • 2011
  • AMI환경에서 댁내 전력정보표시장치가 코디네이터로서 지그비 네트워크를 운용할 수 있도록 모듈 형태의 지그비 모뎀을 개발함에 있어서, 스마트 에너지 프로파일 기반의 지그비 통신 어플리케이션 펌웨어와 무선으로 송수신한 정보를 IHD에 전달하기 위한 UART 프로토콜을 설계하였다. 실제 제주실증단지의 가옥에서 시험한 결과, 정상 동작하는 것을 확인할 수 있었다.

  • PDF

A Design and Implementation of AES Cryptography Processor using a Low Cost FPGA chip (저비용 FPGA를 이용한 AES 암호프로세서 설계 및 구현)

  • Ho, Jung-Il;Yi, Kang;Cho, Yun-Seok
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2004.04a
    • /
    • pp.934-936
    • /
    • 2004
  • 본 논문의 목적은 AES(Advanced Encryption Standard)로 선정된 Rijndael 암호 및 복호 알고리즘을 하드웨어로 설계하고 이를 저비용의 FPGA로 구현하는 것이다. 설계된 AES 암호프로세서는 20만 게이트 급 이하의 FPGA로 구현한다는 비용의 제약 조건 하에서 대용량의 데이터를 암호화, 복호화 하기에 적합한 성능을 가지도록 하였다. 또한 구현 단계에서는 설계한 AES 암호프로세서와 UART 모듈을 동일 FPGA상에서 통합하여 실용성 및 면적 효율성을 보였다. 구현된 Rijndael 암호 프로세서는 20만 게이트를 갖는 Xilinx사의 Spartan-II 계열의 XC2S200 칩 사용시 53%의 면적을 차지하였고, Static Timing Analyzer로 분석한 결과 최대 29.3MHz 클럭에서 동작할 수 있고 337Mbps의 최대 성능을 가진다. 구현된 회로는 실제 FPGA를 이용하여 검증을 수행하였다.

  • PDF

Design of POWER LED Digital Dimming Control System (파워 LED의 디지털 조도제어 시스템 설계)

  • Kim, Bae-Sung;Son, Young-Dae
    • Proceedings of the KIEE Conference
    • /
    • 2009.07a
    • /
    • pp.2269.1_2270.1
    • /
    • 2009
  • 본 논문에서는 원칩 마이크로컨트롤러와 ZigBee IC가 내장된 소형 모듈을 사용한 파워 LED의 디지털 조도제어 시스템의 설계 및 구현에 대해 중점적으로 기술한다. 파워 LED의 조광제어 및 특정 조도에서의 정전류 구동을 위해 전류피드백을 통한 디지털 PI 전류제어 및 PWM 구동방식을 행하였고, 시각적인 깜박거림 없는 충분한 주파수의 스위칭을 통해 부스트 컨버터를 연속도통모드로 동작시켰다. 2.4GHz의 주파수 대역을 이용하는 PAN (Personal Area Network) 형태의 ZigBee 무선모듈과 마이크로컨트롤러와의 UART 통신을 통해 조도제어를 위한 PWM 제어를 행하였다. 본 논문에서 제시한 파워 LED의 디지털 조도제어 시스템은 최근의 에너지 및 환경규제에 적합한 조명관련 응용분야에서 다양하게 적용될 것으로 판단된다.

  • PDF

Implementation of a No Pulse Competition CPS-SPWM Technique Based on the Concentrated Control for Cascaded Multilevel DSTATCOMs

  • Wang, Yue;Yang, Kun;Chen, Guozhu
    • Journal of Power Electronics
    • /
    • v.14 no.6
    • /
    • pp.1139-1146
    • /
    • 2014
  • Digital signal processor (DSP) and field programmable gate array (FPGA) based concentrated control systems are designed for implementing CPS-SPWM strategies. The self-defined universal asynchronous receiver/transmitter (UART) protocol is used for communication between a master controller and an individual module controller via high speed links. Aimed at undesired pulse competition, this paper analyzes its generation mechanism and presents a new method for eliminating competition pulses with no time delay. Finally, the proposed concentrated controller is applied to a 10kV/10MVar distribution static synchronous compensator (DSTATCOM) industrial prototype. Experimental results show the accuracy and reliability of the concentrated controller, and verify the superiority of the proposed elimination method for competition pulses.

A Study about Interface between Zigbee System and PLC Modem (Zigbee 시스템과 PLC 모뎀간의 인터페이스에 관한 연구)

  • Kim, Hyo-Suk;Cho, Sung-Kwan;Shon, Su-Goog;Lee, Jae-Jo;Oh, Hui-Myoung;Choi, Sung-Soo
    • Proceedings of the KIEE Conference
    • /
    • 2006.07d
    • /
    • pp.2128-2129
    • /
    • 2006
  • Zigbee Alliance에서 표준화 진행 중인 Zigbee Stack을 가진 Zigbee 시스템은 통신매체로 RF(Radio Frequency)를 사용한다. 본 논문에서는 RF를 사용하는 기존의 Zigbee 시스템이 신호감쇄 문제나 주파수 공유로 인한 간섭문제 등에 약한 점을 고려하여 유선통신 매체로서 Power Line을 사용하는 PLC 시스템과의 인터페이스를 제안한다. 제안된 시스템은 Zigbee 시스템과 PLC 시스템간에 UART 인터페이스를 가능하게 함으로써 Zigbee 네트워크의 한계를 극복할 수 있으며 Zigbee 시스템의 적용 범위 및 성능 향상을 기대할 수 있다.

  • PDF

Porting a Real-time Serial Communication Module for S3C2440A Processor with ${\mu}C/OS-II$ (${\mu}C/OS-II$ 기반의 S3C2440A 프로세서로의 실시간 시리얼 통신 모듈 포팅)

  • Park, Sung-Joo;Oh, Sam-Kweon
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2007.05a
    • /
    • pp.945-948
    • /
    • 2007
  • 시리얼 통신은 다양한 분야의 임베디드 시스템에서 사용되는 통신 시스템의 일종이다. ${\mu}C/OS-II$는 실시간 임베디드 시스템에 사용되는 실시간 운영체제이다. S3C2440A 는 이러한 임베디드 시스템에 사용되는 마이크로 프로세서로 칩에 집적 된 UART 를 통하여 시리얼 통신을 지원한다. 이 논문에서는 시리얼 통신 중 ${\mu}C/OS-II$ 기반의 실시간 시스템을 위한 시리얼 통신의 설계와 S3C2440A로의 포팅을 한다.

  • PDF

Remote Control System for Textile Machinery using High Speed Power Line Communication (고속 전력선 통신을 이용한 섬유기계 원격제어 시스템)

  • Cha, Joo-Heon;Jun, Sung
    • Journal of the Korean Society of Manufacturing Technology Engineers
    • /
    • v.20 no.1
    • /
    • pp.1-6
    • /
    • 2011
  • This paper describes the high speed PLC-based remote control system that can monitor and control textile machineries bi-directionally through Internet. There are many textile machineries without network functions in the factory. We apply the PLC technology in order to give a network function to them in which the existing electric power line is used with network communication lines without separate wiring constructions. In order to realize this system, we have implemented a protocol for network communication of system, high-speed PLC modules, and Ethernet-to-UART modules. Finally we confirmed the effectiveness of system by applying actual test environments.

Design and Implementation of a Bluetooth Baseband Module (블루투스 기저대역 모듈의 설계 및 구현)

  • 천익재;오종환;임지숙;김보관
    • Proceedings of the IEEK Conference
    • /
    • 2001.06a
    • /
    • pp.21-24
    • /
    • 2001
  • Bluetooth wireless technology is a publicly available specification proposed for Radio Frequency (RF) communication for short-range and point-to-multipoint voice and data transfer. It operates in the 2.4GHz ISM(Industrial, Scientific and Medical) band and offers the potential for low-cost, broadband wireless access for various mobile and portable devices at range of about 10 meters. In this paper, we describe the structure and the test results of the bluetooth baseband module we have developed. This module has a UART interface for HCI and a audio codec for voice. The interface between controller and this module supports common control interface. An FPGA implementation of this module is tested for file and bit-stream transfers between PCs.

  • PDF