• The Journal of Korean Society of Virology
• /
• v.27 no.2
• /
• pp.227-237
• /
• 1997

In order to search for anti-Herpes simplex virus (HSV) type-1 agents from Korean medicinal herbs and Korean traditional prescriptions (herb complexes), we selected 80 medicinal herbs and 45 prescriptions, based on a review of the Korean traditional medicine books. Both methanol extracts and boiling-water extracts were tested by means of the MTT assay (tetrazolium based colorimetric assay). Ten of the 125 methanol extracts: CM-11, CM-18, CM-19, CM-21, CM-22, CM-39, MM-3, MM-18, MM-29, MM-73 (see explanation of nomenclature below), showed efficacy against HSV-1. Twelve of the water extracts: CW-2, CW-3-I, CW-3-II, CW-18, MW-3, MW-5 MW-6, MW-12, MW-47, MW-69, MW-73 and MW-79 were active. #3 (individual herb) and #73 (individual herb) were interesting because both water and methanol extracts were active. Especially, #3 is a part of composition of Hong-il-$laksamd{\check{u}}ngbang$ and Hojanghaedokt'ang which have anti-HSV-1 activitives. The SI value of MW-69 and CW-18 was relative high as $10.2{\pm}0.7$ and $11.8{\pm}2.2$. The cytotoxic effect on Vera cells of $Panch'{\check{o}}nch'onch'{\check{o}}ngbang$, Taraxacum platycarpum H. Dahlst. and acycloguanosine was determined by MTT assay. Water extracts of $Panch'{\check{o}}nch'onch'{\check{o}}ngbang$ (prescription) and Taraxacum platycarpum H. Dahlst. showed very weak cytotoxic effects on Vero cells at > $100\;{\mu}g/ml$ but acycloguanosine showed strang cytotoxic effects on Vera cells at > $100\;{\mu}g/ml$. As a result, #3, #73, MW-69 and CW-18 are considered as potentially useful for anti-HSV-1 agent and will be the focus of further research. Abbreviations: CM - methanol extracts of traditional prescriptions; CW - water extracts of traditional prescriptions; MM - methanol extracts of individual herbs; MW - water extracts of individual herbs.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.4
• /
• pp.59-77
• /
• 2000

This study was carried out to investigate on several factors, which contaminative the water quality through the water pipe during feeding water, in 42 largescaled apart-ments(total 84 cases) and assayed the Volatile Organic Compounds(VOCs) and concen-tration of heavy metals that inflow and outflow in reservior water in Jeonnam area(Mokpo, Suncheon, Yeosu) from January 1999 to December 1999. The results obtained were summarized as follows ; 1. The quality of the water pipe composition in the order of frequency in the quality of water pipes were Copper(45.2%)> Zinc(38.9%)> Stainless steel(9.5%)> PVC(4.8%)> PM(2.4%) in observing 42 sites. All of the drain pipes were used the cast iron quality. 2. The result of certification curve from 12 items(17kind) of VOCs was $1.0-4.0{\mu{g}}/{\ell}$ range, a coefficient of correlation was shown 0.99 over. A MDL of each substance range was within $0.1-1.0{\mu{g}}/{\ell}$. 3. The result of the assay, 5 kinds(Viny chloride, Dichloromethane, Ethylbenzene, M,P-xylene, Styrene) of the VOCs of 14 kinds was not detected and the other items were detected slightly. The detection rate of one item and over in total VOCs samples, were 25.9% in inflow and 27.9% in outflow. And frequency of detect in inflow/outflow of THM(Chloroform, Bromodichloro-methane, Dibromochloromethane, Bromoform) were shown higher than 94.1%, 97.0% each stages. It comes to the conclusion that all of the samples were reason able for drinking water standards. 4. The coefficient of correlation were reasonable, it shown 0.999 over in $0.1-1.0{\mu{g}}/{\ell}$ of a measuring range conditions of 4kinds in organic substance(Zn, Cu, Fe, Mn). 5. The results were showed suitability in 78 cases(92.9%) and unsuitability in 6 cases (7.1%), in 84 cases of in organic substances. Compare to inflow stage, mean concentrations of heavy metal, were increased slightly in Zn, Cu, Fe except Mn than outflow stage. The result of the mean concentration in organic substance inflow and outflow in the apartment water tank using Pair-compared T-test, in 95% reliance index, were $0.179mg/{\ell}(0.151-0.307mg/{\ell})$ in Zinc, $0.136mg/{\ell}(0.113-0.230mg/{\ell})$ in Copper, $0.052mg/{\ell}(0.048-0.098mg/{\ell})$ in Fe, and there was a bit growing tendency but there was no differece in Mn. 6. The mean concentration of Copper which used Cu pipe as a water supply pipe in apartment were $0.216mg/{\ell}(0.161-0.338mg/{\ell})$ in case of the Zine pipe were $0.286mg/{\ell}(0.204-0.435mg/{\ell})$. It shows that the detection rate was more higher than the other material used in Cu or Zn as the water supply pipe. We supposed to Cu and Zn substance were gushing out water supply pipe.

• Korean Journal of Health Education and Promotion
• /
• v.6 no.2
• /
• pp.23-39
• /
• 1989

There have been a lot of considerable. discussion and debate surrounding the management model in the health insurance management system and opinions regarding the management operating cost. It is a well known fact that there have always been dissenting opinions and debates surrounding the issue. The management operating cost varies according to the scale of the management organization and component members characteristics of the insurance carrier. Therefore, it is necessary to examine and compare the management operating cost to the simulated management models developed to cover those eligible for the health insurance scheme in this country. Since the management operating cost can vary according to the different models of management, four alternative management models have been established based on the critical evaluation of existing theories concerned, as well as on the basis of the survey results and simulation attempts. The first alternative model is the Unique Insurance Carrier Model(Ⅰ) ; desigened to cover all of the people with no classification of insurance qualifications and finances from the source of contribution of the insured, nationwide. The second is the Management Model of Large-scale District Insurance Carrier(Ⅱ) ; this means the Korean society would be divided into 21 large districts; each having its own insurance carrier that would cover the people in that particular district with no classification of insurance qualifications arid finances as in Model I. The third is the Management Model of Insurance Carrier Divided by Area and Classified with Occupation if Largescale (Ⅲ) ; to serve the self-employed in the 21 districts divided as in Model Ⅱ. It would serve the employees and their dependents by separate insurance carriers in large-scale similar to the area of the district-scale for the self-employed, so that the insurance qualifications and finances would be classified with each of the insurance carriers: The last is the Management Model of the Multi - insurance Carrier (Ⅳ) based on the Si. Gun. Gu area which will cover their own self- employed people in the area with more than 150 additional insurance carriers covering the employees and their dependents. The manpower necessary to provide services to all of the people according to the four models is calculated through simulation trials. It indicates that the Management Model of Large-scale District Insurance Carrier requires the most manpower among the four alternative models. The unit management operating costs per the insured individuals and covered persons are leveled with several intervals based on the insurance recipients. in their characteristics. The interval levels derived from the regression analysis reveal that the larger the scale of the insurance carriers is in the number of those insured and covered. the more the unit management operating cost decreases. significantly. Moreover. the result of the quadratic functional formula also shows the U-shape significantly. The management operating costs derived from the simulated calculation. on the basis of the average salary and related cost per staff- member of the Health Insurance Societies for Occupational Labours and Korean Medical Insurance Corporation for the Official Servants and Private School Teachers in 1987 fiscal year. show that the Model of Multi-insurance Carrier warrants the highest management operating cost. Meanwhile the least expensive management operating cost is the Management Model of Unique Insurance Carrier. Insurance Carrier Divided by Area and Classified with Occupation in Large-scale. and Large-scale District Insurance Carrier. in order. Therefore. it is feasible to select the Unique Insurance Carrier Model among the four alternatives from the viewpoint of the management operating cost and in the sense of the flexibility in promoting the productivity of manpower in the human services field. However. the choice of the management model for health insurance systems and its application should be examined further utilizing the operation research analysis for such areas as the administrative efficiency and factors related to computer cost etc.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.E
• /
• pp.311-324
• /
• 1994

The quantitative knowledge of N $O_{\gamma}$ (＝N $O_{x}$ ＋HN $O_3$＋/PAN＋N $O_3$ ＋$N_2$ $O_{5}$ ＋HN $O_2$＋N $O_3$$^{-10}$ ＋organic nitrates＋......)distribution is essential in tropospheric chemistry, especially, especially that related to understanding the processes leading to ozone production. Ambient concentrations of NO, N $O_2$, HN $O_3$ and PAN as well as total N $O_{\gamma}$ were measured during June and early July 1992 at a rural site(Candor, NC), in the central Piedmont region of NC. The measurements of N $O_{\gamma}$ species were made in an effort to provide a comprehensive understanding of nitrogen chemistry and to investigate the total nitrogen budget at the site. N $O_{\gamma}$, N $O_2$, and NO showed diurnal variations with maxima in the morning. The maximum N $O_{\gamma}$ concentration reached was 14.5 ppbv, and the maximum concentrations of NO and N $O_2$ were 5.4 and 7.8 PPbv, respectively. The mean N $O_{\gamma}$ concentration as found to be 2.88$\pm$1.58 ppbv(n=743). The mean concentrations of NO and N $O_2$, were found to be 0.15 $\pm$ 0.29 ppbv(n＝785) and 1.31 $\pm$ 0.99 ppbv(n＝769). Products of photochemical oxidants, (N <$O_{\gamma}$-N $O_{x}$ ), such as HN $O_3$ and PAN, as well as ozone showed diurnal variation with maxima in the afternoon and minima at night The fractions of individual reactive nitrogen species to total N $O_{\gamma}$ were investigated and contrasted to the results from remote marine site and rural continental sites. N $O_{x}$ was the major species to total N $O_{\gamma}$(45%). NO concentrations appeared to be nearly constant whether the Prevailing winds were from continental areas or from oceanic areas. Linear regression of $O_3$ with (N $O_{\gamma}$- N $O_{x}$ )/N $O_{\gamma}$ (i.e. percent N $O_{x}$ converted to the photochemical products of N $O_{\gamma}$) yielded ( $O_3$) ＝25.8 〔 N $O_{\gamma}$-N $O_{x}$ 〕/(N $O_{\gamma}$) ＋27, ( $r^{2}$＝0.58). The regression intercept is interpreted as the ozone back ground (intercept=27ppbv) and the slope suggests that 8.6 molecules of ozone are formed per molecule of N $O_{x}$ oxidized products (when the average N $O_{\gamma}$ concentration, about 3 ppbv at the site, is used). The N $O_{x}$ N $O_{\gamma}$ ratio was used as an indicator of the chemical age of airmasses and the ratio showed strong positive correlations with HN $O_3$( $r^{2}$=0.58), PAN ( $r^{2}$=0.46) and $O_3$( $r^{2}$=0.62). Larger N $O_{\gamma}$ and N $O_{x}$ N $O_{\gamma}$ ratio were found when winds came from continental sides. It may suggest that synoptic meteorological conditions and transport of N $O_{x}$ are important in the distribution of N $O_{\gamma}$ and its relationship with photochemical oxidants at the site.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Korean Journal of Weed Science
• /
• v.9 no.3
• /
• pp.201-213
• /
• 1989

About 233 weed species belonging to 54 families mainly occurring in summer were observed in cultivated land and its surrounding area in Cheju Island. The compositae was the most widely occurring family covering 41 weed species, followed by 28 species in gramineae, 14 in labiatae, 13 in leguminasae and 12 in polygonaceae etc.. In terms of the lands classified about 126 species in 39 families were observed in upland ared and 38 species in 20 families occurred in lowland area, 108 species in 36 families in orchard and 214 species in 50 families observed in non-cultivated area. The most dominant weed species in Cheju Island were Portulaca oleracea, Digitaria sanguinalis in both the upland and orchard, Monochoria vaginalis, Cyperus amuricus in lowland, and Digitaria sanguinalis, Artemisia princeps, Partulaca oleracea in non-cultivated land area. There were two communities in upland area, such as Phyllanthus urinaria, Siegesbeckia orinexitalis etc., and Cephalonaplos segetum, Mosla dianthera etc.. The lowland area composed of one major community like Onenanthe javanica, and Eleocharis acicularis. The orchard consisted of the communities of Stellaria aquatics, Viola mandshurica etc., and Justicia procumbens, Varedellia crustacea etc.. The non-cultivated land composed of two major communities like Amplicarpaed edgeworthii, Lactuca indica etc., and Clematis appiiforia, Aster hispidus etc..

• The Korean Society of Law and Medicine
• /
• v.15 no.2
• /
• pp.367-397
• /
• 2014

Dans le contentieux m$\acute{e}$dical, il est difficile de prouver l'existence d'un lien de causalit$\acute{e}$ entre la faute m$\acute{e}$dicale et les pr$\acute{e}$judices subis par la victime. R$\acute{e}$partir bien de façon raisonnable la charge de la preuve du lien causal est alors une des questions pr$\acute{e}$occup$\acute{e}$es par la doctrine cor$\acute{e}$enne. La Cour supr$\hat{e}$me cor$\acute{e}$enne semble toutefois facilliter l'indemnisation des victimes dans les cas o$\grave{u}$ la responsabilit$\acute{e}$ du m$\acute{e}$decin a ${\acute{e}}t{\acute{e}}$ mise en cause, et cela en admettant des fois une solution op$\acute{e}$rant un renversement de la charge de la preuve du lien causal. Une telle attitude a ${\acute{e}}t{\acute{e}}$ m$\hat{e}$me affirm$\acute{e}$e dans un arr$\hat{e}$t rendu r$\acute{e}$cemment en cas de dommage caus$\acute{e}$ par le fait du produit de sant$\acute{e}$, notamment pour le cas de contamination virale par voie de transfusion. La Cour a $\acute{e}$galement reconnu que l'action se pr$\acute{e}$scrit $\grave{a}$ partir du moment de la consolidation du pr$\acute{e}$judice. Aux termes de cette $\acute{e}$tude, on pourra constater que le juge français reconna$\hat{i}$t aussi l'assouplissement de la charge de la preuve du lien de causalit$\acute{e}$ en mati$\acute{e}$re d'action m$\acute{e}$dicale. Il faudra toutefois souligner que le ph$\acute{e}$nom$\acute{e}$ne ne soit pas g$\acute{e}$n$\acute{e}$ralis$\acute{e}$ en droit français, d'autant plus que la pr$\acute{e}$somption de l'existence de la causalit$\acute{e}$ en la mati$\grave{e}$re a $\acute{e}$t$\acute{e}$ admise de mani$\grave{e}$re restrictive par la l$\acute{e}$gislation sp$\acute{e}$cifique. Tel $\acute{e}$tait notamment le cas pour les accidents de la contamination par le virus du sida ou de l'h$\acute{e}$patite C survenus apr$\grave{e}$s la transfusion. En d$\acute{e}$finitive, on peut dire qu'en droit français, le principe est maintenu en cas de manquement $\grave{a}$ une obligation de r$\acute{e}$sultat n$\acute{e}$e du contrat m$\acute{e}$dical, tandis que la Cour de cassation admet parfois en mati$\grave{e}$re de droit commun de la responsabilit$\acute{e}$ contractuelle la pr$\acute{e}$somption de causalit$\acute{e}$ en cas d'inex$\acute{e}$cution des obligations de r$\acute{e}$sultat. En fait, la pr$\acute{e}$somption de causalit$\acute{e}$ dans le contentieux m$\acute{e}$dical pourra mener les m$\acute{e}$decins $\grave{a}$ se diriger vers les traitements d$\acute{e}$fensifs. Cette situation peut m$\hat{e}$me conduire $\grave{a}$ emp$\hat{e}$cher le d$\acute{e}$veloppement de la science m$\acute{e}$dicale, enfin $\grave{a}$ une situation d$\acute{e}$savantageuse aux patients. Il y a alors lieu de se m$\acute{e}$fier des int$\acute{e}$r$\hat{e}$ts d$\acute{e}$s$\acute{e}$quilibr$\acute{e}$s entre le m$\acute{e}$decin et le patient. De ce point de vue, on peut estimer que le droit français donne des suggestions aux juristes cor$\acute{e}$ens dans la recherche des solutions plus ad$\acute{e}$quates en ce qui concerne la charge de la preuve du lien causal en mati$\acute{e}$re de responsabilit$\acute{e}$ m$\acute{e}$dicale.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.2
• /
• pp.61-71
• /
• 2009

Most deciduous trees in temperate zone are dormant during the winter to overcome cold and dry environment. Dormancy of deciduous fruit trees is usually separated into a period of rest by physiological conditions and a period of quiescence by unfavorable environmental conditions. Inconsistent and fewer budburst in pear orchards has been reported recently in South Korea and Japan and the insufficient chilling due to warmer winters is suspected to play a role. An accurate prediction of the flowering time under the climate change scenarios may be critical to the planning of adaptation strategy for the pear industry in the future. However, existing methods for the prediction of budburst depend on the spring temperature, neglecting potential effects of warmer winters on the rest release and subsequent budburst. We adapted a dormancy clock model which uses daily temperature data to calculate the thermal time for simulating winter phenology of deciduous trees and tested the feasibility of this model in predicting budburst and flowering of Niitaka pear, one of the favorite cultivars in Korea. In order to derive the model parameter values suitable for Niitaka, the mean time for the rest release was estimated by observing budburst of field collected twigs in a controlled environment. The thermal time (in chill-days) was calculated and accumulated by a predefined temperature range from fall harvest until the chilling requirement (maximum accumulated chill-days in a negative number) is met. The chilling requirement is then offset by anti-chill days (in positive numbers) until the accumulated chill-days become null, which is assumed to be the budburst date. Calculations were repeated with arbitrary threshold temperatures from $4^{\circ}C$ to $10^{\circ}C$ (at an interval of 0.1), and a set of threshold temperature and chilling requirement was selected when the estimated budburst date coincides with the field observation. A heating requirement (in accumulation of anti-chill days since budburst) for flowering was also determined from an experiment based on historical observations. The dormancy clock model optimized with the selected parameter values was used to predict flowering of Niitaka pear grown in Suwon for the recent 9 years. The predicted dates for full bloom were within the range of the observed dates with 1.9 days of root mean square error.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.2
• /
• pp.72-78
• /
• 2009

The demand for rainfall data in gridded digital formats has increased in recent years due to the close linkage between hydrological models and decision support systems using the geographic information system. One of the most widely used tools for digital rainfall mapping is the PRISM (parameter-elevation regressions on independent slopes model) which uses point data (rain gauge stations), a digital elevation model (DEM), and other spatial datasets to generate repeatable estimates of monthly and annual precipitation. In the PRISM, rain gauge stations are assigned with weights that account for other climatically important factors besides elevation, and aspects and the topographic exposure are simulated by dividing the terrain into topographic facets. The size of facet or grid cell resolution is determined by the density of rain gauge stations and a $5{\times}5km$ grid cell is considered as the lowest limit under the situation in Korea. The PRISM algorithms using a 270m DEM for South Korea were implemented in a script language environment (Python) and relevant weights for each 270m grid cell were derived from the monthly data from 432 official rain gauge stations. Weighted monthly precipitation data from at least 5 nearby stations for each grid cell were regressed to the elevation and the selected linear regression equations with the 270m DEM were used to generate a digital precipitation map of South Korea at 270m resolution. Among 1.25 million grid cells, precipitation estimates at 166 cells, where the measurements were made by the Korea Water Corporation rain gauge network, were extracted and the monthly estimation errors were evaluated. An average of 10% reduction in the root mean square error (RMSE) was found for any months with more than 100mm monthly precipitation compared to the RMSE associated with the original 5km PRISM estimates. This modified PRISM may be used for rainfall mapping in rainy season (May to September) at much higher spatial resolution than the original PRISM without losing the data accuracy.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.1-33
• /
• 1997

The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.