• 대한방사선기술학회지:방사선기술과학
• /
• 제40권1호
• /
• pp.63-70
• /
• 2017

본 연구는 세기변조방사선 치료기술을 이용한 성문암 환자에게 사용되는 두 가지 상이한 열가소성 고정기구 마스크로 인한 환자위치잡이 오차를 비교 평가하고 자 하였다. 치료가 종료된 총 16명의 성문암 환자를 두 그룹으로 나누었고(기존마스크 vs. 변형마스크), 평균, 3D오차, 시스템과 랜덤오차를 구하여 환자위치잡이 오차를 비교하였다. 또한, 치료계획종양체적(PTV)에 대한 여백(margin)을 분석하였다. 3D오차에 대하여 기존 그룹은 $5.2{\pm}1.3mm$고, 변형그룹은 $5.9{\pm}0.7mm$로써, 변형마스크가 변형보다 13.6% 높았다. 시스템오차는 기존그룹(변형그룹)에서 좌표 x, y, z방향은 각각 1.7 mm (1.1 mm), 1.0 mm (1.8 mm), 1.5 mm (2.0 mm)였고, 회전각(roll angle)은 $0.8^{\circ}$ ($0.8^{\circ}$)였다. 랜덤오차는 변형그룹이 기존그룹에 비하여 좌표 x, y, z방향으로 10.9%, 1.7%, 23.1%로 낮았으나, 회전각은 12.4% 높았다. PTV여백에서 변형그룹은 좌표 x방향에 대하여 기존그룹에 비하여 31.8% 낮았으나, 반대로 좌표 y와 z방향에서는 기존그룹보다 각각 52.6%와 21.6%로 높았다. 성문암 세기변조방사선치료에서 변형된 마스크 사용은 고정기구의 변형으로 인한 환자위치잡이 오차는 수치적으로는 영향을 줄 수 있지만, 다양한 관점에서 고정기구 마스크에 대한 연구가 임상적인 측면에서 연구가 필요할 것으로 사료된다.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.151-159
• /
• 2015

In this study, we developed an automated contact-type thickness measurement machine that continuously and precisely measures the thickness of a PCB module product using multi-LVDT sensors. The system contains a measurement part to automatically measure the thickness in real time according to the set conditions with an alignment supply unit and unloading unit to separate OK and NG products. The sensors were calibrated before assembly in the measuring machine, and precision and accuracy performance tests were also performed to reduce uncertainty errors in the measurement machine. In the calibration test, the precision errors of the LVDT sensor were determined to be $1-3{\mu}m$ as 0.1% at the measuring range. A measurement error of 0.8 mm and 1.0 mm thickness test standards were found to be $1{\mu}m$ and $4{\mu}m$, and the standard deviations of two 1.0 mm products were measured as $14{\mu}m$ and $8{\mu}m$, respectively. In the measurement system analysis, the accuracies of test PCB standards were found to be $2{\mu}m$ and $3{\mu}m$, respectively. From the results of gage repeatability and reproducibility (R & R) crossed, we found that the machine is suitable for the measurement and process control in the mass production line as 7.92% of total gage R & R and in seven distinct categories. The maximum operating speed was limited at 13 pcs/min, showing a value good enough to measure.

• Journal of the Korean Data and Information Science Society
• /
• 제25권2호
• /
• pp.423-429
• /
• 2014

본 논문은 이원고정효과모형의 분산분석에서 오차의 독립성과 등분산성이 만족되지 않는 경우를 가정하고 있다. 자료분석을 위한 모수추정방법으로 가중최소제곱법을 가정하고 있으며 모수를 추정하기 위한 방법으로 모형의 순차적 적합방식을 이용하고 있다. 또한, 모형의 행렬표현식으로부터 벡터공간에서의 사영을 이용하여 자료를 분석하는 방법을 제시하고 있다. 모형의 순차적 적합에 해당하는 제1종 제곱합을 구하기 위하여 모형행렬에 의한 부분공간으로의 사영을 다루고 있다. 이 경우에 사영에 의한 제곱합을 사영제곱합으로 취급한다.

• 한국레이저가공학회지
• /
• 제12권1호
• /
• pp.19-24
• /
• 2009

Because of its fast and precise welding performance, laser welding is becoming a new excellent welding method. However, the precise focusing and robust seam tracking are required to apply laser welding to the practical fields. In order to laser weld a type of T joint like a circular pipe on a square pipe, which could be met in the three dimensional structure such as an aluminum space frame, a visual sensor system was developed for automation of focusing and seam tracking. The developed sensor system consists of a digital CCD camera, a structured laser, and a vision processor. It is moved and positioned by a 2-axis motorized stage, which is attached to a 6 axis robot manipulator with a laser welding head. After stripe-type structured laser illuminates a target surface, images are captured through the digital CCD camera. From the image, seam error and defocusing error are calculated using image processing algorithms which includes efficient techniques handling continuously changed image patterns. These errors are corrected by the stage off-line during welding or teaching. Laser welding of a circular pipe on a square pipe was successful with the vision tracking system by reducing the path positioning and de focusing errors due to the robot teaching or a geometrical variation of specimens and jig holding.

• 한국학교보건학회지
• /
• 제1권1호
• /
• pp.103-113
• /
• 1988

The analysis of the visual impairment and refractive errors among 4,004 school children in Seoul in 1986 with ancilliary questionnaire on various socio-environmental and visual factors was conducted. The number of the student with subnormal vision (0.7 or less) was 1,552 (38,8 %), and the rate of subnormal vision was increased with the higher grading of the school classes. Rate of myopes among the 1,552 students vision 0.7 or less consists of 52 % in primary school, 83.5 % in middle school, and 94 % in high school, and they were increased with the higher grading of the school class. The acutest increase of rates were observed at the stages of 2nd year class of male, and 1st year class of female at the middle school. Among the glasses-wearer of myopic students of vision 0.5 or less, the rate of adequately corrected cases was 42.5 %, whereas the overcorrected in 6.8 %, and undercorrected in 49.3 %. The main reasons of glasses negligence among the non-possessor of glasses with the vision of 0.5 or less were indicated in prominence of numbers of' "no complaints without glasses" (42 %). "unawareness of visual disturbance" (20%), "annoyance with wearing glasses" (13.4%), and "no permission from parents" (11.5 %) rather than the "economical reasons". The amblyopic components were estimated 126 cases (3.2%) in combination of refractive errors. According to the analysis of ancilliary questionnaire, the-conclusion with the statistical significance was that the myopization of the children's eyes appeared susceptible with a number of socio-environmental factors including the eating habits, length of T.V. watching period and distance, reading distance and type of illumination during near work, and school achievement. The possibility of prevention in some extents of progress of the myopia following the improvement of the relevant environmental factors in younger stage of children would be considered as deducible one.

• 한국안전학회지
• /
• 제28권1호
• /
• pp.24-28
• /
• 2013

This article evaluates the accuracy of noise measurements for 37 noise measurement applications for iPhone 4 and iPhone 3Gs. Noise levels were measured using simultaneously a precision sound level meter and iPhones installed noise measurement applications at the levels of 70 dB, 80 dB and 90 dB at 1,000 Hz. Measurement errors were estimated by subtracting two measurements between iPhone and sound level meter. It was found that measurement errors of 34 applications(89.2%) were greater than ${\pm}2$ dB which is the maximum allowable error range for the Type II sound level meter. It was only 4 applications that measurement errors lie within ${\pm}2$ dB error range. There was no significant differences among measurements with four iPhone 4s. However, there were significant differences between the measurements with iPhone 4 and iPhone 3Gs using the same application. It was due to the different hardware specifications such as microphone. Therefore, noise measurement applications, for example, which has to utilize hardware of the smartphone, should be programmed to identify hardware specifications and to adopt appropriate correction factors upon hardware specifications. In conclusion, it is necessary to check accuracy and validity before using the noise measurement applications for iPhones. Also, it was suggested that it should develop an evaluation guideline or protocol on accuracy testing for the measurement applications using a smartphone.

• Journal of Electrical Engineering and Technology
• /
• 제7권4호
• /
• pp.558-563
• /
• 2012

In this paper, a novel planar type magnetic levitation system without other assistant devices is proposed and it can move with 6 degree of freedom (X, Y, Z, ${\theta}_X$, ${\theta}_Y$, ${\theta}_Z$) in wafer size as well as in nano scale positioning.The mover is composed with 2-D Halbach permanent magnet array and the stator is composed with $10{\times}10$ coil arrays.It was composed in laboratory and tested with short stroke (4 [mm]) and long stroke (160 [mm])movements. The errors of short movement test is [X, Y, Z, ${\theta}_X$, ${\theta}_Y$, ${\theta}_Z$]${\leq}$ [${\pm}200nm$, ${\pm}200nm$, ${\pm}250nm$, ${\pm}3urad$, ${\pm}2urad$, ${\pm}1urad$]The errors of long stroke movement test is [X, Y, Z, ${\theta}_X$, ${\theta}_Y$, ${\theta}_Z$]${\leq}$ [${\pm}200nm$, ${\pm}200nm$, ${\pm}250nm$, ${\pm}1.5urad$, ${\pm}2urad$, ${\pm}0.5urad$].

• 한국간담췌외과학회지
• /
• 제28권2호
• /
• pp.115-124
• /
• 2024

To compare the outcomes of low central venous pressure (CVP) to standard CVP during laparoscopic liver resection. The study design was a systematic review following the PRISMA statement standards. The available literature was searched to identify all studies comparing low CVP with standard CVP in patients undergoing laparoscopic liver resection. The outcomes included intraoperative blood loss (primary outcome), need for blood transfusion, mean arterial pressure, operative time, Pringle time, and total complications. Random-effects modelling was applied for analyses. Type I and type II errors were assessed by trial sequential analysis (TSA). A total of 8 studies including 682 patients were included (low CVP group, 342; standard CVP group, 340). Low CVP reduced intraoperative blood loss during laparoscopic liver resection (mean difference [MD], -193.49 mL; 95% confidence interval [CI], -339.86 to -47.12; p = 0.01). However, low CVP did not have any effect on blood transfusion requirement (odds ratio [OR], 0.54; 95% CI, 0.28-1.03; p = 0.06), mean arterial pressure (MD, -1.55 mm Hg; 95% CI, -3.85-0.75; p = 0.19), Pringle time (MD, -0.99 minutes; 95% CI, -5.82-3.84; p = 0.69), operative time (MD, -16.38 minutes; 95% CI, -36.68-3.39; p = 0.11), or total complications (OR, 1.92; 95% CI, 0.97-3.80; p = 0.06). TSA suggested that the meta-analysis for the primary outcome was not subject to type I or II errors. Low CVP may reduce intraoperative blood loss during laparoscopic liver resection (moderate certainty); however, this may not translate into shorter operative time, shorter Pringle time, or less need for blood transfusion. Randomized controlled trials with larger sample sizes will provide more robust evidence.

• 한국도로학회논문집
• /
• 제18권3호
• /
• pp.109-114
• /
• 2016

PURPOSES : The demand for extending national highways is increasing, but traffic monitoring is hindered because of resource limitations. Hence, this study classified highway segments into 5 types to improve the efficiency of short-term traffic count planning. METHODS : The traffic volume trends of 880 highway segments were classified through R-squared and linear regression analyses; the steadiness of traffic volume trends was evaluated through coefficient of variance (COV), and the normality of the data were determined through the Shapiro-Wilk W-test. RESULTS : Of the 880 segments, 574 segments had relatively low COV and were classified as type 1 segments, and 123 and 64 segments with increasing and decreasing traffic volume trends were classified as type 2 and type 3 segments, respectively; 80 segments that failed the normality test were classified as type 4, and the remaining 39 were classified as type 5 segments. CONCLUSIONS : A theoretical basis for biennial count planning was established. Biennial count is recommended for types 1~4 because their mean absolute percentage errors (MAPEs) are approximately 10%. For type 5 (MAPE =19.26%), the conventional annual count can be continued. The results of this analysis can reduce the traffic monitoring budget.

• 한국측량학회지
• /
• 제9권1호
• /
• pp.75-82
• /
• 1991

본 연구는 자체검정 번들조정법에서 과대오차를 처리하기 위한 최적의 Robust 추정법과 축척추정량(S.E)를 조사하는데 목적을 두고 있다. 과대오차의 검출에 있어서 여러가지 경중률을 적용하기 위하여 5가지 Robust 추정법과 3가지 축척추정량을 사용하였으며, 2가지 기준점배치형태(고밀도, 저밀도)와 3가지 과대오차(4$\sigma o$. 20$\sigma o$. 50$\sigma o$)는 비교분석을 위해 이용되었다. 그 결과, Robust 추정법중 Anscombe 추정법이 가장 좋은 정확도를 보여 주고 있으며, 기준점 배치형태에 따른 축척추정량의 적용을 분석한 결과 기준점 배치밀도가 높은 경우는 Type II 축척추정량이, 기준점 배치밀도가 낮은 경우는 Type III 축척추정량이 안정되고 정확한 결과값을 나타내었다. 따라서 정밀한 구조물 해석에 있어서 과대오차의 영향을 제거하고 정확도를 향상시킬 수 있는 최적 축척추정량을 이용한 Robust 번들조정법의 활용이 기대된다.