• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.8
• /
• pp.1214-1219
• /
• 2008

This study was conducted to evaluate the effect of supplementing tuna oil to diets of growing-finishing pigs (barrows and gilts) on backfat characteristics when slaughtered at different weights. Four hundred and eighty crossbred (Large White$\times$Landrace$\times$Duroc) pigs averaging 30 kg were allotted to 12 treatment combinations (40 pigs/treatment combination) in a completely randomized design with a $2{\times}2{\times}3$ factorial arrangement of treatments. The treatments were: dietary tuna oil supplementation (0 and 2%); sex (barrows and gilts); and slaughter weight (90, 100 and 110 kg). As pigs reached their slaughter weight, they were randomly selected (8 pigs/treatment combination; 96 pigs in total) and slaughtered. Backfat colour, hardness and fatty acid profile were assessed. There were significant (p<0.05) differences in colour (L* and a* values) among treatments. Backfat of the control group was harder than on the tuna oil (p<0.001) and that of barrows was harder than of gilts (p<0.05). In addition, the thiobarbituric acid reactive substances (TBARS) values of fat from the tuna oil group stored for 3 days were higher (p<0.001) than the control group. The TBARS values of gilts tended to be higher than those of barrows and increased with increasing slaughter weight in the tuna oil group. The cholesterol and triglyceride levels were not affected by diet and sex but the triglyceride level increased with increasing slaughter weight (p<0.01). The tuna oil group had higher polyunsaturated fatty acid (PUFA) content, ratio of PUFA: saturated fatty acid (SFA) and total n-3 fatty acids but lower monounsaturated fatty acids content and n-6:n-3 fatty acids than the control group (p<0.01). Gilts had higher PUFA and n-6 fatty acids in backfat than barrows (p<0.05). The backfat from both 90 and 100 kg slaughter-weight groups had a lower ratio of n6:n3 fatty acid than the 110 kg slaughter-weight group (p<0.05). However, this was more pronounced in the tuna oil group. The PUFA: SFA was also increased while the n-6:n-3 ratio tended to reach the recommended levels for healthy eating in human beings of <5. However, due to oxidative susceptibility, barrows should not be slaughtered at more than 100 kg for the meat to be acceptable to consumers.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.325-333
• /
• 2010

In this study, new moment-resisting precast concrete beam-column joint made up of hybrid steel concrete was developed and tested. This beam-column joint is proposed for use in moderate seismic regions. It has square hollow tubular section in concrete column and connecting plate in precast U-beam. The steel elements in column and beam members were connected using bolt. Furthermore, in order to prevent the premature failure of concrete in hybrid steel-concrete connection, ECC(engineered cementitious composite) was used. An experimental study was carried out investigating the joint behavior subjected to reversed cyclic loading and constant axial compressive load. Two precast beam-column joint specimens and monolithic reinforced concrete joint specimen were tested. The variables for interior joints were cast-in-situ concrete area and transverse reinforcement within the joint. Tests were carried out under displacement controlled reverse cyclic load with a constant axial load. Joint performance is evaluated on the basis of connection strength, stiffness, energy dissipation, and displacement capacity. The test results showed that significant differences in structural behavior between the two types of connection because of different bonding characteristics between steel and concrete; steel and ECC. The proposed joint detail can induce to move the plastic hinge out of the ECC and steel plate. And proposed precast connection showed better performance than the monolithic connection by providing sufficient moment-resisting behavior suitable for applications in moderate seismic regions.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.31-39
• /
• 2011

More than sixty percentage of highway in South Korea were constructed by concrete pavements and more than half of the concrete pavements were twenty years or older. Maintenance and rehabilitation of aged cement concrete pavements required early transportation opening due to difficulty of preparing bypass roads, given South Korea's transportation condition and so far, mostly asphalt concrete overlay has been used. However, asphalt concrete pavement maintenance and rehabilitation is costly because of early damage and at the same time, it causes inconvenience to the road users. Recently, as an effective method of rehabilitation for aged cement concrete pavement, bonded concrete overlay is being attempted. Therefore, utilizing various data on year-by-year basis is needed to rationally analyze of the damage on asphalt concrete overlay and bonded concrete overlay is necessary. However, in South Korea database of Serviceability damage on asphalt concrete overlay and bonded concrete overlay does not exist. In this research, performance is evaluated by the LTPP (Long Term Pavement Performance) Data of U.S.A, which accumulated various damage data of asphalt concrete overlay and bonded concrete overlay. However, the pattern distress of asphalt concrete overlay and bonded concrete overlay are different. Therefore, the pavement distress data of each section is collected into database and distress are calculated PCI(Pavement Condition Index) in order to compare life of asphalt concrete overlay and bonded concrete overlay.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.67-75
• /
• 1999

The use of composite restorative materials is established due to continuing improvements in the materials and restorative techniques. Composite resins are widely used for the restoration of cervical lesions because of esthetics, good physical properties and working time. There are several types of cavity design for class V composite resin filling, but inappropriate cavity form may affect bonding failure, microleakage and fracture during mastication. Cavity preparations for composite materials should be as conservative as possible. The extent of the preparation is usually determined by the size, shape, and location of the defect. The design of the cavity preparation to receive a composite restoration may vary depending on several factors. In this study, 5 types of class V cavity were prepared on each maxillary central incisor. The types are; 1) V-shape, 2) round(U) shape, 3) box form, 4) box form with incisal bevel and 5) box form with incisal bevel and grooves for axial line angles. After restoration, in order to observe the concentration of stress at bonding surfaces of teeth and restorations, developing a 2-dimensional finite element model of labiopalatal section in tooth, surrounding bone, periodontal ligament and gingiva, based on the measurements by Wheeler, loading force from direction of 45 degrees from lingual side near the incisal edge was applied. This study analysed Von Mises stress with SuperSap finite element analysis program(Algor Interactive System, Inc.). The results were as follows : 1. Stress concentration was prevalent at tooth-resin bonding surface of cervical side on each model. 2. In model 2 without line angle, stress was distributed evenly. 3. Preparing bevel eliminated stress concentration much or less at line angle. 4. Model with round-shape distributed stress concentration more evenly than box-type model with sharp line angle, therefore decreased possibility of fracture. 5. Adding grooves to line angles had no effect of decreasing stress concentration to the area.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.6
• /
• pp.1256-1266
• /
• 2004

2-Bromooctanoic acid (2-BrOA) is known to block the formation of polyhydroxyalkanoic acid (PHA) in Pseudomonasfluorescens BM07 without any influence on the cell growth when grown on fructose, but it inhibits the cell growth when grown on octanoate (OA) (Lee et al., Appl. Environ. Microbiol. 67: 4963- 4974, 2001). We investigated the role of 2-BrOA in the PHA synthesis of the bacterium grown with mixtures of fructose and fatty acids. OA, 11­phenoxyundecanoic acid (1 1-POU), and 5-phenylvaleric acid (5-PV) were selected as model substrates. When supplemented with 50 mM fructose, all these carboxylic acids suppressed the formation of PHA from fructose, however, the ~-oxidation coenzyme A monomers derived from the carboxylic acids were efficiently polymerized, but the conversion yield [(mol of carboxylate substrate converted into PHA)/(mol of carboxylate substrate in the feed)] was low (e.g., maximally $\~53\%$ for 5 mM 11-POU). Addition of 2-BrOA (up to 5 mM) to the mixed carbon sources raised the conversion yield sensitively and effectively only at low levels of the acid substrates (e.g., 2 mM 1 1-POU or 5 mM OA): For instance, $100\%$ of 2 mM ll-POU were converted into PHA in the presence of 5 mM 2-BrOA, whereas only $\~10\%$ of the 1 1-POU were converted in the absence of 2-BrOA. However, at highly saturated suppressing levels (e.g., 5 mM ll-POU), 2-BrOA inhibitor showed no significant additional effect on the conversion ($60- 70\%$ conversion irrespective of 2-BrOA level). The existence of competitive and compensative relationship between 2­BrOA and all the carboxylic acid substrates used may indicate 'Present address: Section on Brain Physiology and Metabolism, Bldg. 10, Rm. 6N202, National Institute on Agmg, National Institute of Health, Bethesda, MD 20892, U.S.A. that all the acid substrate-derived inhibiting species bind to the same site as the 2-BrOA inhibiting species does. We, therefore, suggest that 2-BrOA can be used for efficiently increasing the yield of conversion of expensive substituted fatty acids into PHA and then substituted 3-hydroxyacids by hydrolyzing it.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.65-78
• /
• 2007

The pollutants (Rn, CH, CO, HS, radioactive gas from radiolysis) were generated from the process of construction and operation of underground repository, and after disposal of low-intermediate radioactive waste inside there must be controlled by a ventilation system to distribute them in area where enough air is supported. Therefore, a suitable technical approach is needed especially at an underground repository that is equipped with many entry tunnels, storage tunnels, exhaust-blowing tunnels, and vertical shafts in complicated network form. For the technical approach of such a ventilation system, WIPP (Waste Isolation Pilot Plant) in U. S and SFR (Slutforvar for Reaktorafall) low-intermediate radioactive waste repository in Sweden were selected as the models, for calculating the required air quantity, organizing a ventilation network considering cross section, length, surface roughness of the air passage, and describing a calculation of resistance of each circuit. Based on these procedures, a best suited ventilation system was completed with designing proper capacity of fans and operating plan of vertical shafts. As a result of comparing the two repositories based on the geometry dimensions and ventilation facility equipment operation, more parallel circuit as in WIPP, brought decrease in resistance for entire system leading to reduce of operating costs, and the larger cross-sectional area of the SFR, the greater the percentage of disposal capacity. Accordingly, the mixture of parallel circuit of WIPP repository for reducing resistance and SFR repository formation for enlargement of disposal capacity would be the most rational and efficient ventilation system.

• Journal of Labour Economics
• /
• v.29 no.3
• /
• pp.1-23
• /
• 2006

This study investigates the effects of inward foreign direct investment on local workers' wages by focusing on U.S. manufacturing industries for the period from 1987 to 1992. Contrary to public perception that foreign ownership is positively associated with higher wages, previous studies show mixed results. Since most of the previous studies used industry or firm level average wages, they can not control for the impact of individual characteristics on wages. I use two different approaches to control individual characteristics and to implement estimation in this study: (1) One-step estimation with industry-state level of inward foreign direct investments by using individual level data, and (2) Two-step industry characteristic regression approach. The higher presence of foreign firms is associated with higher local wages after workers' observable characteristics are controlled for in the first approach. This effect, however, disappears once workers' industry affiliations and regions are controlled for in cross-section analysis. In a panel data analysis, I did not find any statistically significant positive association between inward FDI activities and industry wage premiums within industry. Further, inward FDI activities appeared to be negatively associated with worker's industry wage premium for workers with more than high school education.

• Journal of The Korean Astronomical Society
• /
• v.49 no.1
• /
• pp.25-35
• /
• 2016

Multiple color selection techniques are successful in identifying quasars from wide-field broadband imaging survey data. Among the quasars that have been discovered so far, however, there is a redshift gap at 5 ≲ z ≲ 5.7 due to the limitations of filter sets in previous studies. In this work, we present a new selection technique of high redshift quasars using a sequence of medium-band filters: nine filters with central wavelengths from 625 to 1025 nm and bandwidths of 50 nm. Photometry with these medium-bands traces the spectral energy distribution (SED) of a source, similar to spectroscopy with resolution R ~ 15. By conducting medium-band observations of high redshift quasars at 4.7 ≤ z ≤ 6.0 and brown dwarfs (the main contaminants in high redshift quasar selection) using the SED camera for QUasars in EArly uNiverse (SQUEAN) on the 2.1-m telescope at the McDonald Observatory, we show that these medium-band filters are superior to multi-color broad-band color section in separating high redshift quasars from brown dwarfs. In addition, we show that redshifts of high redshift quasars can be determined to an accuracy of Δz/(1 + z) = 0.002 - 0.026. The selection technique can be extended to z ~ 7, suggesting that the medium-band observation can be powerful in identifying quasars even at the re-ionization epoch.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3A
• /
• pp.207-214
• /
• 2011

Ultra High Performance Concrete (UHPC), which is characterized by its high strength and advanced ductile behavior that is much superior to those of convention concrete, is a useful material to make thinner and longer bridges. The precast segmental construction method utilizing UHPC has been mainly studied because cast-in-place UHPC is very difficult and complicate to be achieved. As a part of those research, the structural performance evaluation of different types of joint connection method for hybrid cable-stayed bridge utilizing UHPC by using nonlinear analyses is performed in this study. The bond stress at joint is obtained by section force analyses for a 600 m cable-stayed bridge deck, and compared with the required bond stress at joint. Analysis results show that the U Type connection and straight type connection resist the highest ultimate load and bond strength, respectively. In addition, all considered joint connection systems satisfy the bond performances at joint required in the final stage of cable-stayed bridge utilizing UHPC.

• Journal of Ginseng Research
• /
• v.32 no.4
• /
• pp.332-336
• /
• 2008

Red ginseng is classified according to outer form and the quality of internal tissue, and red ginseng below third grade can't be sold. Also there are many differences in price according to grade. So if inferior Red ginseng is sold, economic loss and claim take place. This research is done conducted to investigate the possibility of the non-destruction internal tissue investigation of red ginseng. It is observed and compared that MR image after getting MR image agrees with real cutting side in 10-13% water content of red ginseng. The MR image can be obtained to see the internal section of red ginseng with equal condition of time, temperature and slice thickness in spin echo pulse sequence. The MR signal of red ginseng is very weak, because it contains low water density. So it takes about 30 minutes with the measurement of single point image (SPI). But the suitable time to distinguish internal tissues is about 9 seconds in TE (Echo Time) 2.23 ms, TR (Repetition Time) 150ms. The image to discriminate internal tissues in 9 seconds can be obtained when slice thickness is 10 mm with changes of 3, 5, 10 mm. The image obtained after 30 minutes' boiling of 55 degrees has clearer image than that of normal temperature. It is thought that MR signal is stronger through active motion of water particles as temperature increases. With this method MR image of red ginseng can be obtained and characteristics of internal tissues can be observed in such a short time.