• The Journal of the Acoustical Society of Korea
• /
• 제21권1E호
• /
• pp.12-17
• /
• 2002

Two improvements are discussed in measurement of the complex Young's modulus of the acoustic materials by using the transfer function method. It is found that the accelerometer misalignment might result in the severe measurement error, particularly in high frequency range. The supporting structure is modified to attach the upper and lower accelerometers along the vertical axis. Secondly, the method fur solving the equation associated with wave model is described. The solution of the lumped mass-spring model is chosen as the starting value for low frequency range, while in the mid and high frequency, the solution to the previous frequency step is used as the initial values. Measurements are done for hard and soft rubber specimens. It is shown that the erroneous peaks in the transfer function, due to the measurement error, cause highly incorrect Young's modulus and loss factors.

• 한국수정란이식학회지
• /
• 제30권4호
• /
• pp.315-317
• /
• 2015

In vitro culture of murine embryos is an important step for in vitro production systems including in vitro fertilization and generations of genetically engineered mice. M16 is widely used commercialized culture media for the murine embryos. Compared to other media such as potassium simplex optimization medium, commercial M16 (Sigma) media lacks of amino acid, glutamine and antibiotics. In the present study, we optimized M16 based embryo culture system using commercialized antibiotics-glutamine or amino acids supplements. In vivo derived murine zygote were M16 media were supplemented with commercial Penicillin-Streptomycin-Glutamine solution (PSG; Gibco) or MEM Non-Essential Amino Acids solution (NEAA; Gibco) as experimental design. Addition of PSG did not improved cleavage and blastocyst rates. On the other hand, cleavage rate is not different between control and NEAA treated group, however, blastocyst formation is significantly (P<0.05) improved in NEAA treated group. Developmental competence between PSG and NEAA treated groups were also compared. Between two groups, cleavage rate was similar. However, blastocyst formation rate is significantly improved in NEAA treated group. Taken together, beneficial effect of NEAA on murine embryos development was confirmed. Effect of antibiotics and glutamine addition to M16 media is still not clear in the study.

• 한국전자거래학회지
• /
• 제1권1호
• /
• pp.209-226
• /
• 1996

System Intergration (SI) has resently been conceived as one df the most important tools for enforciong and reinforcing the competitiveness of an enterprise. A major concern of SI lies in sharing many types of information, such as engineering, production, finance, marketing, and so on. Product Data Management (PDM) systems are mainly concerned with product- related information, and also support a large portion of the Commerce At Light Speed (CALS) straitegy. PDM systems receive a great amount df attention form industry, A variety of PDM solutions have been introduced for the last few years, and its market has expanded very fast with an annual growth of 30%. However, in general, it is not an easy task to choose a right PDM solution for a particular company. A major purpose of this paper is to provide essential factors in evaluating PDM systems. While developing the factors. we consider the expected future trend of PDM technologies and three types of PDM-based intergration (frontward, rearward, and sideward integrations). We Propose to carry out the evaluation process in two fold. An overall evaluation is performed first to narrow down many alternatives into a few candidate systems, and then a detailed technical evaluation step follows to determine the final solution. A number of influencing factors are categorized and described in each of these steps.

• 한국환경성돌연변이발암원학회지
• /
• 제15권2호
• /
• pp.106-114
• /
• 1995

A method was developed to detect total mutagenicity of fried fish for S. typhimurium TA98, using Ames assay. Method described herein circumvented problems associated with the sample preparation for Ames assay, i.e., a multi-purification step of sample and interference with solvent residuals. Experiment A, the best method developed in the present study, consisted of two important steps: pH adjustment of the aqueous sample solution from fried fish samples to remove impurities, and simultaneous distillation extraction (SDE) for partially purified samples to remove volatile compounds from solvents. The procedure and results were described as below. Fillet of gizzard shad (Konosirus punctatus) fish sample fried for 10 min each side on the temperature-controlled fry-pan (210$\circ$C) was homogenized in an aqueous acidic solution (pH 2) with a homogenizer, followed by filtration through Celite. The tiltrate (pH 2), removed some impurities by extraction with chloroform:methanol (2:1, v/v) mixture, was adjusted pH to 10 and then centrifuged to remove precipitate. The ethylacetate extract from the tiltrate of pH 10 was rotoevaporated and purified by SDE apparatus for 2 hours. Experiment A revealed significantly higher revertants (1928 per 25 g fried sample) than other Experiment (B, C, or D) tested. Experiment A gave good results in the mutagenicity test of fried fish sample with few purification steps using only 25 g fried sample and 650 ml of solvents; and thus this method could be a useful tool for the screening the mutagenicity or antimutagenicity of other foods as well.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.819-823
• /
• 1996

In the large steel ingosts, void defects exhibiting microvoid shapes are inevitably formed in the V-segregation zone of the ingots during solidification. In the hot open-die forging process, material properties are improved by eliminating internal porosity. The void size is practically very small as compared with the huge large ingot. Thus, for deformation analysis of a large ingot, a massive number of elements are needed in order to describe a void surface and to uniform mesh sturcture. In the present work the Global/Local scheme has been introduced in order to reduce the computational time and to easily generate the mesh system as a void module of local mesh for obtaining the accurate solution around a void. The procedure of the global- local method consists of two steps. In the first step global analysis is carried out which seeks a reasonably good solution with a cpurse mesh system without describing a void. Then, a local analysis is performed locally with a fine mesh system under the size-criterion of a local region. The computational time has been greatly reduced. Though the work it has been shown that large ingot forging incorporation small voids can be effectively analyzed by using the proposed Global/Local scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권10호
• /
• pp.4640-4661
• /
• 2018

To cope with the explosive growth of Internet services, Service Function Chaining (SFC) based on Software-defined Networking (SDN) is an emerging and promising technology that has been suggested to meet this challenge. Determining the placement of Virtual Network Functions (VNFs) and routing paths that optimize the network utilization and resource consumption is a challenging problem, particularly without violating service level agreements (SLAs). This problem is called the optimal SFC placement problem and an Integer Linear Programming (ILP) formulation is provided. A greedy heuristic solution is also provided based on an improved two-step mapping algorithm. The obtained experimental results show that the proposed algorithm can automatically place VNFs at the optimal locations and find the optimal routing paths for each online request. This algorithm can increase the average request acceptance rate by about 17.6% and provide more than 20-fold reduction of the computational complexity compared to the Greedy algorithm. The feasibility of this approach is demonstrated via NetFPGA-10G prototype implementation.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.815-820
• /
• 2009

Binary nanoemulsions which are defined as the, oil-droplet suspensions in binary solution ($H_2O$/LiBr), are developed to enhance the heat and mass transfer performance of absorption refrigeration systems. In this study, a novel two-step method is proposed to prepare the stable oil-in-binary solution (O/S) emulsion. Polymer is used as a steric stabilizer to stabilize the oil-droplets in a strong electrolyte ($H_2O$/LiBr). It is found that the thermal conductivity of the binary nanoemulsion is inversely proportional to the emulsion size while the concentrations of oil and $H_2O$/LiBr are less dominant for the thermal conductivity of binary nanoemulsions.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.753-765
• /
• 2003

A finite element code for the numerical solution of the Navier-Stokes equation is parallelized by vertex-oriented domain decomposition. To accelerate the convergence of iterative solvers like conjugate gradient method, parallel block ILU, iterative block ILU, and distributed ILU methods are tested as parallel preconditioners. The effectiveness of the algorithms has been investigated when P1P1 finite element discretization is used for the parallel solution of the Navier-Stokes equation. Two-dimensional and three-dimensional Laplace equations are calculated to estimate the speedup of the preconditioners. Calculation domain is partitioned by one- and multi-dimensional partitioning methods in structured grid and by METIS library in unstructured grid. For the domain-decomposed parallel computation of the Navier-Stokes equation, we have solved three-dimensional lid-driven cavity and natural convection problems in a cube as benchmark problems using a parallelized fractional 4-step finite element method. The speedup for each parallel preconditioning method is to be compared using upto 64 processors.

• 한국산업융합학회 논문집
• /
• 제8권3호
• /
• pp.155-160
• /
• 2005

Kinetic studies were carried out for aquation of carbonatobis(ethylenediamine)cobalt(III) complexes in [H+] aqueous solution by UV/VIS-spectrophotometry. The rate law that in deduced from rate data is $rate=k_H{^+}[H^+]^{1.4}$ {$[Co(en)_2(CO_3)]^+$}1.0 where $k_H{^+}$ is the rate constant considering acidic catalyst, $H^+$ ion whose value is $0.241l{\cdot}mol^{-1}{\cdot}sec^{-1}$. The values of activation parameters Ea, ${\Delta}H^{\ast}$ and ${\Delta}S^{\ast}$ were $15.33Kcal{\cdot}mol^{-1}$, $14.52Kcal{\cdot}mol^{-1}$ and -57.49 e.u. respectively. On the basis of kinetic data and the observed activation parameters, we have proposed the mechanism that proceeds with two step protonations. The rate equation derived from the proposed mechanism has been in agreement with the observed rate equation. It has been seen that our modified mechanism for Harris's proton freequilibrium one prefer to the his concerted mechanism, and more the last product substitute $H_2O$ for $OH^-$ the Harris's mechanism in the acidity range 2 < pH < 5.

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.377-386
• /
• 1993

The purpose of this study was to evaluate the disinfection efficacy of root canal irrigation method and irrigation solution in infected root canals. Access cavity were prepared in single-rooted extracted human teeth and each canals were prepared with step-back method and sterilized with ethylene oxide gas. Prepared teeth were experimentally inoculated in the canals for 30 minutes with four aerobes(Streptococcus mutans, Stapylococcus aures, Streptococcus sanguis, and E. coli) and two anaerobes(Streptoccus intermedius, and Clostrium perfringens). Normal saline, 3% $H_2O_2$, and 3% NaOCl were used as irrgation solutions. And root canals were irrigated with each irrigation solutions manually with disposible syringe or ultrasonic instument. (Apoza Uitrasonc, Taiwan). The irrigation effect on the eradication of S. aures and S. intermedius with normal saline was not similar between manual method and ultrasonic method. No significant differences were observed in the eradication of E. coli and C. perfringens among the irrigation solution and irrespective of the irrigation methods. In S. aurues and S. mutans, there was somewhat different eradication effect according to irrigation solutions, but there was no significant difference between manual method and ultrasonic methods. These results suggest that ultrasonic irrigation method with saline is more effective in some strains than manual irrigation.