• Composites Research
• /
• 제32권1호
• /
• pp.65-70
• /
• 2019

항공기 복합재료 날개 구조는 대부분 접착 혹은 패스너로 체결되어 있는데, 이러한 적층 구조 복합재료는 층간 강도가 취약하여 층간 분리가 일어나기 쉽다. 이러한 적층 복합재료의 단점을 보완하기 위해 두께 방향의 섬유를 보강한 3차원 직조형 복합재료를 통하여 강도, 손상 내구성, 충격 및 피로 하중을 향상시킬 수 있다. 또한, 자동화된 직조 공정에 의하여 단일 구조 near-net-shape의 프리폼 제조가 가능하기 때문에 공정 단축, 체결 부품 감소로 복합재료 전체 가격을 절감할 수 있다. 따라서 본 연구에서는 3차원 직조형 복합재료의 항공기 구조물 적용 가능성을 확인하기 위하여 3차원 프리폼의 기본적인 구조인 orthogonal(ORT), layer-to-layer(LTL), through-the-thickness(TTT) 패턴을 직조하고 이를 복합재료로 성형하여 압축 시험, 인장 시험, Open-hole 인장 시험을 하였다. 이 중 orthogonal 직조 복합재료가 인장 및 압축 탄성계수와 강도 모두 가장 높았으며 노치 민감도에서도 orthogonal 복합재료가 일방향 적층복합재료나 패브릭 적층 복합재료에 비하여 가장 우수한 특성을 보였다.

• 한국지반환경공학회 논문집
• /
• 제10권2호
• /
• pp.29-36
• /
• 2009

본 연구에서는 2차원 유한요소해석을 통하여 부마찰(negative skin friction) 이 작용하는 단독말뚝의 거동을 분석하였다. 압밀의 진행에 따른 부마찰의 변화를 검토하기 위하여 압밀해석을 실시하였으며, 말뚝과 주변지반 사이에서의 항복(yielding, slip)을 고려하였다. 일반적으로 널리 사용되는 -방법에 의해 부마찰력을 산정하는 경우 중립면 부근에서의 전단강도의 부분발현 및 지중응력의 감소를 반영할 수 없기 때문에 정밀유한요소 해석에 비하여 부마찰력이 25% 정도 과하게 평가된다. 압밀이 진행 중일 때 말뚝과 지반사이 대부분의 구간에서 항복이 발생하는 경우 더 이상의 부마찰력의 증가는 그리 크지 않은 것으로 나타났다. 부마찰이 발생하는 말뚝에 코팅을 실시하는 경우 부마찰력의 크기 및 말뚝의 침하를 효과적으로 감소시킬 수 있으나, 말뚝두부에 상재하중이 작용할 때 말뚝의 선단이 충분히 견고한 지지층에 설치되어 있지 않은 경우 말뚝의 마찰저항력이 매우 작아서 말뚝에 큰 침하가 발생할 우려가 있는 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.167-174
• /
• 2001

Reflection method using ultrasonic source has been attempted to obtain the information about tunnel lining structures composed of lining, shotcrete, water barrier and voids at the back of lining. In this work, two different types of sources, i.e. single-pulse source and sweep source, can be used. Single-pulse source with short time duration has the frequency content whose amplitudes tend to be concentrated around the dominant frequency, whereas sweep source with long time duration denotes a flat distribution of relatively larger amplitude over a broad frequency band, although the peak to peak amplitude of single-pulse source wavelet is equivalent to that of sweep source one. In traditional seismic application, a single-pulse source(weight drop, dynamite) is typically used. However, to investigate the fine structure, as it is the case in the tunnel lining structure, the sweep wavelet can be also a desirable source waveform primarily due to the higher energy over a broad frequency band. For the investigation purposes of sweep source, a physical modeling is a useful tool, especially to study problems of wave propagation in the fine layered media. The main purpose of this work was using a physical modeling technique to explore the applicability of sweep source to the delineation of inner layer boundaries. To this end, a two-dimensional physical model analogous to the lining structure was built and a special ultrasonic sweep source was devised. The measurements were carried out in the sweep frequency range 10 ∼ 60 KHz, as peformed in the regular reflection survey(e.g. roll-along technique). The measured data were further rearranged with a proper software (cross-correlation). The resulting seismograms(raw data) showed quitely similar features to those from a single-pulse source, in which high frequency content of reflection events could be considerably emphasized, as expected. The data were further processed by using a regular data processing system "FOCUS" and the results(stack section) were well associated with the known model structure. In this context, it is worthy to note that in view of measuring condition the sweep source would be applied to benefit the penetration of high frequency energy into the media and to enhance the resolution of reflection events.

• Journal of Mechanical Science and Technology
• /
• 제16권9호
• /
• pp.1137-1146
• /
• 2002

An experiment has been conducted on the flow and heat transfer characteristics of film coolant injected from a row of five holes with compound angle orientations of 35$^{\circ}$ inclination angle and 45$^{\circ}$ orientation angle. The Reynolds number based on the mainstream velocity and injection hole diameter 3.58${\times}$10$^4$. Three-dimensional velocity, film cooling effectiveness and heat transfer coefficient data are presented at three different mass flux ratios of 0.5, 1.0 and 2.0. Flow entrainment has been found between the vortices generated by adjacent injectants. The injectant with compound angle orientation entrains not only the mainstream boundary layer flow but also the adjacent injectant. Because of the flow entrainment, the injectant. With compound angle orientation is characterized by a single vortex while two bound vortices are usually observed in the case of simple angle injection. The strength of the secondary flow depends strongly on the mass flux ratio, which shows significant influence on the film cooling effectiveness and heat transfer coefficient.

• Earthquakes and Structures
• /
• 제11권3호
• /
• pp.461-481
• /
• 2016

The research described in this paper investigates the seismic behaviour of lightly reinforced concrete (RC) bearing sandwich panels, heavily conditioned by shear deformation. A numerical model has been prepared, within an open source finite element (FE) platform, to simulate the experimental response of this emerging structural system, whose squat-type geometry affects performance and failure mode. Calibration of this equivalent mechanical model, consisting of a group of regularly spaced vertical elements in combination with a layer of nonlinear springs, which represent the cyclic behaviour of concrete and steel, has been conducted by means of a series of pseudo-static cyclic tests performed on single full-scale prototypes with or without openings. Both cantilevered and fixed-end shear walls have been analyzed. After validation, this numerical procedure, including cyclic-related mechanisms, such as buckling and subsequent slippage of reinforcing re-bars, as well as concrete crushing at the base of the wall, has been used to assess the capacity of two- and three-dimensional low- to mid-rise box-type buildings and, hence, to estimate their strength reduction factors, on the basis of conventional pushover analyses.

• 한국정밀공학회지
• /
• 제30권8호
• /
• pp.878-884
• /
• 2013

Stereolithography can be classified into two main categories according to the cross-sectional shape: scanning type and projection type. Projection stereolithography has significant advantages when making a layer using a single patterned beam, and results in improved speed and accuracy. To implement relatively low-cost projection stereolithography, we developed a system using a commercially available resin, which cures on exposure to visible light. The optimum photoinitiator was investigated, as well as the mixing ratio. The viscosity, shrinkage, curing depth and tensile strength were evaluated through several experiments on fabricated three-dimensional structures, and thus an optimal resin selection system was developed.

• Steel and Composite Structures
• /
• 제26권3호
• /
• pp.273-287
• /
• 2018

Buckling and free vibration analysis of sandwich micro plate (SMP) integrated with piezoelectric layers embedded in orthotropic Pasternak are investigated in this paper. The refined Zigzag theory (RZT) is taken into consideration to model the SMP. Four different types of functionally graded (FG) distribution through the thickness of the SMP core layer which is reinforced with single-wall carbon nanotubes (SWCNTs) are considered. The modified couple stress theory (MCST) is employed to capture the effects of small scale effects. The sandwich structure is exposed to a two dimensional magnetic field and also, piezoelectric layers are subjected to external applied voltages. In order to obtain governing equation, energy method as well as Hamilton's principle is applied. Based on an analytical solution the critical buckling loads and natural frequency are obtained. The effects of volume fraction of carbon nanotubes (CNTs), different distributions of CNTs, foundation stiffness parameters, magnetic and electric fields, small scale parameter and the thickness of piezoelectric layers on the both critical buckling loads and natural frequency of the SMP are examined. The obtained results demonstrate that the effects of volume fraction of CNTs play an important role in analyzing buckling and free vibration behavior of the SMP. Furthermore, the effects of magnetic and electric fields are remarkable on the mechanical responses of the system and cannot be neglected.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.561-561
• /
• 2012

Graphene, two dimensional single layer of carbon atoms, has tremendous attention due to its superior property such as fast electron mobility, high thermal conductivity and optical transparency, and also found many applications such as field-effect transistors (FET), energy storage and conversion, optoelectronic device, electromechanical resonators and chemical sensors. Several techniques have been developed to form the graphene. Especially chemical vapor deposition (CVD) is a promising process for the large area graphene. For the electrically isolated devices, the graphene should be transfer to insulated substrate from Cu or Ni. However, transferred graphene has serious drawback due to remaining polymeric residue during transfer process which induces the poor device characteristics by impurity scattering and it interrupts the surface functionalization for the sensor application. In this study, we demonstrate the characteristics of solution-gated FET depending on the removal of polymeric residues. The solution-gated FET is operated by the modulation of the channel conductance by applying a gate potential from a reference electrode via the electrolyte, and it can be used as a chemical sensor. The removal process was achieved by several solvents during the transfer of CVD graphene from a copper foil to a substrate and additional annealing process with H2/Ar environments was carried out. We compare the properties of graphene by Raman spectroscopy, atomic force microscopy(AFM), and X-ray Photoelectron Spectroscopy (XPS) measurements. Effects of residual polymeric materials on the device performance of graphene FET will be discussed in detail.

• 한국재료학회지
• /
• 제28권11호
• /
• pp.627-632
• /
• 2018

Two dimensional(2D) crystals, composed of a single layer or a few atomic layers extracted from layered materials are attracting researchers' interest due to promising applications in the nanoelectromechanical systems. Worldwide researchers are preparing devices with suspended 2D materials to study their physical and electrical properties. However, during the fabrication process of 2D flakes on a target substrate, contamination occurs, which makes the measurement data less reliable. We propose a dry transfer method using poly-methyl methacrylate(PMMA) for the 2D flakes to transfer onto the targeted substrate. The PMMA is then removed from the device by an N-Methyl-2-pyrrolidone solution and a critical point dryer, which makes the suspended 2D flakes residue free. Our method provides a clean, reliable and controllable way of fabricating micrometer-sized suspended 2D nanosheets.

• 한국통신학회논문지
• /
• 제38B권9호
• /
• pp.715-721
• /
• 2013

RF소자의 소형화 기법으로는 헤리컬 구조를 적용하는 방법, Meta Material을 사용하는 방법 및 적층구조를 적용하는 방법 등 여러 방법들이 적용되고 있다. 그러나 헤리컬 구조는 한 번의 원주의 회전이 있을 때 마다 공진주파수가 생김에 따라 단일 공진주파수 특성을 가지는 RF회로의 소형화 기법에는 맞지 않으며, Meta Material과 적층구조를 적용하는 방법들은 구조가 복잡하며 비용이 많이 드는 단점이 있다. 또한, 3차원 구조의 기본적인 뫼비우스 스트립을 활용한 논문과 뫼비우스 스트립의 특성을 활용한 평판형 구조의 논문이 제안되었으나 완전한 평판형구조가 아니고, 선로결합효과(coupling effect) 현상의 문제점이 있었다. 따라서 본 논문은 기존 M$\ddot{o}$bius Strip과 위상동형인 Quasi M$\ddot{o}$bius Strip과 via hole구조를 응용함으로써, RF회로의 소형화와 선로결합효과를 완화한 안테나를 제시하였다. 본 논문의 시뮬레이션 결과에 의하면, 2.4GHz의 공진주파수 일 때, 기존의 링 안테나와 대비하여 물리적 원주의 길이는 1/3배로 소형화 되었다. 그리고 기존의 헤리컬 안테나의 다중공진특성이 아니라 단일 주파수에서의 공진특성을 보인다. 또한, 2.4GHz의 공진주파수 근처에서 선로결합 효과 현상이 거의 발생하지 않았다.