• Journal of Nutrition and Health
• /
• v.4 no.1
• /
• pp.29-40
• /
• 1971

For the measurement on the fat content if University Students, an intensive examination was conducted on a total of 3,030 students(male 2,577, female 453), from 16 to 25 years of age. The subjects were all students who had passed the written entrance examination for Seoul National University. Total Body Fat amount was measurement by skin-fold thickness with a skin-fold caliper(Manufactured by Cambridge Scientific Industrial Inc. U.S.A.) at four sites of the body, and it was calculated by Kim's and Lee's regression equation. As a result of this survey, the following conclusions were obtained; 1. Physical Measurements: i) The average of body height by anthropometric was male $167.95{\pm}4.85cm$ and female $156.03{\pm}4.56cm$. ii) The average body weight by anthropometric was male $56.42{\pm}5.65kg$ and female $51.29{\pm}5.34kg$. iii) The average of chest-girth by anthropometric was male $89.95{\pm}5.33cm$ and female $81.36{\pm}4.89cm$. iv) The average of sitting-height by anthropometric was male $91.23{\pm}4.98cm$ and female $86.18{\pm}4.15cm$. v) The average of arm circumference by anthropometric was male $23.76{\pm}2.17cm$ and female $22.39{\pm}1.79cm$. In all cases the male measurements were higher than the female. 2. The mean skin-fold thickness measured with a large skin-fold caliper was; At the sub-scapular: male $11.54{\pm}4.84mm$ and female $14.07{\pm}4.49mm$, Abdominal: male $10.36{\pm}7.09mm$ and female $14.95{\pm}5.47mm$, Lumbar; male $12.55{\pm}6.44mm$ and female $17.02{\pm}6.57mm$, Upper arm: male $6.28{\pm}3.71mm$ and female $11.62{\pm}3.99mm$, Total average: male $10.18{\pm}5.52mm$ and female $14.41{\pm}5.13mm$, in all cases the female measurements were higher than the male. 3. Data on body fat amounts according to body fat weight regression equation were: in male: Fat weight=10.56kg, Fat free weight=45.86kg, Fat weight/Total body mass(%)=18.71%, (Body fat amount %), Fat weight/Fat free weight(%)=23.02%, Fat free weight/Total body mass(%)=81.29%. in female: Fat weight=12.23kg, Fat free weight=39.06kg, Fat weight/Total body mass(%)=23.85%, Fat weight/Fat free weight(%)=31.31%, Fat free weight/Total body mass(%)=76.15%. The females value was higher than the males.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.1
• /
• pp.81-88
• /
• 2018

Objective : Spondylitis is often chemotherapy resistant and requires long-term treatment. Without adequate chemotherapy, the outcome can be fatal or result in severe neurologic damage. Therefore, differentiating the etiology of spondylitis is very important, particularly in spontaneous cases. As the prevalence of tuberculosis in Korea has decreased in recent years, updated clinical research about spondylitis is warranted. Methods : From April 2010 to March 2016, data from spondylitis patients were collected retrospectively. In total, 69 patients (51 with pyogenic spondylitis and 18 with tuberculous spondylitis) were included. Clinical data, laboratory findings including erythrocyte sedimentation rate (ESR) and C-reactive protein (CRP) level, measurements of Cobb angles at the initial and final follow-up, and radiologic features on magnetic resonance imaging (MRI) scans were evaluated. To test differences between the pyogenic and tuberculous groups, numerical data were compared using the student's t-test and Mann-Whitney U test, and categorical data were compared using the chi-square test and Fisher's exact test. Results : The patients' mean age was 60.0 years. Male sex was slightly predominant (56.5%). There was no difference in mean age and sex between the two groups. The pyogenic group had a relatively higher proportion of immunocompromised patients. The peak CRP value was higher in the pyogenic group than in the tuberculous group (14.08 mg/dL and 8.50 mg/dL, respectively, p=0.009), whereas the ESR was not significantly different between the groups (81.5 mm/h and 75.6 mm/h, respectively, p=0.442). Radiologically, the presence of disc space sparing and vertebral body collapse differed between the groups. In the tuberculous group, the disc was more commonly preserved on contrast-enhanced MRI (50% and 23.5%, respectively, p=0.044), and vertebral body collapse was more common (66.6% and 15.7%, respectively, p<0.001). The mean length of hospitalization was longer in the pyogenic group (56.5 days and 41.2 days, respectively, p=0.001). Four mortality cases were observed only in the pyogenic group. The most commonly isolated microorganism in the pyogenic group was Staphylococcus aureus(S. aureus) (methicillin susceptible S. aureus and methicillin resistant S. aureus [MRSA] in 8 and 4 cases, respectively). Conclusion : The clinical and radiological manifestations of spontaneous spondylitis differ based on the causative organism. Pyogenic spondylitis patients tend to have a higher CRP level and a more severe clinical course, whereas tuberculous spondylitis patients present with destruction of the vertebral body with disc sparing more frequently. The presence of MRSA is increasing in community-acquired spondylitis cases.

• International Journal of Highway Engineering
• /
• v.12 no.1
• /
• pp.79-86
• /
• 2010

Cold in-place recycling (CIR) using emulsified asphalt or foamed asphalt has become a more common practice in rehabilitating the existing asphalt pavement due to its cost effectiveness and the conservation of paving materials. As CIR continues to evolve, the engineered emulsified asphalt was developed to improve the field performances such as coating, raveling, retained stability value and curing time. The main objective of this research is to compare the laboratory responses of the engineered emulsified asphalt (CIR-EE) mixtures against the foamed asphalt (CIR-foam) mixtures using the reclaimed asphalt pavement (RAP)materials collected from the CIR project on U.S. 20 Highway in Iowa. Based on the visual observation of laboratory specimens, the engineered emulsified asphalt coated the RAP materials better than the foamed asphalt because the foamed asphalt is to create a mastic mixture structure rather than coating RAP materials. Given the same compaction effort, CIR-EE specimens exhibited lesser density than CIR-foam specimens. Both Marshall stability and indirect tensile strength of CIR-EE specimens were about same as those of CIR-foam specimens. However, Marshall stability and indirect tensile strength of the vacuum-saturated wet specimens of CIR-EE mixtures were higher than those of CIR-foam mixtures. After four hours of curing in the room temperature, the CIR-EE specimens showed less raveling than the CIR-foam specimens. On the basis of test results, it can be concluded that the CIR-EE mixtures is less susceptible to moisture and more raveling resistant than CIR-foam mixtures.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.109-115
• /
• 2011

This study was carried out to investigate the plant growth of various ferns affected by the shading and fertilizer application and to recommend the appropriate levels of light intensity. Evergreen ferns like Dryopteris nipponensis Koidz., Cyrtomium falcatum (L. f.) Presl, Onychium japonicum (Thunb.) Kunze and deciduous ferns like Athyrium niponicum (Mett.) Hence, Thelypteris decursive-pinnata Ching, Athyrium brevifrons Kodama ex Nakai were used in this experiment. Evergreen ferns showed the best growth in the shading level of 30~60%. The plant growth and ornamental value (leaf color) of these plants were improved according to the fertilizer application in appropriate shading levels. The survival rate remained constantly in all treatments. Deciduous ferns showed the best growth in different shading levels from 0 to 60%. Some treatments showed improved growth according to fertilizer application, whereas survival rate was in the other treatments. There were differences in plant growth of evergreen and deciduous ferns according to fertilizer application, and additional researches must be executed to explain these reponses.

• Journal of Korean Society of Transportation
• /
• v.29 no.6
• /
• pp.97-106
• /
• 2011

Mode choice model is an essential element for estimating- the demand of new means of transportation in the planning stage as well as in the establishment phase. In general, current demand analysis model developed for the mode choice analysis applies common parameters of utility function in each region which causes inaccuracy in forecasting mode choice behavior. Several critical problems from using common parameters are: a common parameter set can not reflect different distribution of coefficient for travel time and travel cost by different population. Consequently, the resulting model fails to accurately explain policy variables such as travel time and travel cost. In particular, the nonlinear logit model applied to aggregation data is vulnerable to the aggregation error. The purpose of this paper is to consider the regional characteristics by adopting the parameters fitted to each area, so as to reduce prediction errors and enhance accuracy of the resulting mode choice model. In order to estimate parameter of each area, this study used Household Travel Survey Data of Metropolitan Transportation Authority. For the verification of the model, the value of time by marginal rate of substitution is evaluated and statistical test for resulting coefficients is also carried out. In order to crosscheck the applicability and reliability of the model, changes in mode choice are analyzed when Seoul subway line 9 is newly opened and the results are compared with those from the existing model developed without considering the regional characteristics.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.5
• /
• pp.765-773
• /
• 1995

Effect of interfacial electrical conditions such as, the f potential of PET fiber and u-Fe203 particles, the stability parameter and potential energy of interaction on adhesion of a-Fe903 particles to PET fabric and their removal from the fabric, were investigated as functions of pH, electrolyte and ionic strength. The stability parameter, potential energy of interaction between a-Fe2O3 particles and PET fabric were calculated by using the heterocoagulation theory for a sphere-plate model The adhesion of a-Fe2O3 particles to PET fabric and their removal from PET fabric were carried out by using water bath shaker and Terg-O-Tometer under various solution conditions. The adhesion of a-Fe2O3 particles to the PET fabric and the removal of a-Fe2O3 particles from the PET fabric were biphasic and were maximum and minimum at pH 7~8, respectively. With high pH and polyanion electrolytes in solution, the adhesion of a-Fe2O3 particles to the PET fabric was low but effects of electrolytes on the removal of a-Fe2O3 particles from the PET fabric was small. The adhesion of a-Fe2O3 particles to the PET fabric and the removal of a-Fe2O3 Particles from the PET fabric were biphasic, and were lowest and highest at the ionic strength 1$\times$10-3, respectively. The adhesion of a-Fe2O3 particles to PET fabric was well related with the interfacial electrical conditions; it was negatively correlated with the f potentials of a-Fe2O3 Particles of its absolute value, the stability parameter and the maximum of total potential energy, while, the adhesion was not related with the t potentials of PET fiber itself. Therefore, the primary factor determining the adhesion of a-Fe203 particles to PET fabric may be the stability of dispersed particles caused by the electrical repulsion of particles. The removal of a-Fe203 particles from PET fabric was not related to such interfacial electrical conditions as the t potentials of PET fiber, the stability parameter and the maximum of total potential energy but removal was related to t potential of a-Fe203 particles.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.372-378
• /
• 2005

Calcium Carbonate Saturation Index (LI: Langelier Index), an indicator of $CaCO_3(s)$ saturation, indicates corrosiveness of drinking water and it has been used to monitor drinking water conditions in USA, E.U, and Japan. The objective of this research was to measure LI parameters including water temperature, pH, total alkalinity, calcium ion concentration, and electric conductivity, and to evaluate possibility of using LI in domestic system. Results showed that water temperature varied from 2.0 to $26^{\circ}C$ during 15 months, indicating an average annual temperature of $23.9^{\circ}C$. Total alkalinity was from 20 to 45 mg/L. The concentration difference between total alkalinity and $HCO_3{^-}$ value was hardly observed; the concentration of total alkalinity can be replaced by that of $HCO_3{^-}$. Tap water had a medium corrosiveness since LI values were from 2.0 to 0.5. To reduce the corrosiveness and to increase LI values of drinking water, the results of this study showed that chemicals such as $Ca(OH)_2$, $CaCO_3$, NaOH, or $NaHCO_3$ should be added to water treatment plants.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.482-488
• /
• 1997

Copper recovery from waste water of electronic industry has been conducted effectively in a fluidized bed reactor. Initial concentration of copper in the waste water, liquid flow rate in the reactor, reaction temperature and time and current density between the cathode and anode in the reactor have been selected as operating variables. The effects of operating variables on the recovery of copper have been studied. It has found that the copper resolved in the waste water can be recovered continuously by means of a fluidized bed reactor The recovery of copper decreased with an increase in the initial concentration of copper in the waste water, while it increased with increasing reaction time and current density, however, it exhibited its maximum value with the variations of liquid flow rate and reaction temperature. The optimum reaction condition to maintain the copper recovery around 85% is as follows ; $X_o=3wt%$, $U_L=0.5cm/s$, $T=25^{\circ}C$, $I=7A/dm^2$ and t=2hrs within this experimental condition.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.11
• /
• pp.1649-1656
• /
• 2015

Gene expression profiling has offered new insights into postmortem molecular changes associated with meat quality. To acquire reliable transcript quantification, high quality RNA is required. The objective of this study was to analyze integrity of RNA isolated from chicken skeletal muscle (pectoralis major) and its capability of serving as the template in quantitative real-time polymerase chain reaction (qPCR) as a function of postmortem intervals representing the end-points of evisceration, carcass chilling and aging stages in chicken abattoirs. Chicken breast muscle was dissected from the carcasses (n = 6) immediately after evisceration, and one-third of each sample was instantly snap-frozen and labeled as 20 min postmortem. The remaining muscle was stored on ice until the next rounds of sample collection (1.5 h and 6 h postmortem). The delayed postmortem duration did not significantly affect $A_{260}/A_{280}$ and $A_{260}/A_{230}$ ($p{\geq}0.05$), suggesting no altered purity of total RNA. Apart from a slight decrease in the 28s:18s ribosomal RNA ratio in 1.5 h samples (p<0.05), the value was not statistically different between 20 min and 6 h samples ($p{\geq}0.05$), indicating intact total RNA up to 6 h. Abundance of reference genes encoding beta-actin (ACTB), glyceraldehyde 3-phosphate dehydrogenase (GAPDH), hypoxanthine-guanine phosphoribosyltransferase (HPRT), peptidylprolylisomerase A (PPIA) and TATA box-binding protein (TBP) as well as meat-quality associated genes (insulin-like growth factor 1 (IGF1), pyruvate dehydrogenase kinase isozyme 4 (PDK4), and peroxisome proliferator-activated receptor delta (PPARD) were investigated using qPCR. Transcript abundances of ACTB, GAPDH, HPRT, and PPIA were significantly different among all postmortem time points (p<0.05). Transcript levels of PDK4 and PPARD were significantly reduced in the 6 h samples (p<0.05). The findings suggest an adverse effect of a prolonged postmortem duration on reliability of transcript quantification in chicken skeletal muscle. For the best RNA quality, chicken skeletal muscle should be immediately collected after evisceration or within 20 min postmortem, and rapidly preserved by deep freezing.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.1
• /
• pp.63-100
• /
• 2013

Research data means data in the form of facts, observations, images, computer program results, recordings, measurements or experiences on which an argument, theory, test or hypothesis, or another research output is based. Data may be numerical, descriptive, visual or tactile. Scientific research is changing because of the paradigm shift. It is all being affected by the data deluge, and a data-intensive science paradigm is emerging. Hence, paradigm shift in scientific research led to increase of value and importance of scientific data. Essential to the creative research and development for scientific data can be reused efficiently is the sharing and utilization of establishing management system. Establishing of management system for sharing and utilization of scientific data should be done at the national level, but compared with Europe, Australia, the United States, China, the management system of Korea doesn't have not linkage or efficiency or internal stability. Australia, the United States, China continues to expand a Mid- and Long-Term policy making, legislation, its investment in infrastructure, so as to promote the utilization of data, such as collection, management and maintenance of scientific data through the relevant agencies at the national level. This study consider legislation cases and management policies of the above countries to the end to that establish management system for the efficient and fair sharing and utilization of scientific data and the legal system, and that provide scientific data legislation and policies related to the future of our country.