• 한국전기전자재료학회논문지
• /
• 제21권3호
• /
• pp.272-278
• /
• 2008

This paper investigated the a-si:H gate driver with the stepwise gate signal. In 1-chip type mobile LCD application the stepwise gate signal for low power consumption can be used by adding simple switching circuit. The power consumption of the a-Si:H gate driver can be decreased by employing the stepwise gate signal in the conventional circuit. In conventional one, the effect of stepwise gate signal can decrease slew rate and increase the fluctuation of gate-off state voltage, In order to increase the slew rate and decrease the gate off state fluctuation, we proposed a new a-Si:H TFT gate driver circuit. The simulation data of the new circuit show that the slew rate and the gate-off state fluctuation are improved, so the circuit can work reliably.

• 대한안전경영과학회지
• /
• 제11권3호
• /
• pp.87-94
• /
• 2009

Today's driver information system often features a rotary control type as a main controller for menu navigation. Population stereotype should be clearly understood in designing those systems to minimize the misunderstanding by the operator. This paper investigates stereotypes for rotary controlled menu interfaces and influences of contributing principles. A human factors experiment was conducted using various configurations of control-display layouts, cursor shapes/positions, and movement directions. The results showed that the control should be on the left of the display, with a rightward icon on the right side of the cursor, in order to match the stereotype. Regression analysis indicated that Warrick's principle was the most influential principle, followed by Icon shape, Icon position, Clockwise away, and Clockwise up principles. This study provides valuable information to designers of menu-based systems such as driver information systems and main control rooms that uses rotary controls.

• Safety and Health at Work
• /
• 제7권1호
• /
• pp.38-42
• /
• 2016

Background: Truck driving is known as one of the occupations with the highest accident rate. This study investigates the characteristics of traffic collisions according to road types (expressway and rural road). Methods: Classifying 267 accidents into expressway and rural road, we analyzed them based on driver characteristics (age, working experience, size of employment), time characteristics (day of accident, time, weather), and accident characteristics (accident causes, accident locations, accident types, driving conditions). Results: When we compared the accidents by road conditions, no differences were found between the driver characteristics. However, from the accident characteristics, the injured person distributions were different by the road conditions. In particular, driving while drowsy is shown to be highly related with the accident characteristics. Conclusion: This study can be used as a guideline and a base line to develop a plan of action to prevent traffic accidents. It can also help to prepare formal regulations about a truck driver's vehicle maintenance and driving attitude for a precaution on road accidents.

• 한국컴퓨터정보학회논문지
• /
• 제20권12호
• /
• pp.37-44
• /
• 2015

In this paper, we propose the assistance method to enable safe driving through analysis of dangerous driving behavior using real-time alarm by vehicle speed, azimuth data and smartphone. For this method, smartphone is receiving driving data from digital tachograph using communication. Safe driving habit is a very important issue to commercial vehicle because that driver's long time driving than other vehicle type driver. Existing methods are very inefficient to improve immediately dangerous driving habits during driving because proceed driving behavior analysis after the vehicle operation. We propose the new safe driving assistance method that can prevent traffic accidents by real-time and improve the driver's wrong driving habits through real-time dangerous driving behavior analysis and notification the result to the driver. We have confirmed that the method in this paper will help to improve driving habits and can be applied through the proposed method implementation and simulation experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 추계학술대회 논문집
• /
• pp.286-290
• /
• 2001

This paper presents a full-digital low-level controller for a robotic material transfer system which has been developed for a computer-integrated manufacturing model plant. Compared to conventional analog or hybrid type controllers in current industrial environments, this controller system has some advantages such as strong noise-immunity, easy control algorithm implementation, etc The servo-controller consists of two modules, a position controller and a DC servo motor driver. The position controller operates position feedback routines by receiving position encoder data and sending control outputs to the driver. The position controller is implemented in a full-digital way using a recently introduced microcontroller. The DC servomotor driver controls speeds and torques. The driver consists of a micro-controller and insulated-gate-bipolar-transistors (IGBT). The micro-controller provides control signals, and the IGBT's amplifies the control signals and sends them to the motor.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.865-871
• /
• 2011

This paper presents expansible driver manager that is easy to upgrade each surveillance device linkage in synthetic circumstantial judgement system. Unlike conventional surveillance systems that use fixed surveillance device and provide finite sensing data, a proposed system extends devices that not only existing but also newly develop, additional. This driver manager collects datas of standardized type from a driver of new device that developed based on common interface through configuration. And then, that transmits datas gathered to synthetic circumstantial judgement part according defined tags.

• 한국농촌건축학회논문집
• /
• 제18권4호
• /
• pp.9-16
• /
• 2016

Since 2000, family tour has increased a lot by effect of five-day workweek in South Korea. So, it became much needed road station. however road station's facilities are lacking. Recently, there is a growing emphasis on rural regional activation. So the government is concentrating in rural policy. In Japan case study, Road Station(RS, Michinoeki) make regional activation by Road station service. Rs is rest area for motor driver in rural area. In general, it is construct at rural roads, not a highway. In this paper, we hope to take a lesson from the RS case study. 2015, 2016, in japan, we visited to 7 case study and interviewed to a staff. As a result, In Japan's Rs was offering convenient services to motor driver and raising farmers's profits by selling local produce. The aim of that this paper is to suggest to Korean Type's Rs. There are five results from this paper as follows : First, Japan Rs, it works well to improve in regional activation in rural area. Two, Also Rs has to community facilities attached to the culture, welfare, library etc. Three, 5 Korean Type Rs can sort out. There are Community type, Joint tourism type, 6th industrialization type, Urban-Rural Interchange type, Shopping center type. This RS is introduced to Korea hopes to contribute to the regional activation in rural area.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.219-222
• /
• 2002

There are screw, reciprocating type turbo compressor by structure in an air compressor which is essential equipment on the industrial spot. Recently, the application range of a turbo compressor tend to be wide gradually. And this type of compressor needs high speed rotation of impeller in structure so high ratio gearbox and conventional induction motor driving required. This mechanical system have results of increased moment of inertia and mechanical friction loss. Recent studies of modern turbo compressor have been applied to developing super high speed BLDC motor and driver which remove gearbox that make its size small and mechanical friction loss minimum. To accomodate this tendency, we tried to develope a super high speed motor drive system for 150Hp, 70,000rpm direct drive Turbo compressor using DSP(Digital Signal Processor) and SVPWM(Space Vector Modulation PWM) technique. The results of this specific application show that super high speed driver and controller could be implemented well with digital electronics.

• 한국정밀공학회지
• /
• 제20권4호
• /
• pp.76-83
• /
• 2003

To cope with stringent performance targets requested in many fields spanning the whole range of industry, the driver is necessary to realize large dynamic range as well as nano resolution, manipulate the mover orientation without additional driver, and be suitable for clean environment. As one of those purposes, authors have developed the planar precision stages with the integrated operating principle of levitation and propel. In this paper, we discuss potential of magnetic suspension technology by comparing various features of non-contact planar stages, that is, repulsive type of surface actuator and attractive type of surface actuator.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1085-1088
• /
• 2007

A new DC-DC converter was designed for gate driver circuit using low temperature poly-Si TFT technology. To achieve high efficiency and small area, we proposed a cross-coupled type DC-DC converter which converts 5V of input voltage to 9V of output voltage and supplies 120$\mu$A of current to load. Its efficiency is 92.9% and the area is reduced as much as 19% compared to the previously reported latch type DC-DC converter.