• Restorative Dentistry and Endodontics
• /
• v.32 no.5
• /
• pp.437-444
• /
• 2007

The purpose of this study was to compare the marginal microleakage of different 2-step adhesive systems in Class V cavities prepared with different diamond points. Forty Class V cavities were prepared with two different (coarse or fine) diamond points on cervical third of extracted molars. The occlusal and gingival margin of cavities was located in enamel and dentin, respectively. They were divided into one of four equal groups (n = 10) and ; Group 1-prepared with coarse diamond point (EX-41), restored with Single Bond and Z 250, Group 2-prepared with fine diamond piont (TF-21F), restored with Sing)e Bond and Z 250, Group 3-prepared with coarse diamond point (EX-41), restored with Clearfil SE Bond and Clearfil AP-X, Group 4-prepared with fine diamond point (TF-21F), restored with Clearfil SE Bond and Clearfil AP-X. Specimens were thermocycled, immersed in a 2% methylene blue solution for 24 hours, and bisected longitudinally. They were observed leakages at enamel and dentinal margins. Data were analyzed using Mann-Whitney and Wilcoxon signed ranked test. In this study, marginal microleakage or Single Bond was not affected by type of diamond points. But Clearfil SE Bond showed higher marginal microleakage at both enamel and dentinal margin when Class V cavity was prepared with coarse diamond point.

• Journal of the Korean School Mathematics Society
• /
• v.14 no.4
• /
• pp.423-442
• /
• 2011

The purpose of this study was to examine the effects of tasks setting for mathematical modelling in the complex real situations. The tasks setting(MMa, MeA) in mathematical modelling was so important that we can't ignore its effects to develop meaning and integrate mathematical ideas. The experimental setting were two groups ($N_1=103$, $N_2=103$) at public high school and non-experimental setting was one group($N_3=103$). In mathematical achievement, we found meaningful improvement for MeA group on modelling tasks, but no meaningful effect on information processing tasks. The statistical method used was ACONOVA analysis. Beside their achievement, we were much concerned about their modelling approach that TSG21 had suggested in Category "Educational & cognitive Midelling". Subjects who involved in experimental works showed very interesting approach as Exploration, analysis in some situation ${\Rightarrow}$ Math. questions ${\Rightarrow}$ Setting models ${\Rightarrow}$ Problem solution ${\Rightarrow}$ Extension, generalization, but MeA group spent a lot of time on step: Exploration, analysis and MMa group on step, Setting models. Both groups integrated actively many heuristics that schoenfeld defined. Specially, Drawing and Modified Simple Strategy were the most powerful on approach step 1,2,3. It was very encouraging that those experimental setting was improved positively more than the non-experimental setting on mathematical belief and interest. In our school system, teaching math. modelling could be a answer about what kind of educational action or environment we should provide for them. That is, mathematical learning.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.427-431
• /
• 1999

Copolyester resins for the coil coating process of aluminium and steel strip were synthesized and their thermal properties, molecular weight and solvent solution characteristics were examined. Copolyesters were obtained by two step reactions. The first step was to prepare bishydroxyethyl terephthalate (BHET), bishydroxyneopentyl terephthalate (BHNPT), bishydroxyethyl isophthalate (BHEI), bishydroxyneopentyl sebacate (BHNPS), bishydroxyneopentyl adipicate (BHNPA) and bishydroxyethyl adipicate (BHEA) oligomers by esterification reactions. The second step was the polycondensation reaction utilizing those oligomers to obtain relatively high molecular weight copolyesters (Mw = 30,000~59,000 g/mol) as measured by GPC. These copolyesters were amorphous polymers as shown by DSC without $T_m$ peaks probably due to the kink structure introduced by BHET oligomer and relatively large free volume by bulky BHNPT and BHNPS oligomers. The copolyester samples with half of BHET oligomer substituted by BHNPT while keeping BHEI (0.3 mole) and BHNPS (0.1 mole) ratio constant showed glass transition temperature above $40^{\circ}C$ and good solubility in toluene both at low ($-5^{\circ}C$) temperature and room temperature.

• Clean Technology
• /
• v.29 no.2
• /
• pp.87-94
• /
• 2023

The recovery of valuable metals from waste lithium-based secondary batteries is very important in terms of efficiently utilizing earth's limited number of resources. Currently, the cathode material of a LiFePO₄ battery, a type of battery which is widely used in automobiles, contains approximately 5% lithium. After use, the lithium in these batteries can be used again as a raw material for new batteries through lithium recycling. In this study, low-concentration sulfuric acid, a commonly used type of inorganic acid, was used to selectively leach the lithium contained in a waste LiFePO₄ cathode material powder. In addition, in order to compare and analyze the leaching efficiency and separation efficiency of each component, the optimalleaching conditions were derived by applying a two-step leaching process with pulp density being used as a variable during leaching. When leaching with pulp density as a variable, it was confirmed that at a pulp density of 200 g/L, the separation efficiency was approximately 200 times higher than at other pulp densities because the iron and phosphorus components were hardly leached at this pulp density. Accordingly, the pulp density of 200 g/L was used tooptimize the leaching conditions for the selective leaching and recovery of lithium.

• Korean Journal of Veterinary Research
• /
• v.36 no.2
• /
• pp.379-387
• /
• 1996

The objects of the present study were to establish the method of purification, subunit dissociation of verotoxin-2 (VT2) produced by Escherichia coli O157:H7, and to investigate the characteristics of purified verotoxin-2 such as molecular weight and composition of amino acid. The results were summerized as follows; Verotoxin-2 was extracted by addition of polymyxin B sulfate into bacterial cell lysate prepared from Escherichia coli O157:H7(KSC109). As an initial step, the bacterial cell lysate was precipitated with 30% saturated ammonium sulfate. The precipitated crude toxin was then subjected to anion-exchange, chromatofocusing and cation-exchange chromatography. Using this scheme, we obtained highly purified toxin with a specific activity of $1.1{\times}10^9$ $CD_{50}/mg$. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis(SDS-PAGE) for purified VT2 showed two protein bands. The upper band, approximately 32 Kd, was supposed as A subunit and the lower band, approximately 7.7 Kd, was supposed as B subunit. When the toxin was separated in the subunit-dissociating solution, two peaks emerged with retention times of 15 and 28 min by HPLC. These peaks represented A subunit and B subunit, respectively. The amino acid composition of purified VT2 were made up in order of glutamic acid, histamine, asparaginic acid, histidine, lysine, alanine and leucine etc. The largest amount among the amino acid composing VT2 was methionine.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.175-180
• /
• 2009

According to an increasing demand of political support and development on renewable energy as a solution for the energy problem in Korea, the government has established a goal to raise renewable energy supply from 2.27% to 5% until 2011. Especially in the case of public building in which energy use is in great demand, it would bring a great advantage to develop and utilize the Photovoltaic System as an electric energy and Geothermal Heat Pump System as a thermal energy. On the occasion of Photovoltaic System, Photovoltaic module can be used as an architectural material so that it can reduce construction cost and when we use solar energy, it is possible to make building's own power supply. As for Geothermal Heat Pump System, It can be used infinitely as long as the solar energy exist and operation cost is cheap and yearly efficiency is stable. However, we need to make a plan to reduce early investment expanses for these two renewable energy systems and to expand a diffusion rate as we develop a competitive domestic technology level. So in this study, we are going to perform evaluation of economical efficiency according to the introduction of Photovoltaic System and Geothermal Heat Pump System in public buildings which will be built up inside of Daegu Sin-seo innovation city. As a first step, we will investigate present installation condition of these two renewable energy systems and based upon that, will seek efficient introduction program of renewal energy systems that can be applied in public buildings.

• Korean Journal of Social Welfare
• /
• v.36
• /
• pp.259-283
• /
• 1998

This research is based on the assumption that Korea's social consensus among two sides of industry and government on Feb. 2 '98 was not just temporary response to the economic crisis caused by International Monetary Fund financial fund. Some arguments on the applicability of social democracy and corporatism and D. Donnison's perspective on Democratic Socialism are employed in search of an appropriate social consensus model for Korean situation. In the process of analyzing Korean situation in historical context it becomes apparent that there is embryo of stable social consensus beyond the level of tentative social cooperation to overcome the economic crisis. The next step applying the social consensus model to the employment policy for people with disability levels up empirical and theoretical validity of this research. It casts some implications for disability labour market which demands another kind of social consensus among people with disability, employers and the government. These implications include a desirable solution for hard lives of unemployed people with disability in economic difficulties and current policy issues facing Korean government.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.117-123
• /
• 2018

In this study, we suggest a fast image reconstruction scheme using Poisson equation from image gradient domain. In this approach, using the Poisson equation, a guided vector field is created by employing source and target images within a selected region at the first step. Next, the guided vector is used in generating the result image. We analyze the problem of reconstructing a two-dimensional function that approximates a set of desired gradients and a data term. The joined data and gradients are able to work like modifying the image gradients while staying close to the original image. Starting with this formulation, we have a screened Poisson equation known in physics. This equation leads to an efficient solution to the problem in FFT domain. It represents the spatial filters that solve the two-dimensional screened Poisson model and shows gradient scaling to be a well-defined sharpen filter that generalizes Laplace sharpening. We demonstrate the results using a discrete cosine transformation based this Poisson model.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.12
• /
• pp.1106-1114
• /
• 2012

To achieve synchronized motion between a wearable robot and a human user, the redundancy must be resolved in the same manner by both systems. According to the seven DOF (Degrees of Freedom) human arm model composed of the shoulder, elbow, and wrist joints, positioning and orientating the wrist in space is a task requiring only six DOFs. Due to this redundancy, a given task can be completed by multiple arm configurations, and thus there exists no unique mathematical solution to the inverse kinematics. This paper presents analysis on the kinematic and dynamic aspect of the human arm movement and their effect on the redundancy resolution of the human arm based on a seven DOF manipulator model. The redundancy of the arm is expressed mathematically by defining the swivel angle. The final form of swivel angle can be represented as a linear combination of two different swivel angles achieved by optimizing different cost functions based on kinematic and dynamic criteria. The kinematic criterion is to maximize the projection of the longest principal axis of the manipulability ellipsoid for the human arm on the vector connecting the wrist and the virtual target on the head region. The dynamic criterion is to minimize the mechanical work done in the joint space for each two consecutive points along the task space trajectory. As a first step, the redundancy based on the kinematic criterion will be thoroughly studied based on the motion capture data analysis. Experimental results indicate that by using the proposed redundancy resolution criterion in the kinematic level, error between the predicted and the actual swivel angle acquired from the motor control system is less than five degrees.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.3
• /
• pp.641-646
• /
• 2012

Objectives : The purpose of this study is to analyze the sterilizing effects of toothbrushes by administering bacteria into toothbrushes and reproducing the antibacterial effects using a microwave oven. Methods : The heads of four-row mid-strength toothbrushes were cut, put in a bacterial solution ($3{\times}10^9cells/ml$) for vortexing, and sterilized with microwaves for 0, 30, and 60 seconds. They were then moved into four tubes containing DW 10 ml and suspended in a vortex mixer for two minutes to separate bacteria from them. DW 9ml was added by 1ml of bacteria for dilution of $10{\sim}10^6$ times. It was then administered to the BHI agar plate by 0.1ml and cultured at $37^{\circ}C$ for 24 hours. Total number of bacteria adhered to a toothbrush was obtained by multiplying the number of colonies by the dilution factor. The experiment was done in the first, second, and third step, being repeated in a normal temperature drier ($23^{\circ}C$) after 5, 9 and 24 hours. Results : The results of the experiment revealed that the sterilizing effects were 95% or over. When toothbrushes were sterilized for 60 seconds, the number of colonies is about 11 after drying for 5 hours, 7 after drying for 9 hours and 2 after drying for 24 hours. The sterilizing effects reached 98% when the bacteria-administered toothbrush was sterilized for 1 minute after drying for 24 hours. Conclusions : The results demonstrated that toothbrush sterilizing by using microwave is a suitable way to prevent cross-contamination of toothbrushes by oral bacterial infection and thus easy to use at home. However, this study suggests that toothbrush sterilizing by using microwave should be limited within two times a week because the physical properties of toothbrush might be changed.