• Tribology and Lubricants
• /
• 제32권1호
• /
• pp.1-8
• /
• 2016

This paper focuses on the thermal deformation induced preload change in the tilting pad journal bearing, using a three-dimensional (3D) thermo-hydro-dynamic (THD) approach. Preload is considered as a critical factor in designing the tilting pad journal bearing. The initial preload measured under nil external load and nil thermal gradient is influenced by two factors, namely, the thermal deformation and elastic deformation. Thermal deformation is due to a temperature distribution in the bearing pads, whereas the elastic deformation is due to fluid forces acting on the pads. This study focuses on the changes induced in preload and film clearance due to thermal deformation. The generalized Reynolds equation is used to evaluate the force of the fluid and the 3D energy equation is used to calculate the temperature of the lubricant. The abovementioned equations are combined by establishing a relationship between viscosity and temperature. The heat transfer within the bearing pads, the lubricant, and the spinning journal is calculated using the heat flux boundary condition. The 3D Finite Element Method (FEM) is used in modeling the (1) heat conduction in the spinning journal and bearing pads, (2) thermal gradient induced thermal distortion of the spinning journal and pads, and (3) viscous shearing, and heat conduction and convection in a thin film. This evaluation method has an increased fidelity, and it can prove to be a cost-effective tool that can be used by designers to predict the dynamic behavior of a bearing.

• Steel and Composite Structures
• /
• 제49권3호
• /
• pp.307-323
• /
• 2023

In this research, the study of the thermoelastic flexural analysis of silicon carbide/Aluminum graded (FG) sandwich 2D uniform structure (plate) under harmonic sinusoidal temperature load over time is presented. The plate is modeled using a simple two dimensional integral shear deformation plate theory. The current formulation contains an integral terms whose aim is to reduce a number of variables compared to others similar solutions and therefore minimize the computation time. The transverse shear stresses vary according to parabolic distribution and vanish at the free surfaces of the structure without any use of correction factors. The external load is applied on the upper face and varying in the thickness of the plates. The structure is supposed to be composed of "three layers" and resting on nonlinear visco-Pasternak's-foundations. The governing equations of the system are deduced and solved via Hamilton's principle and general solution. The computed results are compared with those existing in the literature to validate the current formulation. The impacts of the parameters (material index, temperature exponent, geometry ratio, time, top/bottom temperature ratio, elastic foundation type, and damping coefficient) on the dynamic flexural response are studied.

• Journal of the Korean Wood Science and Technology
• /
• 제47권6호
• /
• pp.732-750
• /
• 2019

천연건조 중 목재의 함수율 변화 예측모형을 제시하기 위하여 15본의 소나무 원목에 대한 천연건조를 수행하였다. 초기함수율이 68.7%인 6본의 소나무 원목에 대하여 여름철에 천연건조를 시작한 후 약 880일이 경과한 후의 최종함수율은 17.4%이었다. 초기함수율이 35.8%인 9본의 소나무 원목에 대하여 겨울철에 천연건조를 시작한 후 약 760일이 경과한 후의 최종함수율은 16.0%이었다. 소나무 원목의 말구지름, 온도, 상대습도, 풍속을 독립변수로 결정하고, 천연건조 중 감소한 함수율을 종속변수로 다중회귀분석을 진행한 결과, 결정계수 0.925의 회귀모형을 얻을 수 있었다. 소나무 원목의 특성인 초기함수율과 말구지름이 기상조건인 온도, 상대습도, 풍속에 비하여 천연건조 중 함수율 감소에 미치는 영향이 더 크게 나타났다. 천연건조 중 내부함수율의 분포 및 함수율 변화를 예측하기 위하여 2차원 물질전달 해석을 수행하였다. 건조일수를 서로 다르게 적용하고, 수분확산계수 및 표면방사계수를 결정하는 기상조건을 다르게 적용한 2가지의 예측모형을 제시하였다. 2가지 적용 방법의 오차는 0.1 - 0.8%의 범위였으며, 측정값과의 차이는 2.2 - 3.6%의 범위였다. 다양한 초기함수율과 말구지름의 소나무 원목에 대한 천연건조 중 내부함수율을 측정하고, 각각의 기상조건에 대한 목재 내 수분이동계수를 산출하면 예측모형의 오차를 감소시킬 수 있을 것으로 판단된다.

• 한국기계가공학회지
• /
• 제15권6호
• /
• pp.24-34
• /
• 2016

To attach a fuel tank to an excavator, two sets of mounting plates on which three bosses are attached are welded onto the tank. In this study, the welding process of a fuel tank for an excavator was modeled using a finite element numerical method. The tank was modeled as a simple plate to which the mounting plate or bosses were attached by fillet welding. Thermal and thermo-elasto-plastic analyses of the welding process were carried out to predict the temperature distribution and material distortion during welding, respectively. Three different welding sequences for the tank were also modelled to compare the deformation that occurred due to each welding sequence. The results of the analysis predicted that changing the welding sequence around the mounting plate could not position the boss within the allowable dimensional range. The results also revealed the sequence in which the maximum distortion of the bosses welded onto the tank was 30% less than the maximum distortion due to the other sequences.

• 소성∙가공
• /
• 제15권8호
• /
• pp.621-627
• /
• 2006

Recently, micro-alloyed steels which could eliminate heat treatments after forging has been developed. These non heat-treated micro-alloyed steels have several advantages over the conventional quenched and tempered steel for cold forging. First of all, long components can be fabricated with a better dimensional accuracy since bending of long forged part after quenching treatment could be avoided. And it is possible to eliminate two energy consuming heat treatment steps, which are a spherodizing before forging and quenching/tempering after forging. Therefore, more cost effective and environment friendly process could be designed. However, there is non-uniform distribution of strain occurred across the forged part, since these non heat-treated micro-alloyed steel use strain hardening mechanism. In the present study, it was investigated how to lessen non-uniformity and increase strength together for cold forging when a baking heat treatment is applied in micro-alloyed steels. For this purpose, micro-alloyed steels developed by Se-A Besteel recently was used for the experiment.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.908-913
• /
• 2000

In the process of integrity evaluation for nuclear power plant components, a series of fracture mechanics evaluation on surface cracks in reactor pressure vessel(RPV) must be conducted. These fracture mechanics evaluations are based on stress intensity factor, K. However, under pressurized thermal shock(PTS) conditions, the combination of thermal and mechanical stress by steep temperature gradient and internal pressure causes considerably high tensile stress at the inside of RPV wall. Besides, the internal pressure during the normal operation produces high tensile stress at the RPV wall. As a result cracks on inner surface of RPVs may experience elastic-plastic behavior which can be explained with J-integral. In such a case, however, J-integral may possibly lose its validity due to constraint effect. In this paper, in order to verify the suitability of J-integral, two dimensional finite element analyses were applied for various surface crack. Total of 18 crack geometries were analyzed, and Q stresses were obtained by comparing resulting HRR stress distribution with corresponding actual stress distributions. In conclusion, HRR stress fields were found to overestimate the actual crack-tin stress field due to constraint effect.

• 한국가시화정보학회지
• /
• 제8권1호
• /
• pp.53-60
• /
• 2010

Experimental investigations were conducted to study the characteristics of turbulent swirling flow in an axisymmetric annuli. Swirl angle measurements were performed using a flow visualization technique using smoke and dye liquid for Re=60,00080,000. Using the two-dimensional particle image velocimetry method, we found the time-mean velocity distribution and turbulent intensities in water with swirl for Re=20,000, 30,000, and 40,000 along longitudinal sections. Neutral points occurred for equal axial velocity at y/(R-r)=0.70.75, and the highest axial velocity was recorded near y/(R-r)=0.9. Negative axial velocity was observed near the convex tube along X/(D-d)=3~23. Another experimental study was performed to investigate heat transfer characteristics of turbulent swirling flow in an axisymmetric annuli. Static pressure, and local flow temperature were measured using tangential inlet condition and the friction factors and Nusselt number were calculated for several Reynolds numbers.

• 한국전기전자재료학회논문지
• /
• 제12권1호
• /
• pp.18-26
• /
• 1999

In this study, the undoped amorphous layers and phosphorus doped amorphous layers are fabricated using LPCVD at 531$^{\circ}C$ with SiH$_4$ gas or at same temperature with PH$_3$ gas during deposition, respectively. The thickness of deposited amorphous layer from this experiments was 5000 ${\AA}$. In this experiments, undoped amorphous layers are deposited with SiH$_4$and Si$_2$H$\_$6/ gas in a low pressure reactor using LPCVD. These amorphous layers can be doped for poly-silicon by phosphorus ion implantation. The experiments of this study are carried out by phosphorus ion implantation with energy 40 keV into P doped and undoped amorphous silicon layers. The distribution of phosphorus profiles are measured by SIMS(Cameca 6f). Recoiling effects and two dimensional profiles are also explained by comparisions of experimental and simulated data. Finally range moments of SIMS profiles are calculated and compared with simulation results.

• 농업과학연구
• /
• 제33권1호
• /
• pp.85-95
• /
• 2006

A model experiment has been performed to get the heat transfer coefficient on the soil surface in the closed ecosystem. The heat flux on the soil surface was measured and the heat transfer coefficient was derived in the following two cases with 5-stepped control of inside air current speed. One case was that heat flowed from air to soil and the other case was that heat flowed from soil to air. Three dimensional CFD model has been set to simulate thermal environment in the closed ecosystem including soil layers. The standard $k-{\varepsilon}$ model of the CFD program was chosen for turbulence model and heating wire buried in the soil layers was set as heat source option to simulate the case when the temperature of soil surface was higher than that of inside air in the closed ecosystem. Between one case that heat flowed from air to soil and the other case that heat flowed from soil to air, there were big differences in the temperature distribution of soil layers and the heat transfer coefficient of the soil surface. The increasing rate of heat transfer coefficient on each case according to the increase of inside air current speed was similar to each other and it respectively increased linearly. But the heat transfer coefficient on the case that heat flowed from soil to air was much bigger than that of the other case. The model was validated by comparing simulated values of CFD model with measured values of the model experiment. Simulated and measured temperature of inside air and soil layers, and heat transfer coefficient of the soil surface were well accorded and the range of corrected $R^2$ was 0.664 to 0.875. The developed CFD model was well simulated in parts of the temperature of inside air and soil layers, the distribution of the inside air current speed, and heat transfer coefficient of the soil surface were able to be quantitatively analyzed by using this model. Therefore, the model would be applied and used for analysis of heat transfer coefficient between air and surface in various agricultural facilities.

• 에너지공학
• /
• 제7권2호
• /
• pp.209-215
• /
• 1998

본 연구에서는 수평 가공층의 하부에서 가열하고 상부에서 냉각하는 자연대류현상을 Brinkman-Darcy 방정식을 이용하고 하부 경계면에서 상부 경계면으로 균일한 관통류가 있을 경우를 고려하여 수직 관통류가 자연대류에 미치는 영향에 대하여 연구하였다. 관통류가 없을 경우의 임계 Rayleigh수와 있을 경우의 임계 Rayleigh수를 비교하였다. 또, 일정한 Rayleigh수에서의 관통류의 세기에 따른 Nusselt수, 등온선의 형태, 유동현상의 변화를 고찰하였다. 이와 같은 연구를 하기 위해 수치 해석적 연구로는 2차원 비정상 유동으로 가정하고 유한차분법(FDM)을 이용하였으며, 실험적 연구에서는 수치해석상의 결과를 검증하기 위해 액정(Liquid Crystal)을 시험체적 앞면에 부착하여 관통류의 세기에 따른 온도장의 재 분포를 가시화 하였다. 결론적으로 관통류는 순수 자연대류상에서의 온도장의 형태를 크게 변화시키고, 관통류의 세기가 강해짐으로써 대류 열전달의 불안정성이 감소함을 알 수 있었다. 또, Nusselt수를 구함으로써 대류열전달의 강도를 추정할 수 있었다.