• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.1828-1829
• /
• 2006

In this paper, we propose sliding mode congestion controller for differentiated-services network. Two important issue in differentiated-services architecture are bandwidth guarantee and fair sharing of unsubscribed bandwidth among TCP flows with and without bandwidth reservation. We use tight upper and lower bounds for various settings of differentiated-services parameters using the loss-bounded model. The Sliding mode congestion controller scheme is designed using nonlinear control theory based on a nonlinear model of the network that is generated using fluid flow consideration. The methodology used is general and independent of technology, as for example TCP/IP or ATM. The sliding mode congestion controller methodology has been applied to an TCP network. We use NS-2 simulation to demonstrate that the proposed control methodology achieves the desired behavior of the network, and possesses important attributes. as e.g, stable and robust behavior, high utilization with bounded delay and loss, together with good steady-state and transient behavior.

• 대한교통학회지
• /
• 제18권1호
• /
• pp.47-59
• /
• 2000

본 연구에서는 고속도로 교통관리시스템에서 VDS 교통정보 와 대상지역의 TCS로부터 여행시간을 수집하고, 이들 자료를 토대로 신경망 이론을 이용한 여행시간 추정(Estimation)모형을 구축하였다. 또한, 신경망 이론에 칼만필터기법(Kalman Filter Technique)을 연계하여 단위시간 동안의 여행시간을 예측(Prediction)하여, 고속도로 이용자에게 보다 향상된 실시간 여행시간정보를 제공할 수 있는 여행시간 추정 및 예측 알고리즘을 개발하였다. 신경망 모형의 여행시간 추정 방식과 현재 적용되고 있는 여행시간 산출 방식의 비교/분석을 위해 각 각의 여행시간 산출방식에 의한 평가지표별로 시행한 평가의 결과는 신경망 모형이 제시한 대부분의 지표에서 상대적으로 우수하게 나타났다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권11호
• /
• pp.4331-4346
• /
• 2015

The femtocell network, which is designed for low power transmission and consists of consumer installed small base stations, coexists with macrocells to exploit spatial reuse gain. For its realization, cross-tier interference mitigation is an important issue. To solve this problem, we propose a joint access and power control scheme that requires limited information exchange between the femto and macro networks. Our objective is to maximize the network throughput while satisfying each user's quality of service (QoS) requirement. To accomplish this, we first introduce two distributed interference detection schemes, i.e., the femto base station and macro user equipment based schemes. Then, the proposed scheme dynamically adjusts the transmission power and makes a decision on the access mode of each femto base station. Through extensive simulations, we show that the proposed scheme outperforms earlier works in terms of the throughput and outage probability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권2호
• /
• pp.462-483
• /
• 2016

The research on optimization of cellular network's energy efficiency (EE) towards environmental and economic sustainability has attracted increasing attention recently. In this survey, we discuss the opportunities, trends and challenges of this challenging topic. Two major contributions are presented namely 1) survey of proposed energy efficiency metrics; 2) survey of proposed energy efficient solutions. We provide a broad overview of the state of-the-art energy efficient methods covering base station (BS) hardware design, network planning and deployment, and network management and operation stages. In order to further understand how EE is assessed and improved through the heterogeneous network (HetNet), BS's energy-awareness and several typical HetNet deployment scenarios such as macrocell-microcell and macrocell-picocell are presented. The analysis of different HetNet deployment scenarios gives insights towards a successful deployment of energy efficient cellular networks.

• 한국통신학회논문지
• /
• 제23권9A호
• /
• pp.2249-2257
• /
• 1998

In this paper, we propose the enhanced priority control algorithm that adaptively controls the cell service ratio according to the relative cell occupancy ratio of buffer. The asynchronous transfer mode (ATM) provides the means to support various multimedia services in broadband networks. To support multimedia services, various data traffics of different priorities should be controlled effectively. And also it needs congestion control functions required in the netowrk to carry out the control operation. To accomplish this in a flexible and effective manner, priority classes for the different services ar ecommonly used. The proposed enhanced priority control mechanism have two service calsses of the delay sensitive class and the loss sensitive class. The simulation results show that te proposed control mechanism improves the QoS, the charateristics of cell loss probability and mean cell delay time, by selecting propeor relativ ecell occupancy ratio of buffer and the average arrival rate.

• Journal of Communications and Networks
• /
• 제16권1호
• /
• pp.92-97
• /
• 2014

A novel method for extracting frequency slippage signal from radar full pulse sequence is presented. For the radar full pulse sequence received by radar interception receiver, radio frequency (RF) and time of arrival (TOA) of all pulses constitute a two-dimensional information sequence. In a complex and intensive electromagnetic environment, the TOA of pulses is distributed unevenly, randomly, and in a nonstationary manner, preventing existing methods from directly analyzing such time series and effectively extracting certain signal features. This work applies Gaussian noise insertion and structure function to the TOA-RF information sequence respectively such that the equalization of time intervals and correlation processing are accomplished. The components with different frequencies in structure function series are separated using empirical mode decomposition. Additionally, a chaos detection model based on the Duffing equation is introduced to determine the useful component and extract the changing features of RF. Experimental results indicate that the proposed methodology can successfully extract the slippage signal effectively in the case that multiple radar pulse sequences overlap.

• 전자공학회논문지B
• /
• 제32B권3호
• /
• pp.503-511
• /
• 1995

A batch-mode algorithm is proposed to increase the speed of learning in the error backpropagation algorithm with variable learning rate and variable momentum parameters in classification problems. The objective function is normalized with respect to the number of patterns and output nodes. Also the gradient of the objective function is normalized in updating the connection weights to increase the effect of its backpropagated error. The learning rate and momentum parameters are determined from a function of the gradient norm and the number of weights. The learning rate depends on the square rott of the gradient norm while the momentum parameters depend on the gradient norm. In the two typical classification problems, simulation results demonstrate the effectiveness of the proposed algorithm.

• 한국통신학회논문지
• /
• 제22권7호
• /
• pp.1403-1410
• /
• 1997

Because streaming mode connection server suitable to wide area ATM networks performs transmission, reception and lookup with time restriction for the transmission time of a cell, it has demerits of large cell loss incase that burst traffic occurs. Therefore, in this paper to decrease cell loss we propose a high speed CAM (Content Addressable Memory) which is capable of processing data of streaming mode connections server at a high speed. the proposed CAM is applied to forwarding table VPC map which performs function to output connection numbers about input VPI(Virtual Path Identifier)/VCI(Virtual Channel Identifier). The designed high speed CAM consist of DBL(Dual Bit Line) CAM structure performed independently write operation and match operation and two-port SRAM structure. Also, its simulation verification and full-custom layout is performed by Hspice and Composs tools in 0.8 .$\mu$m design rule.

• ETRI Journal
• /
• 제44권5호
• /
• pp.759-768
• /
• 2022

A novel energy harvesting technique that uses conducted electromagnetic interference as an energy source is presented. Conducted EMI generated from fluorescent light using a switched-mode power supply was measured and modeled as an equivalent voltage source. Two types of rectifier circuits-a bridge rectifier and a voltage doubler-were used as the harvesting devices for conducted EMI source. The matching networks were designed based on the equivalent model, and the harvested power was improved. The implemented energy harvester produces a regulated power over 68.9 mW and current over 15.1 mA while a regulated voltage can be selected between 3.3 V and 5 V. The proposed system shows the highest harvesting power indoor environment and can provide enough power for the Internet of Things devices.

• 한국콘텐츠학회논문지
• /
• 제2권1호
• /
• pp.86-97
• /
• 2002

본 논문에서는 먼저 국제 표준화기구인 ITU-T G.805의 계층화와 분할화 개념을 근간으로 초고속정보통신망 관리모델을 제시한다. 그리고 초고속정보통신망에서의 VP와 VC에 대한 구성 정보모델과 장애를 관리하기 위한 정보모델을 기술한다. 효율적인 장애를 관리하기 위해서 여기서는 두 가지종류로 알람을 구분하였다. 하나는 제공 중인 서비스에 직접적인 영향을 줄 수 있는 장애성 알람과 서비스에는 직접적으로는 영향을 주지 않는 경보성 알람으로 나누었다. 그리고 이들 알람을 처리하기 위해 장애성 알람처리 시스템과 경보성 알람처리 시스템에 대한 두 가지 연산모델을 제안한다. 또한 장애가 발생하였을 경우, 알람을 처리하는 절차에 대해서 기술하고 장애가 발생한 VP와 VC연결에 대한 연결 재설정 시 NMS와 SubNMS의 처리 범위와 처리과정에 대해서 기술한다. 끝으로 제안된 장애성 알람처리 시스템을 구현하고 알람 발생율에 따라 우선순위별 알람처리 시간을 비교한다.