• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.656-657
• /
• 2008

The droplet dynamics in a hydrophilic/hydrophobic microchannel, which is applicable to a typical proton exchange membrane fuel cell (PEMFC), is studied numerically by solving the equations governing conservation of mass and momentum. The liquid-gas interface or droplet shape is determined by a level set method which is modified to treat contact angles. The matching conditions at the interface are accurately imposed by incorporating the ghost fluid approach based on a sharp-interface representation. The effects of contact angle, inlet flow velocity, droplet size and side wall on the droplet motion are investigated parametrically. Based on the numerical results, the droplet dynamics including the sliding and detachment of droplets is found to depend significantly on the contact angle. Also, a droplet removal process is demonstrated on the combination of hydrophilic and hydrophobic surfaces.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.113-118
• /
• 2011

Many kinds of dynamic absorbers have been used to reduce the vibration of machineries and structures. In the typical ones, however low damping capacity, durability and limited install condition restrict their application. In this study, high damped dynamic absorber was proposed for diesel generator set. Developed absorber is composed with mass and coil springs. Silicone oil was filled inside the narrow gap between mass and casing. Viscous damping of silicon oil act as additional damping so that proposed dynamic absorber is suitable for D/G set which have adjacent resonance frequency to operation speed. The performance of the dynamic absorber was confirmed through the actual test on diesel engine generator set.

• Current Optics and Photonics
• /
• 제1권2호
• /
• pp.113-117
• /
• 2017

With the increasing use of high-power laser diode bars (LDBs) and stacked LDBs, the issue of thermal control has become critical, as temperature is related to device efficiency and lifetime, as well as to beam quality. To improve the thermal resistance of an LDB set, we propose and analyze a bypass heat sink with a top canopy structure for an LDB set, instead of adopting a thick submount. The thermal bypassing in the top-canopy structure is efficient, as it avoids the cross-sectional thermal saturation that may exist in a thick submount. The efficient thickness range of the submount in a typical LDB set is guided by the thermal resistance as a function of thickness, and the simulated bypassing efficiency of a canopy is higher than a simple analytical prediction, especially for thinner canopies.

• 한국영어학회지:영어학
• /
• 제1권1호
• /
• pp.101-117
• /
• 2001

In English, whether or not wh-movement creates weak crossover effects depends upon the type of wh-phrases that cross over. A bare interrogative like who shows a typical weak crossover effect whereas which N type (e.g. which girl) and partitive type (e.g. which of these girls) wh-phrases would show mere weaker and weakest crossover effects, respectively. Previous approaches to English crossover phenomena that resort to a binary notion of specificity or D-linking cannot account for the three-way contrast the three different types of wh-phrases show. To overcome this problem, I argue in this paper that specificity should be a non-binary set-theoretic notion and propose the following subset principle and optimal binding relation: Between two lexical nominal expressions A and B, A is regarded as more specific than B iff the denotation of A comes from a more narrowly defined non-singleton set than B. Between two lexical nominal expressions A and B, if A locally binds B, then the non-singleton set from which the denotation of A comes should be a subset of the set from which the denotation of B comes (i.e. B cannot be more specific than A). The smaller the subset (i.e. the wider the specificity gap between binder and binder), the more optimal the local binding relation is. A locally binds B iff A is coindexed with B, and A c-commands B, and there is no such C that does not bind A but binds B. Finally, I show that partitivity functions to carve out a smaller subset and thus make partitive wh-phrases more specific than simple which N type wh-phrases.

• 대한전자공학회논문지SD
• /
• 제48권9호
• /
• pp.50-57
• /
• 2011

전형적인 버스 시스템 아키텍처는 마스터, 아비터, 디코더, 슬레이브와 같은 성분으로 구성되어 있다. 아비터는 여러 마스터가 동시에 버스를 사용하지 못하므로 선택된 버스중재 방식에 따라 버스를 중재하는 역할을 한다. 고성능을 위해 사용되는 일반적인 우선순위 방법에는 고정 우선순위, 라운드 로빈, TDMA, 로터리 방식 등이 있다. 일반적인 버스 중재 알고리즘은 버스 점유율을 고려하지 않고, 버스중재를 실시한다. 본 연구에서는 각각의 마스터 블록에서 버스 점유율을 계산한 버스 중재방식에 대해 제안하고 있다. TLM 성능분석 방식을 통해 제안하는 방식과 기존의 다른 버스 중재방식의 성능을 분석하였다. 성능검증 결과에서 일반적인 고정우선순위와 라운드로빈 방식은 버스점유율을 설정할 수 없었으며, TDMA와 로터리 중재방법은 100,000 cycle의 시뮬레이션에서 각각 50%와 70%의 버스점유율 오차가 발생하였다. 그러나, 제안하는 점유율 고려방식에서는 1,000cycle이상에서부터 99%이상 정확도를 보였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.510-515
• /
• 2007

A Study on Typical Rates of Water-use for School Facilities has been carried out in this work. Water supply system is given much weight in school facilities. Therefore, it set up a basis efficiency using of water sources to calculate typical rates of water use. The results are summarized as follows ; 1) On the whole, typical rates of water-use was founded out 15 L / stu. d in pirmary school, 10 L / stu. d in middle school and 30L / stu. d in high school smaller than the existing it. It was rate of water-use change as season and Max. Rates of water-use was July. 2) I deem that school hours are 5 hour's in primary school, 7 hour's in middle school and 8 hour's in high school. It the concept of 1 hour that is lesson time 40 minutes and resting time 10 minutes in primary school, lesson time 45 minutes and resting time 10 minutes in middle school and lesson time 50 minutes and resting time 10 minutes in high school. 3) It is desired that we calculate the volume of pump and water tank throughout this concept and the size of water tank should be 1.5 times with taking pick load into consideration by this study on typical rate of water-use. 4) The amount of using water increases in gradually and I consider the life cycle of facilities is more than 10 years. As a result, I can forecast that the size will be insufficiency but I deem that if we devise a plan about parallel pumping on water tank space, we can cope with it. Also, it is expected that we can cut back the transport energy by controlling pump volume.

• 조명전기설비학회논문지
• /
• 제22권4호
• /
• pp.100-106
• /
• 2008

일반 가정집 부하는 컴퓨터, 비디오, 냉장고, 마이크로웨이브 오븐, TV, 오디오 등의 많은 비선형 부하를 가지고 있다. 이들 비선형 부하는 고조파 전류를 발생시키고, 전력계통의 정현파 전압을 왜곡시킨다. 고조파 측정 결과로 고조파는 시간에 따라 변하는 특성이 관측되었다. 시간에 따라 변하는 고조파를 해결하기 위해서 쓰이는 가장 보편적인 방법은 누적확률을 사용하는 것이다. 본 논문에서는 가정집 부하의 고조파 현장 측정과 EDSA 프로그램을 사용한 고조파 시뮬레이션을 심도 있게 다루고자 하였다.

• 조명전기설비학회논문지
• /
• 제22권5호
• /
• pp.95-102
• /
• 2008

일반 가정집 부하는 컴퓨터, 비디오, 냉장고, 마이크로웨이브 오븐, TV, 오디오 등의 많은 비선형 부하를 가지고 있다. 이들 비선형 부하는 고조파 전류를 발생시키고, 전력계통의 정현파 전압을 왜곡시킨다. 고조파 측정 결과로 고조파는 시간에 따라 변하는 특성이 관측되었다. 시간에 따라 변하는 고조파를 해결하기 위해서 쓰이는 가장 보편적인 방법은 누적확률을 사용하는 것이다. 본 논문에서는 일년동안 일반 가정집 부하의 고조파 측정을 하고, 현존하는 가정집 부하의 고조파 수준과 미래의 고조파 영향을 예측하기 위한 목적의 조사를 심도 있게 다루고자 하였다.

• Structural Engineering and Mechanics
• /
• 제39권3호
• /
• pp.411-425
• /
• 2011

This paper illustrates the results of a seismic vulnerability study aimed to derive the fragility curves for typical Algerian reinforced concrete bridge piers using an analytical approach. Fragility curves express the probability of exceeding a certain damage state for a given ground motion intensity (e.g., PGA). In this respect, a set of 41 worldwide accelerometer records from which, 21 Algerian strong motion records are included, have been used in a non-linear dynamic response analyses to assess the damage indices expressed in terms of the bridge displacement ductility, the ultimate ductility, the cyclic loading factor and the cumulative energy ductility. Combining the damage indices defined for 5 damage rank with the ground motion indices, the fragility curves for the bridge piers were derived assuming a lognormal distribution.

• Journal of International Society for Simulation Surgery
• /
• 제2권2호
• /
• pp.64-66
• /
• 2015

Purpose : In this paper we proposed cascade feature filter and projection method for rapid human face recognition for the large-scale high-dimensional face database. Materials and Methods : The relevant features are selected from the large feature set using Fast Correlation-Based Filter method. After feature selection, project them into discriminant using Principal Component Analysis or Linear Discriminant Analysis. Their cascade method reduces the time-complexity without significant degradation of the performance. Results : In our experiments, the ORL database and the extended Yale face database b were used for evaluation. On the ORL database, the processing time was approximately 30-times faster than typical approach with recognition rate 94.22% and on the extended Yale face database b, the processing time was approximately 300-times faster than typical approach with recognition rate 98.74 %. Conclusion : The recognition rate and time-complexity of the proposed method is suitable for real-time face recognition system on the large-scale high-dimensional face database.