• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.9
• /
• pp.1244-1249
• /
• 1995

Wavelet transform technique is applied to two important electromagnetic problems:1) to analyze the frequency-domain radar echo from finite-size targets and 2) to the integral solution of two- dimensional electromagnetic scattering problems. Since the frequency- domain radar echo consists of both small-scale natural resonances and large-scale scattering center information, the multiresolution property of the wavelet transform is well suited for analyzing such ulti-scale signals. Wavelet analysis examples of backscattered data from an open- ended waveguide cavity are presented. The different scattering mechanisms are clearly resolved in the wavelet-domain representation. In the wavelet transform domain, the moment method impedance matrix becomes sparse and sparse matrix algorithms can be utilized to solve the resulting matrix equationl. Using the fast wavelet transform in conjunction with the conjugate gradient method, we present the time performance for the solution of a dihedral corner reflector. The total computational time is found to be reduced.

• The Korean Journal of Applied Statistics
• /
• v.25 no.6
• /
• pp.897-915
• /
• 2012

This paper examines the relationship between the stock and futures markets in terms of lead-lag relationship, correlation and the hedge ratio using wavelet analysis. The basic finding is that the relationship between the two markets significantly depends on the time-scale. First, there is a feedback relationship between the stock and futures markets in the long-run scale; however, weaker evidence is observed in shorter-run scales. Second, wavelet correlation between the two markets increases for a longer time scale. Third, the hedge ratio and the effectiveness of hedging strategies increase as the investment horizon gets longer. The results in this paper indicate that the stock and futures series are perfectly correlated in the long run and are tied together over long horizons.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.412-422
• /
• 1999

Scale defects generated on the strip surface in a tandem finishing mill line are collected from the strip trapped among the production mills by freezing the growing scale on the strip by the melt glass coating and shutting down the line simultaneously. The samples observed of its cross sectional figure showed the process of scale defect formation where the defects are formed at the base metal surface by thicker oxidized scale during each rolling passes. The properties of the oxidized layer growth both at rolling and inter-rolling are detected down sized rolling test simulating carefully the rolling condition of the production line. The thickness of the oxidized layer at each rolling pass are simulated numerically. The critical scale thickness to avoid the defect formation is determined through the expression of mutual relation between oxidized layer thickness and the lanks of the strip called quality for the scale defects. The scale growth of scale less than the critical thickness and also to keep the bulk temperature tuning the water flow rate and cooling time appropriately. Two units of Inerstand Cooler are designed and settled among the first three stands in the production line. Two units of scale defect is counted from the recoiled strip and the results showed distinct decrease of the defects comparing to the conventionaly rolled products.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.6
• /
• pp.589-601
• /
• 2016

The hybrid grid was adopted and numerical prediction analysis of propeller unsteady bearing force considering free surface was performed for mode and full-scale KCS hull-propeller-rudder system by employing RANS method and VOF model. In order to obtain the propeller velocity under self-propulsion point, firstly, the numerical simulation for self-propulsion test of full-scale ship is carried out. The results show that the scale effect of velocity at self-propulsion point and wake fraction is obvious. Then, the transient two-phase flow calculations are performed for model and full-scale KCS hull-propeller-rudder systems. According to the monitoring data, it is found that the propeller unsteady bearing force is fluctuating periodically over time and full-scale propeller's time-average value is smaller than model-scale's. The frequency spectrum curves are also provided after fast Fourier transform. By analyzing the frequency spectrum data, it is easy to summarize that each component of the propeller bearing force have the same fluctuation frequency and the peak in BFP is maximum. What's more, each component of full-scale bearing force's fluctuation value is bigger than model-scale's except the bending moment coefficient about the Y-axis.

• The Korean Journal of Emergency Medical Services
• /
• v.22 no.3
• /
• pp.35-45
• /
• 2018

Purpose: The purpose of this study was to compare laryngoscopic views and ease of use and success of intubation, via the percentage of glottic opening (POGO) scale when using the Miller blade and Macintosh blade in paraglossal approach. Methods: Forty intern doctors were randomized for laryngoscopy to be performed in a crossover manner. They performed endotracheal intubation with Miller blade and Macintosh blade in two airway scenarios: normal airway and difficult airway with edema. We observed the rate of successful intubation, time required for visualizing the glottis, time to complete endotracheal intubation, ease of intubation, and the POGO scale. Results: In the normal airway, there was no difference in intubation between the two endoscopes. In the difficult airway, the time for visualizing the glottis (7.80 versus 10.24 sec; p=.006), the time to tube passage (19.38 versus 23.03 sec; p=.038) and the time to complete endotracheal intubation (21.84 versus 28.54 sec; p=.022) with Miller blade was shorter than with Macintosh blade. The POGO scale(%) of the Miller blade was higher than that of the Macintosh blade's (62.25 versus 56.32; p=.030). Conclusion: Compared to the Macintosh blade, Miller blade provided better visualization of the glottis and POGO scale, and faster time to completion of endotracheal intubation.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.7
• /
• pp.427-434
• /
• 2012

The overlap-add technique based on waveform similarity (WSOLA) method is known to be an efficient high-quality algorithm for time scaling of speech signal. The computational load of WSOLA is concentrated on the repeated normalized cross-correlation (NCC) calculation to evaluate the similarity between two signal waveforms. To reduce the computational complexity of WSOLA, this paper proposes a fast NCC computation method, in which NCC is obtained through pre-calculated sum tables to eliminate redundancy of repeated NCC calculations in the adjacent regions. While the denominator part of NCC has much redundancy irrespective of the time-scale factor, the numerator part of NCC has less redundancy and the amount of redundancy is dependent on both the time-scale factor and optimal shift value, thereby requiring more sophisticated algorithm for fast computation. The simulation results show that the proposed method reduces about 40%, 47% and 52% of the WSOLA execution time for the time-scale compression, 2 and 3 times time-scale expansions, respectively, while maintaining exactly the same speech quality of the conventional WSOLA.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.5
• /
• pp.501-507
• /
• 2007

This paper presents a new algorithm for the closed-loop $H_{\infty}$ control of a class of singularly perturbed nonlinear systems with an exogenous disturbance, using the successive Galerkin approximation (SGA). The singularly perturbed nonlinear system is decomposed into two subsystems of a slow-time scale and a fast-time scale in the spirit of the general theory of singular perturbation. Two $H_{\infty}$ control laws are obtained to each subsystem by using the SGA method. The composite control law that consists of two $H_{\infty}$ control laws of each subsystem is designed. One of the purposes of this paper is to design the closed-loop $H_{\infty}$ composite control law for the singularly perturbed nonlinear systems via the SGA method. The other is to reduce the computational complexity when the SGA method is applied to the high order systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.566-570
• /
• 1986

본 논문의 목적은 대규모 선형 시불변 계통에 대한 합성 제어기의 설계에 관한 새로운 방법을 제시하기 위한 것이다. 주어진 계통을 행렬 부호 함수를 이용하여 그 고유치의 크기에 따라 블럭 대각 분해하고 각부 계통에 대한 최적 제어기 및 전체계통에 대한 준최적 합성 제어기를 설계한다. 이 방법은 주어진 계통의 고유치를 미리 알 필요가 없으며 계통의 블력 분해 과정에서 Riccati 방정식및 Lyapunov 방정식의 해를 구할 필요가 없고 특이섭등 기법이나 Two time scale seperation 방법에서의 제약조건에 관계없이 광범위하게 적용되는 장점이 있다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.181-182
• /
• 2010

For real-time displacement monitoring of large-scale structures, the high-rate (>1 Hz) GPS data processing is necessary, which is not possible even for the scientific GPS data processing softwares. Since the baseline is generally very short in this case, most of the atmospheric effects are removed, resulting in the unknowns of position and integer ambiguity. The number of unknowns in real-time kinematic GPS positioning makes the positioning impossible with usual approach, thus two-step approach is tested in this study.

• The Bulletin of The Korean Astronomical Society
• /
• v.22
• /
• pp.14.2-15
• /
• 1997