• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2007년도 한국지능정보시스템학회
• /
• pp.286-296
• /
• 2007

본 연구에서는 유비쿼터스 환경에서 시시각각으로 변하는 고객의 요구사항을 만족시키기 위해 상호 협력을 시도하는 다중 에이전트들이 의사결정을 수행할 경우 발생할 수 있는 충돌의 해결을 지원하는 지능적인 온톨로지 관리 모듈(intelligent-Ontology Management Module, i-OMM)과 다중에이전트 관리 모듈(Multi-agent Coordination Module, MACM)을 포함하는 u-DSS 포털을 제안한다. 개별 에이전트들은 온톨로지와 문제해결을 위한 프로시저 등을 이용해 자신의 문제를 해결하는 것을 기본으로 한다. 그러나 다른 에이전트들과 협력을 통해 문제를 해결해야 할 경우에는 먼저 개별 에이전트들이 보유한 각 온톨로지의 통합 및 데이터간의 충돌 해결이 요구된다. i-OMM은 개별 에이전트들이 보유하고 있는 이질적인 온톨로지를 통합하여, 문제해결을 위한 하나의 통합된 새로운 동적 온톨로지 뷰(integrated ontology view, IOV)의 생성을 지원한다. 온톨로지 통합과제에서 생성된 IOV는 사례로 저장되고 유사한 문제 해결에 재사용된다. MACM은 고객 에이전트들의 요구사항 변화에 따라 관련 개별 에이전트들 간의 데이터 충돌을 해결하여 에이전트들의 의사결정과정을 지원한다. 따라서 i-OMM과 MACM을 이용한 유비쿼터스 컴퓨팅 환경에서 분산된 에이전트들의 협력적 문제 해결을 지원하는 시스템을 유비쿼터스 의사결정지원 시스템 포탈(ubiquitous decision support system, u-DSS Portal)이라고 지칭한다. 본 연구에서 제안된 알고리즘의 활용 대상은 고객, 판매자, 제조업체, 및 배송업체의 배송차량들의 에이전트들로 구성된 u-fulfillment 시스템으로 한다.

• 정보통신설비학회논문지
• /
• 제8권3호
• /
• pp.122-131
• /
• 2009

Ubiquitous-Transportation sensor network is able to realize a vehicle ad-hoc network. Since there are some problems in an existing ITS system, the new technology and traffic information strategies are requirements in this advanced system, u-TSN. The purposes of this paper is to introduce the components on u-TSN system, establish new traffic strategies for this system, and then evaluate these strategies by making a comparative study of ITS and using micro traffic simulator, AIMSUN. The strategy evaluated by AIMSUN is position-based multicast strategy which provides traffic information to vehicles using V2I (vehicle to Infrastructure) communication. This paper focuses on the providing real-time route guidance information when congestion is occurred by the incidents. This study estimates total travel time on each route by API modules. Result from simulation experiments suggests that position-based multicast strategy can achieve more optimal network performance and increased driver satisfaction since the total accumulated travel times of both the major road and the total system on position-based multicast strategy are less than those on VMS.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제10권1호
• /
• pp.50-63
• /
• 2002

The Karman boundary-layer has been numerically investigated for the disturbance wave number, wave velocity, azimuth angle and radius (Reynolds number, Re). The disturbed flow over rotating disk can lead to transition at a much lower Re than that of the well-known Type I instability. This early transition is due to the excitation of the Type II. Presented are the neutral stability results concerning these instabilities by solving newly formulated stability equations with consideration of whole convective terms. When the present numerical results are compared with the previously known results, the value of critical Re corresponding to Type I is moved from ${Re}_{c.1}$=285.3 to 270.2 and the value corresponding to Type II from ${Re}_{c.2}$=69.4 to 36.9, respectively. Also, the corresponding wave number is moved fro)m $k_1$=0.378 to 0.386 for Type I; from $k_2$=0.279 to 0.385 for Type II. For Type II, the upped limit of wave number and azimuth angle is $k_u$=0.5872, $\varepsilon_u$=$-17.5^{\circ}$, while its lower limit is near $k_u$=0, $\varepsilon_u$=$-28.4^{\circ}$. This implies that the disturbances will be relatively fast amplified at small Re and within narrow bands of wave number compared with the previous results.

• Structural Engineering and Mechanics
• /
• 제75권5호
• /
• pp.559-569
• /
• 2020

In the present study, the fracture toughness of U-shaped notches made of aluminum alloy Al7075-T6 under combined tension/out-of-plane shear loading conditions (mixed mode I/III) is studied by theoretical and experimental methods. In the experimental part, U-notched test samples are loaded using a previously developed fixture under mixed mode I/III loading and their load-carrying capacity (LCC) is measured. Then, due to the presence of considerable plasticity in the notch vicinity at crack initiation instance, using the Equivalent Material Concept (EMC) and with the help of the point stress (PS) and mean stress (MS) brittle failure criteria, the LCC of the tested samples is predicted theoretically. The EMC equates a ductile material with a virtual brittle material in order to avoid performing elastic-plastic analysis. Because of the very good match between the EMC-PS and EMC-MS combined criteria with the experimental results, the use of the combination of the criteria with EMC is recommended for designing U-notched aluminum plates in engineering structures. Meanwhile, because of nearly the same accuracy of the two criteria and the simplicity of the PS criterion relations, the use of EMC-PS failure model in design of notched Al7075-T6 components is superior to the EMC-MS criterion.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.540-543
• /
• 2010

군용 SBC에 주로 사용되는 중앙 처리 장치(Central Processing Unit)는 주로 Power PC의 계열이며 Freescale사의 G4 계열인 74xx 프로세서가 주로 사용된다. 이러한 CPU인 7447A는 System Controller를 통하여 SBC 내의 주 기억 장치와 통신을 한다. 본 논문에서는 위와 같은 SBC의 구조에서 System Controller와 DDR 메모리 소자 간 I/F를 구현함에 있어 PCB적층 구조, 소자들의 Layout, 임피던스매칭과 Rugged 환경 Level에서 적용 되는 군 환경에서 동작 가능한 DDR 메모리를 모듈로 설계하여 구현하였다. 또한, 군용환경에 적용하기위한 SBC의 형상은 주로 6U, 3U의 표준 형태로 설계되어져야 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.24-33
• /
• 2000

This paper investigates the relationship between J-integral and crack tip opening displacement, ${\delta}_t$ using Gordens results of numerical analysis. Estimation were carried out for several strength levels such as ultimate, flow, yield, ultimate-flow, flow-yield stress to determine the influence of strain hardening and the ratio of crack length to width on the $J-{\delta}_t$ relationship. It was found that for SE(B) specimens, the $J-{\delta}_t$ relationship can be applied to relate J to ${\delta}_t$ as follows $J=m_j{\times}{\sigma}_i{\times}{\delta}_t$ where $m_j=1.27773+0.8307({\alpha}/W)$, ${\sigma}_i:{\sigma}_U$, ${\sigma}_{U-F}={\frac{1}{2}} ({\sigma}_U+{\sigma}_F$), ${\sigma}_F$, ${\sigma}_F}$ $Y=({\sigma}_F+{\sigma}_Y)$, ${\sigma}_Y$

• International Journal of Contents
• /
• 제1권2호
• /
• pp.18-21
• /
• 2005

The following suggested algorithm is completed care report for the family medical history. Rn=$U\;Pnj+U\;Dn^i$ : (j=1,2,...,j), (i=1,2,...,i), (n=1,2,...,n) The Rn(completed care report) integrates comprehensive patients reports ranging from patient $P^2\;to\;P^j$ including $P^1$ (oneself) with the doctors' care reports up to the care No. no by i number of doctors ($D^1$ =doctor in charge, $D^{2,3...i}$=doctors on corporation program.) This approach, since a participation in a family membership effectuates all of family members, can minimize the membership fees, thus enabling inter-family health care on a home doctor basis.

• East Asian mathematical journal
• /
• 제39권5호
• /
• pp.523-528
• /
• 2023

Let S_n = [S(i, j)]_1≤i,j≤n and S^*_n = [S(i + j, j)]_1≤i,j≤n where S(i, j) is the Stirling number of the second kind. Choi and Jo [On the determinants of the square-type Stirling matrix and Bell matrix, Int. J. Math. Math. Sci. 2021] obtained the diagonal entries of matrix U in the LU-factorization of S^*_n for calculating the determinant of S^*_n, where L = S_n. In this paper, we compute the all entries of U in the LU-factorization of matrix S^*_n. This implies the identities related to Stirling numbers of both kinds.

• Journal of Radiation Protection and Research
• /
• 제26권2호
• /
• pp.73-78
• /
• 2001

3"X3" NaI 스펙트럼의 조사선량 변환계수를 구하기 위해, 조사선량률이 $4{\sim}23{\mu}R\;h^{-1}$인 29개 지역에서 가압전리함 검출기로 조사선량률을 측정하고, 동시에 3"X3"와 4"X4" NaI 검출기로 스펙트럼을 측정하였다. 총에너지 방법의 조사선량 변환계수는 측정된 조사선량률과 스펙트럼 에너지의 선형적 비례관계를 사용하여 구하였다. 에너지대 방법의 조사선량 변환계수를 구하기 위해 NCRP에서 권고하는 4"X4" NaI 검출기에 대한 에너지대 방법의 조사선량 변환계수를 4"X4" NaI 스펙트럼에 적용하여 $^{40}K,\;^{238}U,\;^{232}Th$ 계열의 조사선량률을 계산하였다. 이렇게 계산된 $^{232}Th$ 계열의 조사선량률과 $^{232}Th$ 계열을 대표하는 2614keV 피크 영역면적의 선형적 비례관계를 이용하여 3"X3" NaI 검출기 스펙트럼에 대한 $^{232}Th$ 계열 조사선량 변환계수를 구하였다. $^{40}K$ 및 $^{238}U$ 계열의 조사선량 변환계수도 유사한 방법으로 구해졌다.

• 한국독어학회지:독어학
• /
• 제6집
• /
• pp.185-219
• /
• 2002

Die vorliegende Arbeit soll einen Beitrag zu $Verst\"{a}ndnis$ des Konjunktivs(=Konj.) leisten. Insbesondere geht es um die Verwendung des Konj. in der indirekten Rede. Die Belegmaterialien zum Konjunktivgebrauch wurden politischen und wissenschaftlichen Zeitungsartikeln entnommen, im Wesentlichen der 'Welt' und der 'FAZ'. Obwohl in der deutschen Gegenwartssprache offenbar ein Wandel im Modusgebrauch im Allgemeinen var sich geht, lasst sich sagen, dass in den Pressemeldungen der Kanj. I $durchg\"{a}ngig$ verwendet wird. Die Mouswahl $f\"{u}r$ den Konj. I ist nicht nur ein Kennzeichen $f\"{u}r$ mittelbare Redewiedergabe, sandern sie kann in bestimmten $F\"{a}llen$ ein Sprechereinstellung $ausdr\"{u}cken$, da der Konj. I in den $dass-Kamplements\"{a}tzen$ allgemeiner an $Nichtfaktivit\"{a}t$ gebunden ist $F\"{u}r$ die sog. 'berichtete Rede' ist der Konj. I als Zitierzeichen obligatorisch. Bei der morphologischen Betrachtung wurden die Charakteristika der morphologischen Formbildung im Konj. beschrieben. Im Kanj. werden alle Farmen mit 'e' gebildet. Es wird angenommen, dass der Schwa-Laut des Kanj. in der Regel varhanden sei, es aber nicht ein Marphem sei. Die Ersetzung des Kanj. I durch den Kanj. II in der indirekten Rede hat ihren Grund in der mangelnden $Distinktivit\"{a}t$ zum Indikativ $Pr\"{a}sens$. Im Kanj. II wird der Umlaut als Konjunktivmarker der starken Verben angesehen. Im Unterschied zu den starken Verben fallen Indikativ und Kanj. im $Pr\"{a}teritum$ der schwachen Verben, die keinen Vokalwechsel haben, formal zusammen. In diesem Fall wird der Kanj. durch die wiirde-Konstruktian ersetzt. Im Rahmen der syntaktischen Betrachtung wurden die Konkurrenzformen vorgestellt. Die indirekte Rede kann durch vielerlei grammatische Mittel angezeigt werden. In diesen $F\"{a}llen$ wird statt des Hauptsatzes eine grammatisch-lexikalische Paraphrase (mit Hilfe von $Pr\"{a}positionalgruppen$ mit nach, zufolge oder laut beispielsweise, und wie- $S\"{a}tzen,\; dar\"{u}ber$ hinaus Modalverben sollen und wollen) verwendet. Schliesslich wurde darauf hingewiesen, dass die $w\"{u}rde-Paraphrase$ zwar eine Umschreibung des Konj. sein kann, dass einer solchen $F\"{u}gung$ aber der $Temporalit\"{a}tscharakter$ nicht abgesprochen wird, insofern die $Temporalit\"{a}t\;mit\;der\;Modalit\"{a}t$ zu tun h