• Journal of Korea Water Resources Association
• /
• v.53 no.1
• /
• pp.1-13
• /
• 2020

The most common approach for computing engineering flow problems at high Reynolds number is still the Reynolds-averaged Navier-Stokes (RANS) computations based on turbulence models with wall functions. The recently developed generalized wall functions blending between the wall-limiting viscous and the outer logarithmic relations ensure a smooth transition of flow quantities across two regions. The performances and convergence properties of widely used turbulence models with wall functions that are applicable for turbulence kinetic energy (TKE), turbulent and specific dissipation rates, and eddy viscosity are presented through a series of near wall flow simulations. The present results show that RNG k-𝜖 model should be carefully applied with small tolerance to get the stable solution when the first grid lies in the buffer layer. The standard k-𝜖 and RNG k-𝜖 models are not sensitive to the selection of wall functions for both TKE and eddy viscosity, while the k-ω SST model should be applied together with kL-wall function for TKE and nutUB-wall functions for eddy viscosity to ensure accurate and stable boundary conditions. The applications to a backward-facing step flow at Re=155,000 reveal that the reattachment length is reasonably well predicted on appropriately refined mesh by all turbulence models, except the standard k-𝜖 model which about 13% underestimates the reattachment length regardless of the grid refinement.

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.237-244
• /
• 1996

Liquid-liquid extractions by use of microporous hollow fiber modules are fast compared with conventional extraction equipment because of the large surface area per volume. In these modules, the extractant and feed can be contacted at high speed and two flows are completely independent, so there are no problems with loading and channeling. In this paper, it was investigated the extraction selectivities for liquid-liquid extraction of Fe(II) and Ni(II) from dilute aqueous solution into TOA (tri-n-octylamine) and EHPNA (bis(2-ethylhexyle)hydrogenphosphite) as organic extractants by using the hydrophobic hollow fiber module. To determine the rate controlling step for mass transfer in hollow fibers, we also examined the effect of inside and outside flow rates of the hollow fiber module. From these experiments, we identified for the extraction of system with high partition coefficient in hydrophobic hollow fibers, mass transfer in the inside aqueous feed dominated the overall mass transfer, and in this paper, correlation between $K_w$ and $v_t$ was obtained as $K_w{\frac{d}{D}}=6.22\(\frac{d^2v_t}{LD}\)^{1/3}$ On the other hand, for the system with low partition coefficient, the resistance in the inside of hollow fibers was much less than membrane resistance because the extraction was not simple in the micropore. Thus, for systems with high partition coefficients, hydrophobic hollow fibers would be a better choice.

• Journal of Yeungnam Medical Science
• /
• v.13 no.1
• /
• pp.46-58
• /
• 1996

Inositol 1,4,5-triphosphate($InsP_3$) is a second messenger for mobilizing intracellular $Ca^{2+}$. It can be dephosphorylated by soluble and particulate forms on $InsP_3$ 5-phosphatase, or phosphorylated to produce inositol 1,3,4,5-tetrakisphosphate($InsP_3$) by $InsP_3$ 3-kinase. These enzymes represent possible targets for the regulation of the $InsP_3/InsP_4$ signal. $InsP_3$ 3-kinase which catalyses th ATP-dependent phosphorylation of $InsP_3$ was purified from bovine brain tissue. All operation were carried out at $4^{\circ}C$. Fresh tissure was homogenized and centrifuged. The supernatant was pooled. Proteins were precipitated from 10% polyethylene glycol, and suspended solution was applied to DEAE cellulose column for chromatography. As the result of above procedure, two isozymes of $InsP_3$ 3-kinase, I and II were obtained. Each isozyme was applied to Matriz green gel, Calmodulin-Affigel 15 column and subsequent phenyl-TSK HPLC column. Specific activites(SA) and fold of puriety were observed at each purification step of chromatography. At DEAE cellulose chromatography, SA were I, 0.6 and II, 4.8 nM/min/mg, and folds were I, 17.2 and II, 16.6. At Matrix green gel chromatography, SA were I, 18 and II, 11 nM/min/mg, folds were I, 62.1 and II, 38.0. At calmodulin-Affigel 15 column chromatography, SA were I, 19 and II, 13 nM/min/mg, folds were I, 65.5 and II, 44.8. Finally $InsP_3$ kinase I and II were purified 3,103-fold and 2,310-fold, and SA were I, 900 and II, 670 nM/min/mg, respectively. SDS-polyacrylamide gel electrophoresis elucidated 3 distinct fractions of Mr of 145,000, 85,000 and 69,500 from isozyme I, and 2 distinct fractions of Mr of 79,000 and 57,000 from isozyme II.

• Applied Chemistry for Engineering
• /
• v.19 no.6
• /
• pp.668-673
• /
• 2008

The objective of this study is to optimize the leaching conditions of sequential leaching and extracting processes for selective Ni recovery from spent Ni-Mo-based catalyst. The selective Ni recovery process consists of two processes of leaching and extracting process. In this 2-step process, Ni component is dissolved from solid spent Ni-Mo-based catalyst into leaching agent in leaching process and sequentially extracted to Ni complex with an extracting agent in the extracting process. The solutions of nitric acid ($HNO_3$), ammonium carbonate ($(NH_4)_2CO_3$) and sodium carbonate ($Na_2CO_3$) were used as a leaching agent in leaching process and oxalic acid was used as an extracting agent in extracting process. $HNO_3$ solution is the most efficient leaching agent among the various leaching agent. Also, the optimized leaching conditions for the efficient and selective Ni recovery were the leaching temperature of $90^{\circ}C,\;HNO_3$ concentration of 6.25 vol% and elapsed time of 3 h. As a result, Nickel oxalate having the highest yield of 88.7% and purity of 100% was obtained after sequentially leaching and extracting processes under the optimized leaching conditions.

• Smart Structures and Systems
• /
• v.21 no.5
• /
• pp.687-694
• /
• 2018

The problem of wheel tread defects has become a major challenge for the health management of high-speed rail as a wheel defect with small radius deviation may suffice to give rise to severe damage on both the train bogie components and the track structure when a train runs at high speeds. It is thus highly desirable to detect the defects soon after their occurrences and then conduct wheel turning for the defective wheelsets. Online wheel condition monitoring using wheel impact load detector (WILD) can be an effective solution, since it can assess the wheel condition and detect potential defects during train passage. This study aims to develop an FBG-based track-side wheel condition monitoring method for the detection of wheel tread defects. The track-side sensing system uses two FBG strain gauge arrays mounted on the rail foot, measuring the dynamic strains of the paired rails excited by passing wheelsets. Each FBG array has a length of about 3 m, slightly longer than the wheel circumference to ensure a full coverage for the detection of any potential defect on the tread. A defect detection algorithm is developed for using the online-monitored rail responses to identify the potential wheel tread defects. This algorithm consists of three steps: 1) strain data pre-processing by using a data smoothing technique to remove the trends; 2) diagnosis of novel responses by outlier analysis for the normalized data; and 3) local defect identification by a refined analysis on the novel responses extracted in Step 2. To verify the proposed method, a field test was conducted using a test train incorporating defective wheels. The train ran at different speeds on an instrumented track with the purpose of wheel condition monitoring. By using the proposed method to process the monitoring data, all the defects were identified and the results agreed well with those from the static inspection of the wheelsets in the depot. A comparison is also drawn for the detection accuracy under different running speeds of the test train, and the results show that the proposed method can achieve a satisfactory accuracy in wheel defect detection when the train runs at a speed higher than 30 kph. Some minor defects with a depth of 0.05 mm~0.06 mm are also successfully detected.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.1 s.51
• /
• pp.1-6
• /
• 2007

Hectorite was synthesized by a two-step hydrothermal process from $Mg(OH)_{2}$, water glass (${\sim}30\;wt%\;SiO_{2}$) and Li-compound at $90{\pm}5^{\circ}C$. The product shows excellent dispersion and swelling properties. The mixture of the starting materials was heated in a glass vessel for the first reaction with continuous stirring and the pH of the solution was adjusted to $6{\sim}8$, resulting in the formation of a precursor of hectorite. The excess salt components were washed out from the resulting slurry and then was matured in the glass vessel for the 2nd reaction. Li compound was added during the reaction. After a 10 h retention, the gel of hectorite was formed. The XRD pattern of the synthesized one was coincided with that of natural hectorite and SEM study revealed uniform grains 50 m in diameter. The d001 basal spacing of the product moved from 12 to $17.4\;{\AA}$ after glycolation treatment. The measured value of CEC and the swelling capacity was 90 cmol/kg and $60{\sim}70\;mL/2\;g$, respectively.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.526-532
• /
• 2008

The proposed $CO_2$ storage technology in the present study is a one-step sequestration process that stabilizes $CO_2$ in a reactor with Serpentine. The advantage of this technology is associated with its high stability of final product so that the entire system is recognized as permanent environment-friendly $CO_2$ removal method. Since the sequestration reaction mechanisms are generally understood that carbonation reaction proceeds with very slow rate, so that pretreatment method to increases reaction rate of $CO_2$ carbonation reaction should be developed. To increase the reactivity of Serpentine with $CO_2$, two different methods of pretreatment are carried out in the present investigation. One is heat-treatment, the other is chemical pretreatment. In this study, only chemical pretreatment is considered leaching method of magnesium from Serpentine using sulfuric acid at the various reaction temperatures, times, and acid concentrations. Experimental results illustrated that pretreatment by sulfuric acid increases surface area of serpentine from $11.1209m^2/g$ to $98.7903m^2/g$ and extracts magnesium compounds. Single variable experiment demonstrated the enhancements of magnesium extraction with increased reaction temperature and time. Amount of magnesium extraction is obtained by using the data of ICP-AES as maximum extraction condition of magnesium is 2 M acid solution, $75^{\circ}C$ and 1hr. After performing chemical pretreatment, carbonation yield increased from 23.24% to 46.30% of weight.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.65-72
• /
• 1993

A numerical method for nonlinear free-surface-wave problem is developed in this paper. The final goal of this study is to simulate the towing tank experiment of a ship model and to partially replace the experiment by the numerical model. The exact problem in the scope of potential flow theory is formulated by a variational principle based on the classical Hamilton's principle. A localized finite element method is used in the present numerical computations which made use of the following two notable steps. The first step is an efficient treatment of the numerical radiation condition by using the intermediate nonlinear-to-linear transition buffer subdomain between the fully nonlinear and linear subdomains. The second is the use of a modal analysis in the final stage of the solution procedures, which enables us to reduce the computation time drastically. With these improvements the present method can treat a much larger computational domain than that was possible previously. A pressure patch on the free surface was chosen as an example. From the present computed results we could investigate the effect of nonlinearity on the down-stream wave pattern more clearly than others, because much larger computational domain was treated. We found, specifically, the widening of the Kelvin angle and the increase of the wave numbers and the magnitude of wave profiles.

• Journal of Distribution Science
• /
• v.12 no.6
• /
• pp.41-48
• /
• 2014

Purpose - This study aims to investigate a solution to reduce the negative reactions arising from the performance of duties or the job distress of workers in the service industry, because human resource statistics regarding workers in the service sector have been unreported, while concerns regarding exposure to emotional exertion and poor working conditions have been continuously increasing. Research design, data, and methodology - This study specifically focused on workers in highway service areas. It differs from previous studies because it involves the perspective of the person-organization fit and regards workers' cognition of leaders through the psychological distance toward the leader and the contact frequency between workers and leaders within the framework of the leader-individual fit. Moreover, this study highlights the role of the self-leadership of workers as an important factor that becomes manifested in the individual-level fit to the organization. Hence, this study investigates whether the positive role of the above factors, in turn, could reduce job distress. Workers from highway service areas in Gyeonggi-do province provided data; 141 valid questionnaires are collected. SPSS 19.0 and AMOS 19.0 were used to test the reliability and validity of constructs. Simple regression, multiple regression, and 3 step mediation tests were used to test the hypotheses after the correlation tests. Results - Results indicated that leader-member contact frequency and psychological distance have negative effects on job distress but positive effects on self-leadership. A mediation test revealed that self-leadership, in the relationships between contact frequency and job distress and between psychological distance and job distress, resulted in partial mediation and full mediation, respectively. Conclusions - The result can be understood through two different possible explanations. First, service area workers generally possess a positive perspective toward their leaders. This can be interpreted to mean that increased contact frequency and psychological distance would be considered as supports from the leader, rather than intrusive controls or management schemes. Therefore, the management in highway service areas should invest efforts in increasing contact frequency as well as maximizing psychological similarities by adopting the viewpoints of workers in terms of moral and ethical management, to reduce the workers' job distress. The results relating to self-leadership also indicate that increased contact frequency must be accompanied by intentions for the effective promotion of workers' self-leadership. It also signifies the necessity of a strategic approach by leaders to induce workers to perceive "in-group"ness as suggested both by the similarity-attraction theory and by the social identity theory. In addition, the results of the mediation test of self-leadership indicate that because workers' self-leadership activates upon increased contact frequency by the leader, it should not be a means of control and should not be utilized only from the perspective of management. It is also suggested that strategies such as transfer of authority could have a positive effect in promoting the expansion of self-influence from workers.

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.229-239
• /
• 2016

The aim of this paper is to extend the TOPSIS(Technique for Order Performance by Similarity to Ideal Solution) to the fuzzy environment for solving the new professor selection problem in a university. In order to achieve the goal, the rating of each candidate and the weight of each criterion are described by linguistic terms which can be expressed in trapezoidal fuzzy numbers. In this paper, a vertex method is proposed to calculate the distance between two trapezoidal fuzzy numbers. According to the concept of the TOPSIS, a closeness coefficient is defined to determine the ranking order of all candidates. This research derived; 1) 4 evaluation criteria(research results, education and research competency, personality, major suitability) for new professor selection, 2) the 5 step procedure of the proposed fuzzy TOPSIS method for the group decision, 3) priorities of 4 candidates in the new professor selection case. The results of this paper will be useful to practical expert who is interested in analyzing fuzzy data and its multi-criteria decision-making tool for personal selection problem in personal management. Finally, the theoretical and practical implications of the findings were discussed and the directions for future research were suggested.