• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.5-6
• /
• 2002

The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.

• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.64-72
• /
• 1976

A series of rooting experiments of P. radiata needle fascicles were carried out in test tubes using peat-pumice medium to see a possibility of rooting fascicles in test tubes and, if possible, to find out whether that method can improve the rooting. Typical rooting of clones from ortets aged 3, 7, 11. 18, and over 40, respectively, was 57%, 47%, 18%, 4%, and 2%. The effect of ortet ages upon rooting of fascicle cuttings was significantly exerted in these experiments. In the older ortets these results are not as good as those often obtained in a glasshouse. Hormones tested (indolebutyric acid and abscisic acid) had no significant effect on rooting and neither did a series of fungicides tested. Needle fascicles placed in an 18 hour day at $20^{\circ}/10^{\circ}C$ (day/night temperature) rooted signficantly better than those in a 10 hour day at the same temperature regime. The latter in turn rooted better than those set under a 10 hour day at $15^{\circ}/5^{\circ}C$. Clonal differences in rooting ability were also distinct in every trial of the present experiments with needle fascicles.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.1075-1078
• /
• 2015

Three kinds of typical practices to reflect the values of Agile Development Methodology were selected from a previous study. Those were Communicate using Web 2.0 collaboration tools, test-driven development (TDD, Test-Driven Development) method is adopted, and refactoring. In this study, we set up a hypothesis that the adoption of TDD project will make user satisfaction is higher. Select 100 sample projects from SourceForge(sourceforge.net), the most popular open source hosting site, the criteria is we can be determined whether operate in the project (developer least 7 people, bugs can occur more than 100, created the project since 2000). To determine whether the use of automated development tools xUnit of TDD through the CVS and SVN log analysis. Using data from the FLOSSmole and to evaluate the user experience of the project. User satisfaction of each project Rating, bug fix cycle, downloads and pageviews. Through this study, correlates of whether TDD adoption and user satisfaction, we will suggest a reflected the Agile practices new open source development methodology. As a result, it contributes to increase the maturity of the open source community.

• Convergence Security Journal
• /
• v.11 no.3
• /
• pp.67-74
• /
• 2011

One of the major requisites for the success of the smart-TV is to create a circumstance where smart-TV app's are produced and purchased on a large scale. However, the smart TV app's may succeed only under the condition that the user interface of the smart TV is greatly evolved from the typical TV remote controller. Several equipments have been devised to tackle the problem of the poor user interface of the smart-TV; however, they are not satisfactory in the aspects that they usually increase the costs of TV-set and they do not help practically the app developers. The equipments are pre formed so that it is hard for the app developers to design their own user interface using them. In the paper, sMartUX, a method for developing the smart-TV app is introduced. sMartUX provides a new paradigm and development environment for designing, implementing, and operating the user interface of the smart TV app using a smart-phone. With sMartUX, app developers can design their own user interface using the various facilities of a smart-phone, and they need not to care the details of various smart-phones and how to launch their user interface onto a smart-phone.

• Geomechanics and Engineering
• /
• v.9 no.5
• /
• pp.619-629
• /
• 2015

Influenced by various mining activities, fractures in rock masses have different densities, set numbers and lengths, which induce different mechanical properties and failure modes of rock masses. Therefore, precisely expressing the failure criterion of the fractured rock influenced by coal mining is significant for the support design, safety assessment and disaster prevention of underground mining engineering subjected to multiple mining activities. By adopting PFC2D particle flow simulation software, this study investigated the propagation and fractal evolution laws of the micro cracks occurring in two typical kinds of rocks under uniaxial compressive condition. Furthermore, it calculated compressive strengths of the rocks with different confining pressures and box-counting dimensions. Moreover, the quantitative relation between the box-counting dimension of the rocks and the empirical parameters m and s in Hoek-Brown strength criterion was established. Results showed that with the increase of the strain, the box-counting dimension of the rocks first increased slowly at the beginning and then exhibited an exponential increase approximately. In the case of small strains of same value, the box-counting dimensions of hard rocks were smaller than those of weak rocks, while the former increased rapidly and were larger than the latter under large strain. The results also presented that there was a negative correlation between the parameters m and s in Hoek-Brown strength criterion and the box-counting dimension of the rocks suffering from variable mining activities. In other words, as the box-counting dimensions increased, the parameters m and s decreased linearly, and their relationship could be described using first order polynomial function.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.499-508
• /
• 2005

The purpose of this study were to evaluate the effect on the reversion of sedation induced by midazolam with flumazenil and to determine the plasma concentration of flumazenil according to the method of administration. Intranasal and intravenous flumazenil were administered to sedated health volunteers aged from 23 to 25 years, in doses typical of those used clinically to induce sedation with midazolam and for reversal with flumazenil. Objective assessment for degree of sedation and vital signs, plasma concentration were made for 2 hours period. 1. Systolic and diastolic blood pressure, $SpO_2$ were not changed by adminstration of flumazenil in sedated subject with midazolam, but pulse rate was increased temporarily. 2. Flumazenil showed the reversal of the sedative effect induced by midazolam regardless of administration methods. But intravenous administration showed more effect on the degree and the duration of reversion than intranasal administration with the exception of on set time. 3. Peak plasma concentration of flumazenil administered by intranasal route reached after 2 min and that of flumazenil administered by intravenous route was 4 min. Thus uptake of flumazenil did not showed any difference in accordance with the adminstration route. 4. Administration of flumazenil resulted in the temporary increase of midazolam plasma concentration.

• Journal of Korea Water Resources Association
• /
• v.39 no.2 s.163
• /
• pp.161-178
• /
• 2006

Heathcote (1998) identified a systematic, seven-step approach to general watershed planning and management. It consists of 1) understanding watershed components and processes, 2) identifying and ranking problems to be solved, 3) setting clear and specific goals, 4) developing a list of management options, 5) eliminating infeasible options 6) testing the effectiveness of remaining feasible options, and 7) developing the final options. In this study the first five steps of that process were applied to the Anyangcheon watershed in Korea, which experiences streamflow depletion, frequent flood damages, and poor water quality typical of highly urbanized watersheds. This study employed four indices: Potential Flood Damage(PFD), Potential Streamflow Depletion(PSD), Potential Water Quality Deterioration(PWQD) and Watershed Evaluation Index(WEI) to identify and quantify problems within the watershed. WEI is the integration index of the others. Composite programming which is a method of multi-criteria decision making is applied for the calculation of PSD, PWQD and WEI (Step 2). The primary goal of the study is to secure instreamflow in the Anyangcheon during dry seasons. The second management goals of flood damage mitigation and water quality enhancement are also set (Step 3). Management options include not only structural measures that can alter the existing conditions, but also nonstructural measures that rely on changes in human behavior or management practices (Step 4). Certain management options which are not technically, economically, and environmentally feasible, are eliminated (Step S). Therefore, this study addresses a Pre-feasibility study, which established a master plan using Steps 1 through 5.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.2
• /
• pp.67-76
• /
• 2006

For a hydro power plant project, the headrace tunnel having a finished diameter of 3.3 m was constructed in volcanic rocks with well-developed vertical joint and high groundwater table. The intake facility was located 20.3km upstream of the powerhouse and headrace tunnel of 20km in length and penstock of 440m in height connected the intake and the powerhouse. The typical caldera lake, Lake Toba set the geology at the site the caving of the ground caused tension cracks in the vertical direction to be developed and initial stresses at the ground to be released. High groundwater table(the maximum head of 20bar) in the area of well-connected vertical joints delayed the progress of tunnel excavation severely due to the excessive inflow of groundwater. The excavation of tunnel was made using open-shield type TBM and mucking cars on the rail. High volume of water inflowraised the water level inside tunnel to 70cm, 17% of tunnel diameter (3.9m) and hindered the mucking of spoil under water. To improve the productivity, several adjustments such as modification of TBM and mucking cars and increase in the number of submersible pumps were made forthe excavation of severe water inflow zone. Since the ground condition encountered during excavation turned out to be much worse, it was decided to adopt PC segment lining instead of RC lining. Besides, depending on the conditions of the water inflow, rock mass condition and internal water pressure, one of the invert PC segment lining with in-situ RC lining, RC lining and steel lining was applied to meet the site specific condition. With the adoption of PC segment lining, modification of TBM and other improvement, the excavation of the tunnel under severe groundwater condition was successfully completed.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.13 no.2
• /
• pp.88-116
• /
• 2009

Background : EBM (the evidence based medicine) is the direction of the development for oriental medicine. The pulse meter-analyzer is the important part to standardize the pulse diagnosis. When we set up the direction of the study on the pulse meter-analyzer, the awereness about the pulse meter and analyzer of the clinical oriental medical doctors as consumers is very important. Objectives : In order to prepare for the mutual study and the export strategy on the pulse meter-analyzer of Korea and China, the attitude of the study and the grasp of the awereness about the pulse meter-analyzer of the Chinese medical doctors are very important. Methods : We developed the several items as the important factor of the development of the pulse meter and analyzer. They were translated by chinese medical doctor. The investigation for demend was conducted during 3 months in Guangzhou City, Guangdong Province, China. The results of the investigation was done the statistical method of frequency analysis, Chi-squared test, correspondence analysis. Results : The most important differentiation of symptom is the symptom of JANG-BU(臟腑). The method of the utility in the pulse diagnosis is Chon-Gu (寸口) pulse diagnosis and the research on Chon-Kwan-Cheok(寸關尺) is the most important measurement factor. And the typical the old pulse is the little-fine weak pulse. The pulse meter-analyzer is most suitable to the diagnosis of the hypertension and the arteriosclerosis. Conclusion : The development of the pulse analyzer including the requests of Korean and Chinese medical doctors is very important. Specially the researches on the influence factors of the traditional diagnosis and the environment of the measurement are important for developing the pulse analyze.

• Parasites, Hosts and Diseases
• /
• v.57 no.6
• /
• pp.671-680
• /
• 2019

Cathepsin D (CatD, EC 3.4.23.5) is a member belonging to the subfamily of aspartic endopeptidases, which are classified into the MEROPS clan AA, family A1. Helminth parasites express a large set of different peptidases that play pivotal roles in parasite biology and pathophysiology. However, CatD is less well known than the other classes of peptidases in terms of biochemical properties and biological functions. In this study, we identified 2 novel CatDs (CsCatD1 and CsCatD2) of Clonorchis sinensis and partially characterized their properties. Both CsCatDs represent typical enzymes sharing amino acid residues and motifs that are tightly conserved in the CatD superfamily of proteins. Both CsCatDs showed similar patterns of expression in different developmental stages of C. sinensis, but CsCatD2 was also expressed in metacercariae. CsCatD2 was mainly expressed in the intestines and eggs of C. sinensis. Sera obtained from rats experimentally infected with C. sinensis reacted with recombinant CsCatD2 beginning 2 weeks after infection and the antibody titers were gradually increased by maturation of the parasite. Structural analysis of CsCatD2 revealed a bilobed enzyme structure consisting of 2 antiparallel β-sheet domains packed against each other forming a homodimeric structure. These results suggested a plausible biological role of CsCatD2 in the nutrition and reproduction of parasite and its potential utility as a serodiagnostic antigen in clonorchiasis.