• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.286-286
• /
• 2010

In this paper, we proposed that optimum installation methods and characteristics of the hybrid type flame-sensor. The hybrid type flame-sensor has the high responsive performance. This research introduced the characteristics of the hybrid type flame-sensor, it was consist of IR/UV flame detector and proposed the optimum installation methods of false alarm reduced to resemble fire.

• 한국도로학회논문집
• /
• 제14권6호
• /
• pp.111-120
• /
• 2012

PURPOSES : This study is to suggest suitable lighting facility installation plans by finding out driver's preference for combination of lighting facility installation among landscape factors that affect driver visibility in tunnels. METHODS : SD method is used to extract emotional factors that affect drivers' preference, Components of tunnel lighting facility installation are evaluated through conjoint analysis and it suggested relative importance of attributes and utility values. RESULTS : In the aspects of satisfaction levels of components of tunnel lighting facility installation, Tunnel side, two lows, and solid line arrangement type has the highest level of satisfaction. Extract emotional factors that affect drivers' preference are "safety", "openness" and "amenity." In addition, the result of analyzing relative importance of attributes of tunnel lighting facility shows that numbers of lighting array has the highest importance and lighting facility arrangement has the lowest importance. Result of analyzing partial utility shows that the 2 low type among number of lows, the solid line arrangement type between arrangement types, placing in the middle part among lighting facility arrangement were highly preferred. CONCLUSIONS : In the case of lighting numbers, utility values of the first line and the second line showed us a big difference. Increasing the number arrays in the future reformation of lighting facility installation combination will be effective in enhancing the utility of the driver.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1999년도 학술대회논문집-국제 전기방전 및 플라즈마 심포지엄 Proceedings of 1999 KIIEE Annual Conference-International Symposium of Electrical Discharge and Plasma
• /
• pp.153-156
• /
• 1999

In this paper, a plate type ozonizer has been designed and manufactured to minimize the size of ozonizer. This ozonizer have following benefits : \circled1 convenience of shift and installation \circled2 maximize space utility. Therefore, ozone generation characteristics have been investigated by varying flow rate, supplied voltage and gap spacing of plate electrodes.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.205-208
• /
• 2000

In this paper, a plate type ozonizer has been designed and manufactured to minimize the size of ozonizer. This ozonizer have following benefits: convenience of shift and installation maximize space utility. Therefore, ozone generation characteristics have been investigated by varying flow rate, supplied power and gap spacing of plate electrodes.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1993년도 추계학술발표회논문집
• /
• pp.71-75
• /
• 1993

The Modeling analysis and design of a high frequency LC-type series and LLCC-type parallel resonant converter oprating in the continous conduction is presented. The state-plane diagram representation of the converter response gives and good insight into the converter operation. A set of characterisric frequency are plotted which design parameters can be obtained.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.227-228
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.177-178
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.405-406
• /
• 2011

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.925-927
• /
• 1992

Since that the portion of failures caused by mis-installation of accessories is about 50% of whole failures in power transmission lines, the necessity of assembly type joint boxes, which have excellent installation capability and which can be electrically tested before installation, is gradually increasing. In this paper, we presented the results from the study from the point of design and the results of experiments using models. With the results of study, we could make it clear that the possibility of practical use of assembly type joint boxes instead of conventional molding type joint boxes is very high.

• 한국지반신소재학회논문집
• /
• 제5권4호
• /
• pp.43-47
• /
• 2006

다짐조건을 달리하여 3가지 종류 지오그리드의 내시공성을 측정하였다. 이 실험은 ENV ISO 10722-1에 근거하여 실행되었다. 채움재와 관계없이 다짐횟수가 증가할수록 지오그리드의 인장강도는 감소하였으며, 지오그리드 종류에 따라 감소되는 경향이 다르게 나타남을 알 수 있었다. Woven 및 warp-knitted type 지오그리드의 경우 접합형 지오그리드에 비해 더 큰 감소경향을 나타내었다.