• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.8
• /
• pp.1380-1385
• /
• 2006

A Pipelined Tone Wakeup(PTW) scheme(1) was proposed to support energy saving and end-to-end delay for sensor networks by providing an asynchronous wakeup pipeline to overlap the wakeup procedures with the packet transmission. But the scheme uses two radios and assumes error-free environments. In this paper, we propose a modified PTW scheme for wireless sensor networks. The proposed scheme is based on the PTW. The difference is that next hop information will be included in the ack packet from receiver node to sender node, So all the other neighbor nodes can stay in sleep mode long enough to save energy. Also ore get enhanced delay performance.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.85-91
• /
• 2007

The satellite networks provide global coverage. The integration of terrestrial networks with a satellite network is the most attractive approach to develop a global communication system. The IP Multimedia Subsystem (IMS) is intended to be the system that will merge the internet with the telecom world. A user with a dual-mode terminal can access both the satellite network and terrestrial network. The seamless handoff between two networks and a user's QoS level is the major issue concerning this integration. In this paper, we propose IMS-based satellite/terrestrial integrated network architecture for a global communication system. Based on the proposed architecture, an inter-network handoff and end-to-end soft QoS procedure is discussed. Our proposed soft QoS scheme is also analyzed to calculate the number of rejected calls.

• Journal of Mechanical Science and Technology
• /
• v.20 no.2
• /
• pp.251-261
• /
• 2006

The objective of this work is to apply artificial neural networks for solving inverse problems in the structural optimization of a fiber optic pressure sensor. For the sensor under investigation to achieve a desired accuracy, the change in the distance between the tips of the two fibers due to the applied pressure should not interfere with the phase change due to the change in the density of the air between the two fibers. Therefore, accurate dynamic analysis and structural optimization of the sensor is essential to ensure the accuracy of the measurements provided by the sensor. To this end, a normal mode analysis and a transient response analysis of the sensor were performed by combining commercial finite element analysis package, MSC/NASTRAN, and MATLAB. Furthermore, a parametric study on the design of the sensor was performed to minimize the size of the sensor while fulfilling a number of constraints. In performing the parametric study, the need for a relationship between the design parameters and the response of the sensor was fulfilled by using a neural network. The whole process of the dynamic analysis using commercial finite element analysis package and the parameter optimization of the sensor were automated within the MATLAB environment.

• Computers and Concrete
• /
• v.17 no.4
• /
• pp.541-551
• /
• 2016

Asphalt pavements are exposed to complex weather conditions and vehicle traffic loads leading to crack initiation and crack propagation in asphalt pavements. This paper presents the impact of weather conditions on fracture toughness of an asphalt concrete, prevalently employed in Ardabil road networks, under tensile (mode I) and shear (mode II) loading. An improved semi-circular bend (SCB) specimen was employed to carry out the fracture experiments. These experiments were performed in two different weather conditions namely fixed and cyclic temperatures. The results showed that consideration of the impact of temperature cycling resulted in decreasing the fracture toughness of asphalt concrete significantly. Furthermore, the fracture toughness was highly affected by loading mode for the both fixed and cyclic temperature conditions studied in this paper. In addition, it was found that the MTS criterion correctly predicts the onset of fracture initiation although this prediction was slightly conservative.

• Current Optics and Photonics
• /
• v.1 no.4
• /
• pp.315-324
• /
• 2017

In recent years, multicast services such as high-definition television (HDTV), video conferencing, interactive distance learning, and distributed games have increased exponentially, and wavelength-division multiplexing (WDM) networks are considered to be a promising technology due to their support for multicast applications. Multicast survivability in WDM networks has been the focus of extensive attention since a single-link failure in an optical network may result in a massive loss of data. But the improvement of network survivability increases energy consumption due to more resource allocation for protection. In this paper, an energy-efficient multicast algorithm (EEMA) is proposed to reduce energy consumption in WDM networks. Two cost functions are defined based on the link state to determine both working and protection paths for a multicast request in WDM networks. To increase the number of sleeping links, the link cost function of the working path aims to integrate new working path into the links with more working paths. Sleeping links indicate the links in sleep mode, which do not have any working path. To increase bandwidth utilization by sharing spare capacity, the cost function of the protection path is defined to use sleeping fibers for establishing new protection paths. Finally, the performance of the proposed algorithm is evaluated in terms of energy consumption, and also the blocking probability is evaluated under various traffic environments through OPNET. Simulation results show that our algorithm reduces energy consumption while maintaining the quality of service.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.149-168
• /
• 2015

In cognitive radio networks (CRNs), hybrid overlay and underlay sharing transmission mode is an effective technique for improving the efficiency of radio spectrum. Unlike existing works in the literature, where only one secondary user (SU) uses overlay and underlay modes, the different transmission modes should be allocated to different SUs, according to their different quality of services (QoS), to achieve the maximal efficiency of radio spectrum. However, hybrid sharing mode allocation for heterogeneous services is still a challenge in CRNs. In this paper, we propose a new resource allocation method for hybrid sharing transmission mode of overlay and underlay (HySOU), to achieve more potential resources for SUs to access the spectrum without interfering with the primary users. We formulate the HySOU resource allocation as a mixed-integer programming problem to optimize the total system throughput, satisfying heterogeneous QoS. To decrease the algorithm complexity, we divide the problem into two sub-problems: subchannel allocation and power allocation. Cutset is used to achieve the optimal subchannel allocation, and the optimal power allocation is obtained by Lagrangian dual function decomposition and subgradient algorithm. Simulation results show that the proposed algorithm further improves spectrum utilization with a simultaneous fairness guarantee, and the achieved HySOU diversity gain is a satisfactory improvement.

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.177-184
• /
• 2006

A handover is a technology that enables data transmission and receipt seamlessly while a mobile station moves from the current base station to another base station. The handover is basically classified into two types; a horizontal handover which changes a radio link only without changing a network link, and a vertical handover which changes both in heterogeneous networks. In this paper, we propose a vertical handover protocol in a dual base station which supports both of W-CDMA and WiBro networks based on SDR (Software Defined Radio), verify the rightness using a state transition diagram and a Petri-net, and evaluate the performance of the proposed protocol using NS-2 simulator.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1324-1343
• /
• 2014

In recent years, the problem of spectrum mobility in Cognitive Radio (CR) Networks has been widely investigated. In order to utilize spectrum resources completely, many spectrum handoff techniques based on game theory have been proposed, but most studies only concern that users how to achieve better payoffs, without much attention to the diverse needs of users. In this paper, we propose a new channel-switching model based on game theory, using a prioritized approach to meet the diverse needs of users in two different modes (CQ and PS). At the same time, this paper proposes some acceleration techniques to reach the Nash equilibrium more efficiently. We evaluate the performance of the proposed schemes depending on priority using real channel availability measurements, and conclude that the channel quality function (CQ) mode provide better service for priority user but the plan-sorting (PS) mode can be more suitable in multiple priority users exist scene.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.3908-3920
• /
• 2015

In this paper, performance analysis of full-duplex (FD) relay selection under decode-and-forward (DF) relaying mode is carried out by taking into account several critical factors, including the distributions of the received signal-to-noise ratio (SNR) and the outage probability of wireless links. The tradeoff between the FD and half-duplex (HD) modes for relay selection techniques is also analyzed, where the former suffers from the impact of residual self-interference, but the latter requires more channel resources than the former (i.e., two orthogonal channels are required). Furthermore, the impact of optimal power allocation (OPA) on the proposed relay-selection scheme is analyzed. Particularly, the exact closed-form expressions for outage probability of the proposed scheme over Rayleigh fading channels are derived, followed by validating the proposed analysis using simulation. Numerical results show that the proposed FD based scheme outperforms the HD based scheme by more than 4 dB in terms of coding gain, provided that the residual self-interference level in the FD mode can be substantially suppressed to the level that is below the noise power.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.3921-3944
• /
• 2015

Currently Energy-Saving (ES) methods in cellular networks could be improved, as compensation method for irregular Base Station (BS) deployment is not effective, most regional ES algorithm is complex, and performance decline caused by ES action is not evaluated well. To resolve above issues, a low-complexity energy efficient BS cooperation mechanism for Long Time Evolution (LTE) networks is proposed. The mechanism firstly models the ES optimization problem with coverage, resource, power and Quality of Service (QoS) constraints. To resolve the problem with low complexity, it is decomposed into two sub-problems: BS Mode Determination (BMD) problem and User Association Optimization (UAO) problem. To resolve BMD, regional dynamic multi-stage algorithms with BS cooperation pair taking account of load and geographic topology is analyzed. And then a distributed heuristic algorithm guaranteeing user QoS is adopted to resolve UAO. The mechanism is simulated under four LTE scenarios. Comparing to other algorithms, results show that the mechanism can obtain better energy efficiency with acceptable coverage, throughput, and QoS performance.