• 제목/요약/키워드: U/F

검색결과 1,924건 처리시간 0.031초

인터리브드 소프트 스위칭 부스트 컨버터의 입출력 리플 분석 (Input/Output Ripple Analysis of Interleaved Soft Switching Boost Converter)

  • 정두용;지용혁;김영렬;정용채;원충연
    • 전력전자학회논문지
    • /
    • 제17권2호
    • /
    • pp.182-189
    • /
    • 2012
  • In this paper, the input current and output voltage ripple of the soft switching interleaved boost converter was analyzed. Ripples of input current and output voltage with an interleaved method is analysed and as a result, the facts that it has lower ripple current than conventional interleaved method is verified. it means that a capacity of a main inductor can be reduced. Besides, a low capacitance of capacitor which means high lifetime and confidence can be used because of reducing ripples of output voltage. In order to verify the validity of the proposed converter used 10uF film capacitor, experiment was performed, and the efficiency of the proposed converter was measured with variable load and duty conditions.

오디 색소의 안정성 (Stability of Anthocyanin Pigment Extracted from Mulberry Fruit)

  • 강창수;마상조;조원대;김진만
    • 한국식품영양과학회지
    • /
    • 제32권7호
    • /
    • pp.960-964
    • /
    • 2003
  • 오디 색소인 안토시아닌 색소의 안정성에 대한 pH, 당, 유기산, 금속이온의 영향을 조사하였다. 오디 색소는 pH가 낮을수록 색소의 강도와 안정성이 증가하였다. Glucose, fructose, sucrose 및 maltose 첨가시 sucrose 첨가에 의해 색소 강도가 가장 많이 감소하였으며, glucose와 maltose는 다른 당류에 비해 비교적 적은 색소 강도의 변화를 보였다. Citric acid, maleic acid, tataric acid 및 acetic acid 첨가시 첨가농도가 증가할수록 색소 강도가 증가하였으며, 색소의 안정성에 대한 유기산의 첨가 효과는 maleic acid, acetic acid, citric acid, tartaric acid 순으로 나타났으며, 구리와 철 이온 첨가는 다른 금속이온에 비해 색의 강도가 감소하였다.

Cloning and Characterization of the Urease Gene Cluster of Streptococcus vestibularis ATCC49124

  • Kim Geun-Young;Lee Mann-Hyung
    • Journal of Microbiology and Biotechnology
    • /
    • 제16권2호
    • /
    • pp.286-290
    • /
    • 2006
  • A genomic library of Streptococcus vestibularis ATCC49124 was constructed in an E. coli plasmid vector, and the urease-positive transformants harboring the urease gene cluster were isolated on Christensen-urea agar plates. The minimal DNA region required for urease activity was located in a 5.6 kb DNA fragment, and a DNA sequence analysis revealed the presence of a partial ureI gene and seven complete open reading frames, corresponding to ureA, B, C, E, F, G, and D, respectively. The nucleotide sequence over the entire ure gene cluster and 3'-end flanking region of S. vestibularis was up to 95% identical to that of S. salivarius, another closely related oral bacterium, and S. thermophilus, isolated from dairy products. The predicted amino acid sequences for the structural peptides were 98-100% identical to the corresponding peptides in S. salivarius and S. thermophilus, respectively, whereas those for the accessory proteins were 96-100% identical. The recombinant E. coli strain containing the S. vestibularis ure gene cluster expressed a high level of the functional urease holoenzyme when grown in a medium supplemented with 1 mM nickel chloride. The enzyme was purified over 49-fold by using DEAE-Sepharose FF, Superdex HR 200, and Mono-Q HR 5/5 column chromatography. The specific activity of the purified enzyme was 2,019 U/mg, and the Michaelis constant ($K_{m}$) of the enzyme was estimated to be 1.4 mM urea. A Superose 6HR gel filtration chromatography study demonstrated that the native molecular weight was about 196 kDa.

Measurement of EUV (Extreme Ultraviolet) and electron temperature in a hypocycloidal pinch device for EUV lithography

  • Lee, Sung-Hee;Hong, Young-June;Choi, Eun-Ha
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2010년도 제39회 하계학술대회 초록집
    • /
    • pp.108-108
    • /
    • 2010
  • We have generated Ne-Xe plasma in dense plasma focus device with hypocycloidal pinch for extreme ultraviolet (EUV) lithography and investigated an electron temperature. We have applied an input voltage 4.5 kV to the capacitor bank of 1.53 uF and the diode chamber has been filled with Ne-Xe(30%) gas in accordance with pressure. If we assumed that the focused plasma regions satisfy the local thermodynamic equilibrium (LTE) conditions, the electron temperature of the hypocycloidal pinch plasma focus could be obtained by the optical emission spectroscopy (OES). The electron temperature has been measured by Boltzmann plot. The light intensity is proportion to the Bolzman factor. We have been measured the electron temperature by observation of relative Ne-Xe intensity. The EUV emission signal whose wavelength is about 6~16 nm has been detected by using a photo-detector (AXUV-100 Zr/C, IRD) and the line intensity has been detected by using a HR4000CG Composite-grating Spectrometer.

  • PDF

야금학적 정련 통합 공정을 이용한 태양전지용 실리콘 제조 기술 (Production of solar grade silicon by using metallurgical refinement)

  • 장은수;박동호;문병문;민동준;류태우
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2011년도 추계학술대회 초록집
    • /
    • pp.54.2-54.2
    • /
    • 2011
  • 야금학적 정련 공정 중 슬래그 처리, 일방향 응고, 플라즈마-전자기유도용해 공정을 적용한 태양전지용 실리콘 제조 기술에 관한 연구를 수행하였다. 원소재인 금속급 실리콘을 제조하기 위해원재료로 규석, 코크스(Cokes), 숯, 그리고 우드칩(Wood chip)을 사용하였으며, 150kW급 DC 아크로(Arc furnace)를 이용하여 순도 99.8% 금속급 실리콘을 제조하였다. 제조된 용융 상태의 금속급 실리콘은 슬래그와 반응시켜 불순물을 제거하였다. SiO2-CaO-CaF2 계의 슬래그를 이용하였으며, 금속급 실리콘과 슬래그의 질량비 및 반응 시간에 따른 실리콘 불순물 특성을 평가하였다. 이후 고액 계면이 제어 가능한 일방향 응고 장치를 이용하여 금속불순물을 제거하였다. 고액상태의 온도 조건 및 응고 시간에 따른 불순물 농도 변화를 평가하였으며, 순도 6N급의 실리콘을 제조하였다. 마지막 공정으로 스팀 플라즈마 토치와 냉도가니가 적용된 전자기 유도 용해장치를 이용하여 붕소와 인을 제거하였다. 플라즈마 토치 가스로는 아르곤, 스팀, 수소를 이용하였다. 붕소와 인의 제거율은 각각 94%와 96%를 달성하였으며, 최종 순도 6N급의 실리콘을 제조하였다.

  • PDF

기전력법을 이용한 용융 Zn-Cd 합금중 Zn의 활동도 측정 (Activity Measurement of Zn in Liquid Zn-Cd Alloy Using EMF Method)

  • 정성엽;정우광;박종진
    • 한국재료학회지
    • /
    • 제12권4호
    • /
    • pp.283-289
    • /
    • 2002
  • The E.M.F of the galvanic cell with fused salt was measured to determine the activities of zinc at 700-820K over the entire composition range of liquid Zn-Cd alloys. The cell used was as follows: (-) W | Zn(pure) $Zn^{2+}(KCI-LiCl)$ | Zn(in Zn-Cd alloy) | W (+) The activities of zinc in the alloys showed positive deviation from Raoult's law over the entire composition range. The activity of cadmium and some thermodynamic functions such as Gibbs free energy, enthalpy, entropy were derived from the results by the thermodynamic relationship. The comparison of the results and the literature data was made. The liquid Zn-Cd alloy is found to be close to the regular solution. The concentration fluctuations in long wavelength limit, $S_{cc}(o)$, in the liquid alloy was calculated from the results.

치수강(齒髓腔)과 치관외면(齒冠外面)과의 최단거리(最短距離)에 관(關)한 실측연구(實測硏究) (A STUDY ON MEASUREMENT OF MINIMAL DISTANCE BETWEEN PULP CHAMBER AND CORONAL SURFACE)

  • 김영해
    • Restorative Dentistry and Endodontics
    • /
    • 제14권2호
    • /
    • pp.1-4
    • /
    • 1989
  • To determine the thickness of coronal hard structure the minimal distance between pupal surface and outer surface of crown was measured by means of Bowley gauge on extracted first molars. Upper(28 teeth) and lower(24 teeth) were carefully collected from 30-39 years of age and male. The teeth were split mesio-distally through central pit. On the split surface various part which are deeply related in cavity preparation were measured (schematic drawing). The results were as follows: A : Distance from mesio-cervical enamel to pulp chamber surface. upper $2.63{\pm}0.19$(mm) Lower $2.18{\pm}0.27$(um) B : Distance from mesial chamber ceiling to mesial surface upper $2.75{\pm}0.34$ Lower $2.62{\pm}0.31$ C : Distance from mesial chamber ceiling to occlusal surface upper $3.82{\pm}0.51$ Lower $3.49{\pm}0.50$ D : Distance from distal chamber ceiling to occlusal surface upper $4.28{\pm}0.69$ Lower $3.90{\pm}0.52$ E : Distance from distal chamber ceiling to distal surface upper $2.79{\pm}0.45$ Lower $2.41{\pm}0.40$ F : Distance from disto cervical enamel to pulp chamber surface upper $2.49{\pm}0.24$ Lower $2.39{\pm}0.25$.

  • PDF

곡물류의 형질전환에 관한 연구.II. Electroporation에 의해 벼 원형질체로 도입된 유전자의 발현 (Studies on the Induction of Transformation in Cereal Plants.II. Expression of Gene Transferred into Rice Protoplasts by Electroporation)

  • 황백;황성진;임욱빈;임형탁;강영희
    • KSBB Journal
    • /
    • 제5권4호
    • /
    • pp.323-327
    • /
    • 1990
  • Protoplasts isolated from embryogenic cell suspensions were electroporated in buffered solutions containing plasmid DNA of pBI121. Transient GUS (beta-glucuronidase) activity measurement and selection for kanamycin resistent showed that expression of foreign genes and stable loransformation were achieved. GUS transient gene expression was increased by increasing DNA concentration of pBI121 plasmid and affected by the level of the applied voltage. An optimal level of GUS activity was obtained after electroporation with a pulse of 200 voltage/1180 uF. Protoplast viability was up to the 60% at the optimal voltage. Cell colonies resistent to 200$\mu\textrm{g}$/ml kanamycin were selected in agar medium and identified by histochemical GUS assay.

  • PDF

마젤란 은하내 외계행성 탐색

  • 이재우;김승리;이충욱;박병곤;정선주;류윤현;구재림
    • 천문학회보
    • /
    • 제36권2호
    • /
    • pp.120.1-120.1
    • /
    • 2011
  • 현대 천문학의 주요한 이슈 중 하나인 외계행성은 570개 이상 발견되었는데, 이들 모두 우리 은하내 외계행성들이다. 우리는 KMTNet 광시야 관측시스템을 이용하여 마젤란 은하내 외계행성을 Transit 방법으로 탐색 관측하여 외부은하 최초의 외계행성을 발견하고자 한다. 이제까지 알려진 Transit 행성들의 별표면 통과시간(transit duration)은 대부분 100-300분 사이에 분포하기 때문에, 이 현상의 검출은 최대 10분의 시간분해능을 필요로 한다. 한편, KMTNet 망원경은 마젤란 은하내 21등급의 별을 I 필터에서 10분의 노출로 1%의 측정정밀도를 얻을 수 있고, 8-10미터급 대형망원경을 이용하면 태양질량의 21등급 별을 공전하는 목성형 행성들의 분광후속 관측이 가능하다. 우리는 KMTNet으로 마젤란 은하내 19-21등급에 있는 F-G형 주계열성들과 청색수평가지별들(blue horizontal branch star)을 I 필터(관측 시작, 중간, 끝 시간에는 V 필터도 사용)에서 10분의 노출로 시계열 측광 관측하면, 다수의 Transit 외계행성을 발견할 수 있을 것으로 기대한다. 이와 더불어, 수년의 장시간 관측자료로부터 RR Lyr, ${\delta}$ Sct 및 식변광성의 극대/극심시각을 정밀하게 측정하여 Timing 방법으로 항성계 주위를 공전하는 장주기 외계행성을 발견할 수 있을 뿐만 아니라, 중력렌즈(self-lensing) 현상을 보이는 외계행성도 검출가능하다.

  • PDF

Assessment of RANS Models for 3-D Flow Analysis of SMART

  • Chun Kun Ho;Hwang Young Dong;Yoon Han Young;Kim Hee Chul;Zee Sung Quun
    • Nuclear Engineering and Technology
    • /
    • 제36권3호
    • /
    • pp.248-262
    • /
    • 2004
  • Turbulence models are separately assessed for a three dimensional thermal-hydraulic analysis of the integral reactor SMART. Seven models (mixing length, k-l, standard $k-{\epsilon},\;k-{\epsilon}-f{\mu},\;k-{\epsilon}-v2$, RRSM, and ERRSM) are investigated for flat plate channel flow, rotating channel flow, and square sectioned U-bend duct flow. The results of these models are compared to the DNS data and experiment data. The results are assessed in terms of many aspects such as economical efficiency, accuracy, theorization, and applicability. The standard $k-{\epsilon}$ model (high Reynolds model), the $k-{\epsilon}-v2$ model, and the ERRSM (low Reynolds models) are selected from the assessment results. The standard $k-{\epsilon}$ model using small grid numbers predicts the channel flow with higher accuracy in comparison with the other eddy viscosity models in the logarithmic layer. The elliptic-relaxation type models, $k-{\epsilon}-v2$, and ERRSM have the advantage of application to complex geometries and show good prediction for near wall flows.