• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.519-535
• /
• 1997

The responses of human pulp fibroblastic cells to Ga-As Semi-Conductor-Dens-Bio Laser (Frequency: 5 Hz~10,000 Hz Model: SD-101A RCA, U.SA)) were examined in vitro using pulp fibroblastic cells obtained from the pulp tissue of human tooth. The mitogenic effect of soft laser was assessed by measuring the MTT assay. The morphologic effect for soft laser showed under the scanning and transmission electron microscopy. The results as follows; 1. The mitogenic response of the soft laser was not observed until 4th time of radiation, while the mitogenic response at 4th time increased mitogenic effect by as much as 1.7 fold compared to the control value. 2. The mitogenic response of the soft laser on pulp fibroblast differ from the mitogenic response on other fibroblasts. 3. In scanning electron microscopic study, The microvilli of cell surface increased gradually with width and length after laser radiation, it demonstrate that development of microvilli have close connection with differentiation of cells. 4. Under the transmission electron microscope, The laser-treated cells maintained their elongated shape and a high degree of cellular polarization. The large cell body containing a well developed Golgi complex, a large number of profiles of rough endoplasmic reticulum, and great numbers of mitochondria. 5. The laser-treated cells maintained the long straight bundles of closely apposed microfilaments or individual filaments forming a cross-linked network. These findings suggest that the laser may have important roles in promotion of pulp healing and consequently may be useful for clinical application in pulp regenerative procedures.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.4
• /
• pp.60-68
• /
• 2012

This study describes an analytical and experimental investigation of the pedestrian steel-deck truss bridge in the City of Rochester, New York, U.S.A. This investigation was undertaken to provide assurance that this important bridge continues to be functional for this use. An ambient vibration experiment on full-scale structures is a way of assessing the reliability of the various assumptions employed in the mathematical models used in analysis. It is also the most reliable way of determining the structural parameters of major importance in structural dynamics, such as the mode shapes and the associated natural frequencies. Pedestrian-induced vibrations have been measured on the bridge to determine the displacement and the vertical and transverse dynamic characteristics of the steel deck truss. In the analytical modeling, three-dimensional finite element analysis was developed and validated against the ambient tests.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.6 no.1
• /
• pp.55-59
• /
• 1977

The consumption of sugar in our diet increased so great that much U. S. dollars are spended to import sugar source from foreign contries. To replace a part of it we adopted mother plant and seeds of the well-known Stevia (Stevia rebaudiana Bertoni M.) originated from south America, from the Agricultural Experimental Station of Hokkaido, Japan, in 1974. In order to determine the growth condition of Stevia in our climate and soil condition, the results of survey and determination were as follows: 1. Germination rate of Stevia was averaged 33.6% at 35 th day after seedling and the maximum germination period was between 5 and 20 days after seedling. 2. The seedling rate of Stevia was about 8%. 3. Establishment of roots of Stevia propagated by cutting method was above 90% but only S-1 strain showed lower rate., 75%. 4. S-2 strain showed the best growth rate that was about 160cm by plant height and it was decreased by the following order : S-4, S-3, S-1, S-6 and S-5 strains. 5. S-4 strain resulted in 45 branches that was the highest number among strains tested and S-2 strain was the next. 6. The content of sweetening compound of Stevia, stevioside, was 5.3% in S-1, S-2, S-5 and S-4 strains but S-3 and $S^*$-6 strains were relatively low content, 4.9%. From the above results we obtained Stevia could be propagated by cutting method and the growth conditions including plant height, number of branches and content of stevioside were relatively better in S-2 and S-4 strains that were differentiated by the shape of leaf.

• Korean Journal of Plant Taxonomy
• /
• v.37 no.3
• /
• pp.217-224
• /
• 2007

A new species of Corydalis sect. Corydalis (Fumariaceae), Corydalis cornupetala Y.H. Kim et J.H. Jeong is described from Gyeongsan-si, Gyeongsangbuk-do in Korea. This new species is distinguished from the other species of the sect. Corydalis by some flower characters such as, purplish white petal with two dark stripes and horn-shaped apex of outer petal. The linear leaflets of C. cornupetala are similar to the lineariloba type of C. remota Fisch. ex Max. or C. namdoensis B.U. Oh et J.G. Kim, but much longer and narrower. The linear or lanceolate bract of C. cornupetala is also distinctive from the elliptical shape of C. remota and C. namdoensis.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.5
• /
• pp.1193-1201
• /
• 2016

In epidemiology or etiology, we are often interested in identifying areas of elevated risk, so called, hot spot or cluster. Many existing clustering methods only tend to a result if there exists any clustering pattern in study area. Recently, however, lots of newly introduced clustering methods can identify the location, size, and shape of clusters and test if the clusters are statistically significant as well. In this paper, one of most commonly used clustering methods, scan statistic, and its implementation SaTScan software, which is freely available, will be introduced. To exemplify the usage of SaTScan software, we used cancer data from the SEER program of National Cancer Institute of U.S.A.We aimed to help researchers and practitioners, who are interested in spatial cluster detection, using female lung cancer mortality data of the SEER program.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.5
• /
• pp.80-93
• /
• 2000

This study measured the shearing resistance of the roots of the Pinus Koraiensis by the tensile strength gained through their individual tensile test for the Root Reinforcement Model. On the basis of the shearing resistance value calculated through such a process the factor of safety(Fs) was comparatively presented by using the simplified Janbu Method in PCSTABL5M, the slop-analyzing software which had been developed in Purdue University of the U.S.A according to the shape of a slope and the type of soil. The results to have measured a stress and the factor of safety(Fs) by experiment are as follows. 1) The mean root diameter of the Pinus Koraiensis used for this experiment was 2.483mm and the mean tensile stress was calculated as 422.846(kgf/$\textrm{cm}^2$). In the strain ratio of material and the elastic modulus was measured 7.8%, 9,291.92(kgf/$\textrm{cm}^2$). 2) The shearing strength including the resistance of soil and root is expressed as Rt=C+Cr+$\sigma$.tan . ΔCr(kg/$\textrm{cm}^2$) of the shearing resistance calculated by estimating the areal ratio of roots at 10 is 0.253(kgf/$\textrm{cm}^2$). 3) As the result of making an analysis of the natural slope stability by the soil parameter, the factor of safety(Fs) was calculated at 1.795 in CL, and the stability analysis of the root reinforcement slope, Fs was calculated at 1.952. However, since a precise analysis of the controlled factors of the slope analyses are demanded for more accurate dynamic analyses, the future demands a study on this.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.4
• /
• pp.531-540
• /
• 1994

Spline curve scheme is the most valuable tool for the CAD of industrial products. Hence, the development of a new, effective curve scheme can have immediate impact on the current design industries. This paper develops and implements a new methodology for the implementation of the visually continuous class of splines which can produce a more flexible and diverse curve shapes. This class of splines has advantaged over existing splines in that it can accommodate wider range of shapes while maintaining the interpolators property of the ordinary cardinal splines. Most importantly, we avoid using the previous method of implementing G$^1$ curves, where users must specify scalar values for the control of curve shapes. We derive and implement an easy-to -use transformation between the user-specified graphical tangent vectors and the actual parameters for the resulting curve. Since the resulting curve shape reflects original tangential direction faithfully, CAD users can simply represent approximate curve shapes with proper tangents. Consequently, a simple user interface device such as a mouse can effectively produce a various spline curves using the proposed spline tool.

• Korean journal of applied entomology
• /
• v.31 no.2
• /
• pp.170-173
• /
• 1992

Phytophagous insects of Monocotyledoneae were surveyed from May to October in 1991. Each p province was divided into 9 localities by $\boxplus$-shape for the collection. Seventeen weed species b belonging to 17 genera were collected, namely, 14 Graminales weed species of 14 genera, 1 s species of Farinales weed, and 1 species of Liliales weed. Phytophagous insects representing 5 orders, 13 families, 27 genera, and 36 species comprised the insect fauna on Monocotyledoneae w weeds. Five species were not identified out of 36 insect species. Grasshoppers, hemipteran, s scarab beetles, and leaf beetles were frequently collected. Lema concinnipennis was a potential biological agent on Commelina communis, and Oulema dilutipes was first collected from Setaria u viridis. Commelina communis in golf course was severely damaged by Adoretus tenuimacu/atus c chafer but this insect was also an important insect pest of turfgrass and trees.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.2
• /
• pp.55-66
• /
• 2018

South Korea aims to shift the 20 percent of electricity supplement from the fossil fuel including the nuclear to renewable energy systems by 2030. In order to realize this agenda in the buildings, the plus energy house is necessary to increase the renewable energy supplement beyond the zero energy house. This paper suggested KePSH (KIER Energy-Plus Solar House) and energy performance of house and renewable energy systems was investigated. The KePSH has the target of generating 40% surplus energy than the conventional house energy consumption. The plus energy house is the house that generates surplus energy from the renewable energy sources than that consumes. In order to minimize the cooling and heating load of the house, the shape design and passive parameters design were conducted. Based on the experimental data of the plug load in the typical house, the total energy consumption of the house was estimated. This paper also suggested renewable energy sources integrated HVAC system using air-source heat pump system. Two cases of renewable energy system integration methods were suggested, and energy performance of the cases was investigated using TRNSYS 17 program. The results showed that the BIPV (building integrated photovoltaic) system (i.e., CASE 1) and BIPV and BIST system (i.e., CASE 2) shows 42% and 29% of plus energy rate, respectivey. Also, CASE 1 can generate 59% more surplus energy compared with the CASE 2 under the same installation area.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.23 no.4
• /
• pp.25-34
• /
• 1986

A two-dimensional linear method has been developed for the motion and the second-order steady force arising from the hydrodynamic coupling between waves and currents in the presence of a body of arbitrary shape. Interaction between the incident wave and current in the absence of the body lies in the realm beyond our interest. A Fredholm integral equation of the second kind is employed in association with the Haskind's potential for a steadily moving source of pulsating strength located in or below the free surface. The numerical calculations at the preliminary stage showed a significant fluctuation of the hydrodynamic forces on the surface-piercing body. The problem is approximately solved by using the asymptotic Green function for $U^2{\rightarrow}0$. The original Green function, however, is applied for the fully submerged body. Numerical calculations are made for a submerged and for a half-immersed circular cylinder and extensively for the mid-ship section of a Lewis-form. Some of the results are compared with other analytical results without any available experimental data. The current has strong influence on roll motion near resonance. When the current opposes the waves, the roll response are generally negligible in the low frequency region. The current has strong influence on roll motion near resonance. When the current opposes the wave, the roll response decreases. When the current and wave come from the same direction, the roll response increases significantly, as the current speed increases. The mean drift forces and moment on the submerged body are more affected by current than those on the semi-immersed circular cylinder or on the ship-like section in the encounter frequency domain.