• 제목/요약/키워드: U-factor

검색결과 1,478건 처리시간 0.025초

U57 풍력발전기 전력품질 실증연구 (Study of Power Quality Measurement U57 Windturbine)

  • 이병철;박희철;황진수;류지윤
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2008년도 추계학술대회 논문집
    • /
    • pp.310-314
    • /
    • 2008
  • The exploitation of the wind energy resource is a rapidly growing area world-wide. The number of installed units is continuously increasing, and it is important to respect and to deal with the impact of wind turbine. This paper addresses the power quality characteristics of U57 Wind Turbine. 750kW gearless type wind turbine for low wind speed, named U57, is developed by UNISON. The power quality measurement system consists of measuring WTG output current, line-to line voltage and wind speed signal. With using measured data, power quality measurement is evaluated about maximum power, reactive power, voltage fluctuation, harmonics according to IEC 61400-21.

  • PDF

′U자형 골′ 곡두사면의 토양수분 분포와 유출특성 (Runoff Characteristics and Soil Moisture Distribution of ′U-shaped Goll′ Valley Head Slope)

  • 박종관;양해근
    • 대한지리학회지
    • /
    • 제39권1호
    • /
    • pp.45-55
    • /
    • 2004
  • 본 논문은 물순환 기구와 지형 발달에 대한 상호작용을 정량적으로 평가하기 위한 일환으로 조사한 내용 중 'U자형 골' 곡두사면의 강우-유출특성과 수분분포 그리고 지중수이동에 관하여 기술하였다. 그 내용은 다음과 같이 요약할 수 있다. 'U자형 골' 전면에 나타난 fissure와 파이프 입구는 직접유출 성분을 토양 파이프 혹은 토양층에 많은 수량을 유입시킴으로서 토양층의 침식을 가속화시켜 토양 파이프의 확대와 발달에 기여할 것으로 간주된다. 그리고 토양에 침투한 대부분의 강우가 파이프류로 유출되고, 나머지 일부가 지하수에 공급됨으로서 강우강도가 작은 강우 이벤트에도 선행강우의 효과에 의해서 지하수위와 파이프류가 민감하게 반응한 것으로 판단된다. 따라서 토양 파이프는 'U자형 골' 곡두사면의 물질수지를 좌우하는 중요한 요인이라 할 수 있다. 그리고 지중수의 비유속은 곡두사면 하단부보다 상단부에서 큰 변화를 나타내고. 강수량에 따라 곡두사면 상단부에 상대적으로 큰 비유속이 부가됨에 따라 'U자형 골' 곡두사면이 상부로 후퇴하는 조건을 제공한다고 생각할 수 있다.

u-Bike 서비스의 개념 및 적용 우선순위 연구 (Conceptualization of u-Bike Services and its Priorities)

  • 이재영;임윤택;이상호
    • 대한교통학회지
    • /
    • 제28권3호
    • /
    • pp.7-17
    • /
    • 2010
  • 그 동안 친환경 교통수단인 자전거의 수단분담율을 향상시키고자 하는 노력이 있었으나 다른 수단들과의 경쟁력 약화로 인하여 그 효과가 부진한 측면이 있었다. 따라서, 발달된 정보통신기술(ICTs)과 자전거를 결합하여 친환경적이면서 편리함을 동시에 갖춘 새로운 개념의 서비스를 정립함으로써 여러 가지 불편과 위험 요인을 극복할 필요가 있다. 본 연구는 환경과 ICTs가 결합된 소위 u-City에서 제공되는 서비스의 일환으로서의 u-Bike 서비스의 개념을 정립하고 이들의 적용 우선순위를 평가 및 도출하는데 목적이 있다. 본 연구에서는 u-Bike 서비스를 12개로 설정하고 이를 개념화하였으며, 계층분석기법(AHP) 등을 활용하여 서비스개발 및 적용의 우선순위를 평가하였다. 그 결과, 자전거와 대중교통연계 서비스(bike and ride service)가 최우선적으로 적용 가능한 서비스로 나타났으며, 다음으로 방치 및 도난예방서비스, 공공자전거시스템, 주차관리서비스, 그리고 자전거등록관리서비스의 순으로 적용 우선순위가 높은 것으로 나타났다.

U-채널 세그멘탈 콘크리트 교량의 차량충돌에 대한 안전성 분석 (A Stability Analysis for Vehicle Impact in U-Channel Segmental Concrete Bridges)

  • 최동호;나호성
    • 한국방재학회 논문집
    • /
    • 제10권6호
    • /
    • pp.17-25
    • /
    • 2010
  • 본 연구는 U-채널 세그멘탈 콘크리트 교량의 차량 충돌 안전성에 대한 연구를 수행하였다. U-채널 세그멘탈 콘크리트 교량은 추가 고정하중을 감소시키고, 측보가 방호벽 역할을 동시에 수행하는 교량이라는 장점을 가지고 있다. 그러나 측보의 파괴는 전체 교량의 붕괴로 이어질 수 있는 위험 요소를 가지고 있다. 따라서, U-채널 세그멘탈 콘크리트 교량 측보의 차량 충돌에 따른 거동분석 및 특성파악이 필요하다고 판단된다. 본 논문에서는 AASHTO LRFD 설계기준 (2007)의 정적 및 동적 차량 충돌해석 기준을 적용하여 U-채널 세그멘탈 콘크리트 교량의 충돌해석을 수행하였다. 정적차량충돌해석의 경우에는 AASHTO LRFD 설계기준 (2007)에서 제시하고 있는 등가정적하중 재하하여 해석을 수행하고, 동적차량충돌의 경우에는 AASHTO LRFD 설계기준 (2007)의 방호벽 충돌실험기준에 근거한 실제 차량을 모델링하여 충돌해석을 통한 안전성 검토를 수행하였다. 검토결과, AASHTO LRFD 설계기준 (2007)을 만족하는 정적 및 동적 충돌하중에 대해 U-채널 교량시스템은 안전성을 확보하고 있는 것으로 판단된다.

Al 2024-T3재의 Crack Opening Point의 평가에 관한 연구 (A Study on Evaluation of Crack Opening Point in Al 2024-T3 Material)

  • 최병기;장경천
    • 한국안전학회지
    • /
    • 제19권2호
    • /
    • pp.16-20
    • /
    • 2004
  • This paper aims to analyze fatigue fracture mechnisms with high strength aluminum alloys, which are widely used in vehicles or airplanes to prevent accidents. Usefulness of the crack opening point was proposed by using an effective stress intensity facor when evaluating the fatigue crack propagaion rate. Therefore an exact crack opening ratio can be measured for a more exact fatigue crack propagation rate. It is found that the fatigue crack propagation rate was valid within the range of experimentation as an effective stress intensity factor. Summarizing the results are as follows in this paper ; (1) It is found that the value of the crack opening ratio is constant at the rear of the specimen, U'=0.25 at the crack mouth and U'=0.45 at the crack tip, respectively regardless of the stress ratio. (2) The crack opening ratio is different according to measurement locations. The crack opening ratio value was measured at the crack mouth by a clip gage or measured behind the specimen by a strain gage. It is found that the crack opening ratio value is more accurate that any other measuring test for evaluating the crack propagation ratio test by effective stress intensity factor.

생쥐 2-세포기 배아에서 성숙유도물질의 기능적 역할 (The Functional Role of Maturation Promoting Factor in the Two-cell Embryos)

  • 강해묵;이대기
    • 한국동물학회지
    • /
    • 제36권2호
    • /
    • pp.277-284
    • /
    • 1993
  • A possible involvement of maturation promoting factor (nfPF) in the two-cell block phenomenon was studied by fusion experiments. Germinal vesicle (GlF) ooeyte was fused with a blastomore from late or blocked 2-cell mouse embryos. and germinal vesicle breakdoum (GVBD) of fused GV oocvtes in the presence of dbcAMP (100$\mu$g/ml) was scored as an index of MPF aniviD. GnD was induced approximately 30% by fusion of a blastomere derived from late 2-cell embryos, but not from blocked 2-cell embryos. The rate of GVBD was changed when GV oocyte was fused with a blastomere from late 2-cell embryos which were treated with u-amanitin, puromvcin or colcemid before and after hsion: Treatment of late 2-cell embryos with puromycin (50 Is/mll but not with u-amanitin (100 Is/ml) clearly inhibited GVBD, indicating that do novo protein synthesis maw be required for the appearance of MPF activity in late 2-cell embryos. Treatment of late 2-cell embryos w기h colcemid (0.1 Is/mll doubled GVBD, presumably due to the maintenance of metaphase or mitotic phase. SDS-PAGE and twoiimensional electrophoresis revealed that there was no difference in protein synthetic pattern in late and blocked 2-cell embryos, but three phosphoproteins with 27, 35 and 46 M)a, presumsblv M-phase components were phosphorylated in late 2-cell embryos but not in blocked 2-cell embryos. It seems then that MPF activity is closely related to phosphorylstion of M-phase components in late 2-cell embryos.

  • PDF

Dynamic Increase factor based on residual strength to assess progressive collapse

  • Mashhadi, Javad;Saffari, Hamed
    • Steel and Composite Structures
    • /
    • 제25권5호
    • /
    • pp.617-624
    • /
    • 2017
  • In this study, a new empirical method is presented to obtain Dynamic Increase Factor (DIF) in nonlinear static analysis of structures against sudden removal of a gravity load-bearing element. In this method, DIF is defined as a function of minimum ratio of difference between maximum moment capacity ($M_u$) and moment demand ($M_d$) to plastic moment capacity ($M_p$) under unamplified gravity loads of elements. This function determines the residual strength of a damaged building before amplified gravity loads. For each column removal location, a nonlinear dynamic analysis and a step-by-step nonlinear static analysis are carried out and the modified empirical DIF formulas are derived, which correspond to the ratio min $[(M_u-M_d)/M_p]$ of beams in the bays immediately adjacent to the removed column, and at all floors above it. Therefore, the new DIF can be used with nonlinear static analysis instead of nonlinear dynamic analysis to assess the progressive collapse potential of a moment frame structure. The proposed DIF formulas can estimate the real residual strength of a structure based on critical member.

단일 ㄱ형강의 블록전단 파단 및 전단지체 현상 -고력볼트 3개 또는 4개로 접합된 단일 ㄱ형강- (Block Shear Rupture and Shear Lag of Single angle in Tension Joint -Single angle with three or four bolt connection-)

  • 이향하;심현주;이은택
    • 한국강구조학회 논문집
    • /
    • 제16권5호통권72호
    • /
    • pp.565-574
    • /
    • 2004
  • 본 연구는 볼트개수 3개 또는 4개로 접합된 인장력을 받는 ㄱ형강의 블록전단 파단시, 전단지체 효과를 분석하여 AISC의 블록전단식과 순단면파단식을 비교 검토하였다. 볼트 3개 또는 4개로 접합된 실험체의 경우 순단면 파단과 같은 블록전단, 순단면 형태의 파단으로 파단되었다. 실험결과는 블록전단에 영향을 미치는 접합길이, 실험체의 두께, 감소계수 등을 변수로 분석하였다. 실험결과에 따라, 블록전단내력 산정시 Kulak의 제안한 감소계수 U를 계산해서 적용하는 것이 필요한 것으로 판단된다.

리트벨트 해석법을 이용한 $Y_1Ba_2Cu_3O_x$ 고온 초전도체의 구조분석 (The structure analysis of $Y_1Ba_2Cu_3O_x$ high Tc superconductor based on rietveld method)

  • 채기병;소대화
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제8권6호
    • /
    • pp.780-786
    • /
    • 1995
  • For the execution of RIETAN program adopting Rietveld Analysis Method, the sample superconductor is made according to the solid state synthesis method at 920.deg. C for 24hrs, and was examined for the optimization of parameters needed to analyze Rietveld method with the input of the measured pattern data after measuring the pattern resulted from the X-ray diffraction. It was proven that the lattice constant of the superconductor which was consisted of Pmmm orthorhombic crystal structure in the analyzed space group correspond to the presented theoretical lattice constant a=3.8887(8).angs., b=3.8238(4).angs., c=11.7079.angs.. Therefore, it was examined and confin-ned that the R factor, which was compensated after analyzing the structure of superconductor resulted from this experimented data with the computer simulation, was refined to $R_{wp}$=8.83[%], $R_{P}$=6.47[%], $R_{I}$=10.08[%], $R_{F}$=7.19[%], $R_{E}$=3.76[%]. On the basis of these experimental data, the significant parameter such as the scale factor(S) and the zero point shift(Z) and FWHM value(U,V,W) were optimized as follows; S=2.0827E-3, Z=0.2146, U=4.2761E-2, V=1.7983E-2, and W=2.6768E-2.2.2.2.2.2.

  • PDF