• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.2
• /
• pp.255-260
• /
• 1994

Calving records of 107 heifers from two breed groups were used to identify the major factors contributing to calving difficulty (dystocia) and compare the influence of pelvic diameters, weight and height of heifers measured after breeding and before calving on dystocia. The horizontal and vertical pelvic diameters, hip height and weight of heifers were measured two months after breeding and again two months before calving. Snell transformed calving difficulty scores (0 = normal to 100 = surgical intervention) were used in analyzing the data by analysis of covariance. Body condition score of the heifer, sire birth weight of the calf, birth weight of the calf, and ratio of calf birth weight to pelvic area all had significant effects on dystocia. Calf birth weight, ratio of calf birth weight to pelvic area, and heifer's condition score were especially important. However, sex of calf did not have a significant influence on dystocia. Generally, the variables measured before calving accounted for a higher proportion of variation in dystocia than those measured after breeding. Thus, based on the relative importance of the major factors affecting dystocia, it is suggested that selection of bulls with low birth weight for breeding on normal size heifers with optimum body condition score, and well developed pelvic opening, would be effective in reducing the incidence and severity of dystocia in beef heifers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.2
• /
• pp.123-126
• /
• 1996

Sixteen Harnai males were used to evaluate the influence of varying levels of fourwing saltbush hay on feed and water intakes as well as the blood serum mineral status in a completely randomized design. The animals were grouped randomly into four, with four animals in each. The four groups were randomly allotted low, medium, high and very high levels of saltbush hay supplementation in addition to wheat straw. The animals were given fresh water at free of choice. Weekly body weight was recorded for each individual animal. Blood serum was collected for mineral contents. The experiment lasted for eight weeks. The inclusion of saltbush leaves in the diet showed a non-significant effect on the total dry matter intake. There has been a significant increase in the water intake when very high levels of saltbush were included in the ration. Lower levels showed no effect on the water intake. The animals maintained their body weight from week 1 to week 8. No treatment by weeks interactions on the potassium and sodium levels were detected. However higher levels of saltbush increased significantly the potassium and sodium contents in the serum. Calcium contents were significantly(p<0.01) lowered with the inclusion of saltbush leaves in the diet. Whereas Phosphorous contents showed an increasing(p<0.05) trend with the higher levels of saltbush. No clinical or sub-clinical toxicological symptoms were observed in the sheep with the higher mineral contents.

• Mycobiology
• /
• v.33 no.4
• /
• pp.206-209
• /
• 2005

Narceine methyl ester and narceine are potent alkaloids which were isolated from Corydalis longipes were found effective in vitro at very low concentration, i.e., $100{\sim}500\;ppm$ against spore germination of some test plant pathogenic fungi (Alternaria solani, A. tagetica, Cercospora abelmoschi, Curvularia maculans, Erysiphe cichoracearum, E. pisi, Fusarium udum, Helminthosporium oryzae, H. penniseti, Ustilago cynodontis). Among the test, phytopathogens the spores of F. udum, C. maculans and H. penniseti were highly sensitive at 200 ppm. However, spores of E. pisi, A. solani and A. tagetica were less sensitive at low concentration followed by other test fungi. Most of the fungi showed zero or nearly zero percent spore germination at 400 and 500 ppm.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.2
• /
• pp.182-189
• /
• 2012

In this paper, the input current and output voltage ripple of the soft switching interleaved boost converter was analyzed. Ripples of input current and output voltage with an interleaved method is analysed and as a result, the facts that it has lower ripple current than conventional interleaved method is verified. it means that a capacity of a main inductor can be reduced. Besides, a low capacitance of capacitor which means high lifetime and confidence can be used because of reducing ripples of output voltage. In order to verify the validity of the proposed converter used 10uF film capacitor, experiment was performed, and the efficiency of the proposed converter was measured with variable load and duty conditions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.7
• /
• pp.960-964
• /
• 2003

Effects of pH, sugars, organic acids, and metal ions on the stability of anthocyanin pigments extracted from mulberry (Morus alba L) fruit were studied. The pH had marked influences on the color of the anthocyanine pigment: i.e. the lower pH of the anthocyanin solution was, the more stable and intense of the pigment was. Among the sugars, sucrose was the most deleterious followed by fructose, glucose and maltose. Among the organic acids, maleic acid was found to be the most effective in stabilizing the pigment followed by acetic acid, citric acid and tartaric acid. Most metal ions except C $u^{+2}$ and F $e^{+3}$ were found to be effective in stabilizing the pigment.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.2
• /
• pp.286-290
• /
• 2006

A genomic library of Streptococcus vestibularis ATCC49124 was constructed in an E. coli plasmid vector, and the urease-positive transformants harboring the urease gene cluster were isolated on Christensen-urea agar plates. The minimal DNA region required for urease activity was located in a 5.6 kb DNA fragment, and a DNA sequence analysis revealed the presence of a partial ureI gene and seven complete open reading frames, corresponding to ureA, B, C, E, F, G, and D, respectively. The nucleotide sequence over the entire ure gene cluster and 3'-end flanking region of S. vestibularis was up to 95% identical to that of S. salivarius, another closely related oral bacterium, and S. thermophilus, isolated from dairy products. The predicted amino acid sequences for the structural peptides were 98-100% identical to the corresponding peptides in S. salivarius and S. thermophilus, respectively, whereas those for the accessory proteins were 96-100% identical. The recombinant E. coli strain containing the S. vestibularis ure gene cluster expressed a high level of the functional urease holoenzyme when grown in a medium supplemented with 1 mM nickel chloride. The enzyme was purified over 49-fold by using DEAE-Sepharose FF, Superdex HR 200, and Mono-Q HR 5/5 column chromatography. The specific activity of the purified enzyme was 2,019 U/mg, and the Michaelis constant ($K_{m}$) of the enzyme was estimated to be 1.4 mM urea. A Superose 6HR gel filtration chromatography study demonstrated that the native molecular weight was about 196 kDa.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.108-108
• /
• 2010

We have generated Ne-Xe plasma in dense plasma focus device with hypocycloidal pinch for extreme ultraviolet (EUV) lithography and investigated an electron temperature. We have applied an input voltage 4.5 kV to the capacitor bank of 1.53 uF and the diode chamber has been filled with Ne-Xe(30%) gas in accordance with pressure. If we assumed that the focused plasma regions satisfy the local thermodynamic equilibrium (LTE) conditions, the electron temperature of the hypocycloidal pinch plasma focus could be obtained by the optical emission spectroscopy (OES). The electron temperature has been measured by Boltzmann plot. The light intensity is proportion to the Bolzman factor. We have been measured the electron temperature by observation of relative Ne-Xe intensity. The EUV emission signal whose wavelength is about 6~16 nm has been detected by using a photo-detector (AXUV-100 Zr/C, IRD) and the line intensity has been detected by using a HR4000CG Composite-grating Spectrometer.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.54.2-54.2
• /
• 2011

야금학적 정련 공정 중 슬래그 처리, 일방향 응고, 플라즈마-전자기유도용해 공정을 적용한 태양전지용 실리콘 제조 기술에 관한 연구를 수행하였다. 원소재인 금속급 실리콘을 제조하기 위해원재료로 규석, 코크스(Cokes), 숯, 그리고 우드칩(Wood chip)을 사용하였으며, 150kW급 DC 아크로(Arc furnace)를 이용하여 순도 99.8% 금속급 실리콘을 제조하였다. 제조된 용융 상태의 금속급 실리콘은 슬래그와 반응시켜 불순물을 제거하였다. SiO2-CaO-CaF2 계의 슬래그를 이용하였으며, 금속급 실리콘과 슬래그의 질량비 및 반응 시간에 따른 실리콘 불순물 특성을 평가하였다. 이후 고액 계면이 제어 가능한 일방향 응고 장치를 이용하여 금속불순물을 제거하였다. 고액상태의 온도 조건 및 응고 시간에 따른 불순물 농도 변화를 평가하였으며, 순도 6N급의 실리콘을 제조하였다. 마지막 공정으로 스팀 플라즈마 토치와 냉도가니가 적용된 전자기 유도 용해장치를 이용하여 붕소와 인을 제거하였다. 플라즈마 토치 가스로는 아르곤, 스팀, 수소를 이용하였다. 붕소와 인의 제거율은 각각 94%와 96%를 달성하였으며, 최종 순도 6N급의 실리콘을 제조하였다.

• Korean Journal of Materials Research
• /
• v.12 no.4
• /
• pp.283-289
• /
• 2002

The E.M.F of the galvanic cell with fused salt was measured to determine the activities of zinc at 700-820K over the entire composition range of liquid Zn-Cd alloys. The cell used was as follows: (-) W ｜ Zn(pure) $Zn^{2+}(KCI-LiCl)$ ｜ Zn(in Zn-Cd alloy) ｜ W (+) The activities of zinc in the alloys showed positive deviation from Raoult's law over the entire composition range. The activity of cadmium and some thermodynamic functions such as Gibbs free energy, enthalpy, entropy were derived from the results by the thermodynamic relationship. The comparison of the results and the literature data was made. The liquid Zn-Cd alloy is found to be close to the regular solution. The concentration fluctuations in long wavelength limit, $S_{cc}(o)$, in the liquid alloy was calculated from the results.

• Restorative Dentistry and Endodontics
• /
• v.14 no.2
• /
• pp.1-4
• /
• 1989

To determine the thickness of coronal hard structure the minimal distance between pupal surface and outer surface of crown was measured by means of Bowley gauge on extracted first molars. Upper(28 teeth) and lower(24 teeth) were carefully collected from 30-39 years of age and male. The teeth were split mesio-distally through central pit. On the split surface various part which are deeply related in cavity preparation were measured (schematic drawing). The results were as follows: A : Distance from mesio-cervical enamel to pulp chamber surface. upper $2.63{\pm}0.19$(mm) Lower $2.18{\pm}0.27$(um) B : Distance from mesial chamber ceiling to mesial surface upper $2.75{\pm}0.34$ Lower $2.62{\pm}0.31$ C : Distance from mesial chamber ceiling to occlusal surface upper $3.82{\pm}0.51$ Lower $3.49{\pm}0.50$ D : Distance from distal chamber ceiling to occlusal surface upper $4.28{\pm}0.69$ Lower $3.90{\pm}0.52$ E : Distance from distal chamber ceiling to distal surface upper $2.79{\pm}0.45$ Lower $2.41{\pm}0.40$ F : Distance from disto cervical enamel to pulp chamber surface upper $2.49{\pm}0.24$ Lower $2.39{\pm}0.25$.