• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.4
• /
• pp.267-274
• /
• 2014

The first Low- and Intermediate-Level Waste (LILW) disposal facility with 6 silos has been constructed in granite host rock saturated with groundwater in Korea. A two-dimensional numerical modeling on gas migration was carried out using TOUGH2 with EOS5 module in the disposal facility. Laboratory-scale experiments were also performed to measure the important properties of silo concrete related with gas migration. The gas entry pressure and relative gas permeability of the concrete was determined to be $0.97{\pm}0.15bar$ and $2.44{\times}10^{-17}m^2$, respectively. The results of the numerical modeling showed that hydrogen gas generated from radioactive wastes was dissolved in groundwater and migrated to biosphere as an aqueous phase. Only a small portion of hydrogen appeared as a gas phase after 1,000 years of gas generation. The results strongly suggested that hydrogen gas does not accumulate inside the disposal facility as a gas phase. Therefore, it is expected that there would be no harmful effects on the integrity of the silo concrete due to gas generation.

• Reproductive and Developmental Biology
• /
• v.29 no.2
• /
• pp.83-91
• /
• 2005

Somatic cell nuclear transfer in cattle has limited efficiency in terms of production of live offspring due to high incidence of fetal failure after embryo transfer to recipients. Such low efficiency of cloning could possibly arise from abnormal and poorly developed placenta. In the present study the placental proteome in late pregnancy established from in vitro fertilization (IVF) and nuclear transfer (NT) was analysed. Proteome alternation was tested using two-dimensional polyacrylamide gel electrophoresis (2-DE) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI- TOF). Comparing placenta from NT embryos to those from IVF counterparts, significant changes in expression level were found in 18 proteins. Of these proteins 12 were not expressed in NT placenta but expressed in IVF counterpart, whereas the expression of the other 6 proteins was limited only in NT placenta. Among these proteins, cytokeratin 8 and vimentin are considered to be involved in regulation of post-implantation development. In particular, cytokeratin 8 and vimentin may be used as makers for placental development during pregnancy because their expression levels changed considerably in NT placental tissue compared with its IVF counterpart. Data from 2-DE suggest that protein expression was disorientated in late pregnancy from NT, but this distortion was eliminated with progression of pregnancy. These findings demonstrate abnormal placental development during late pregnancy from NT and suggest that alterations of specific placental protein expression may be involved in abnormal function of placenta.

• Journal of Distribution Science
• /
• v.14 no.5
• /
• pp.97-106
• /
• 2016

Purpose - Social commerce is a certain way of how people buy some products together with others through the internet sites with mutual interactions among customers with the benefits of SNS when buying some products. At present, China market has some problems due to its rapid growing. However, empirical research or academic approach to social commerce has not been made enough. So, it is important for Chinese social market to develop and enlarge the customers with stability under the reliability and satisfaction. Also it is important for them to have repurchase intention. Nowadays, it is necessary to find the factors on customer satisfaction and trust, whereas consumers' dissatisfaction and unreliability are increasing on social commerce recently. In addition, researches on social commerce have been actively pursued by a variety of domestic and foreign scholars. However, researches on social commerce and Chinese market are short of, and they have some limitations because of the rapid growth of the market even though it is the early stage. The current situation requires researches on consumers' repurchase intention for continuing growth in the future according to the growth of Chinese social commerce. Research design, data, and methodology - The literature and the empirical studies are combined in order to achieve the purpose of the study. Deriving social commerce features and consumer properties as factors affecting the repurchase intention through the literature, and these factors have modeled a series of assumptions about the impact on satisfaction and trust, and have established hypotheses to verify them. The survey which is conducted to test the hypothesis and questionnaires are derived based on the variables discussed in the previous study. Appropriate measures were developed and tested on 227 respondents in China with a cross-sectional questionnaire survey. The path relationships of the research model were analyzed by SPSS 23.0 and Amos 23.0. Results - Research results about social commerce characteristics and factors affecting the repurchase intention are presented to Chinese market companies that adopt business models and consumer characteristics. In addition, this study focuses on the characteristics of social commerce, from two-dimensional characteristics of the consumer satisfaction, trust and the impact on the repurchase. Therefore, social commerce features and consumer properties based on the results of this study may lead the strategic implications that may increase the repurchase intention. Conclusions - The classification reviewing the previous findings related to social commerce and social commerce features affects social commerce repurchase (price discount, interactivity) and consumer characteristics (impulsivity, innovation, collectivism). It affects repurchase on factors and analyzes empirically. The empirical results identify major characteristics (social commerce characteristics, attributes) that affect the repurchase intention, and give the practical implications as well as the business strategies that are able to enhance social commerce repurchase consumers. Social commerce is a certain way of how people buy some products together with others through the internet sites with mutual interactions among customers with the benefits of SNS when buying some products.

• Journal of Biomedical Engineering Research
• /
• v.19 no.5
• /
• pp.519-530
• /
• 1998

In this paper, the basic study on the design of the flexible keel of the energy-storage prosthetic foot was performed in order to Improve the walking performance and Increase the activities of the below knee amputees. Based on the analysis of the anthropometric data and the normal gait on two dimensional sagittal plane available In the literature, we presented a model of the basic structure of the flexible keel of the prosthetic foot. The model of the basic structure was composed of the simple beams, and linear rotational spring and damper. Laminated carbon fiber-reinforced composites were selected as the material of the basic structure model of the flexible keel In order to apply the high strength and light weight materials to the basic structure of the flexible keel of the prosthetic foot. The recoverable strain energy In response to the change of beam shape was calculated bur the finite element analysis and it was suggested that the change of beam shape could be the design variable in flexible keel design. The simulation process was systematically designed by using orthogonal array table in order to design the flexible keel structure which could store the more recoverable strain energy. finite element analysis was carried but according to the design of simulations by using the finite element program ABAQUS and the flexible keel structure of the energy-storage prosthetic foot was obtained from the analysis of variance(ANOVA). The dynamic simulation model of the prosthetic walking using the flexible keel structure was made and the dynamic analysis was carried but during one walk cycle. Based on the above results, an effective design process was presented for the development of the prosthetic fool system.

• Journal of Astronomy and Space Sciences
• /
• v.12 no.1
• /
• pp.21-29
• /
• 1995

The $\beta$ Lyrae-type eclipsing binary AW Cam was observed photoelectrically in three wavelength regions. The obtained UBV light curves of AW Cam were analyzed with two separate modes(mode 2 for detached systems and mode 5 for semi-detached ones) of the Wilson-Devinney binary mode. It is intended to resolve the discrepancy in AW Cam system that the photometrio mass ratio (q=0.21) derived by Russo and Milano (1983) is not consistent with the spectroscopic result (q=0.43) by Mammano et al.(1967). Our photomtric solutions derived with mode 2 are fitted better to the observed light curves than those of mode 5, supporting that AW Cam may be not a normal semi-detached system but a detached one. Three dimensional Roche configuration of AW Cam system calculated with the derived mass ratio (q=0.43) reveals that the less massive secondary with the confined within its inner Roche lobe, while the more massive rimary is in marginally contact. From the Roche geometry, the constancy of the orbital period and other photometric evidences of AW Cam, it is provisionally concluded that the system is an unevolved detached binary in is provisionally concluded that the system is an unevolved detached binary in the phase of case A evolution toward 'contact phase' rather than and evolved one in 'broken-contact phase' suggested by Giuricin and Mardrossian (1981).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.90-96
• /
• 2018

Tracer experiments were carried out on two laboratory modes, "without media mode" and "with media mode", to examine the hydraulic characteristics of the anaerobic fluidized bed bioreactor (AFBR). For both configurations, a formula was derived for the hydraulics and data interpretation to obtain the actual characteristics of the reactor. The dispersion model is based on the assumption that carriers are non-reacting and the dispersion coefficient is constant. The model represents the one-dimensional unsteady-state concentration distribution of the non-reacting tracer in the reactors. The experimental results showed that the media increased the mixing conditions in the reactor considerably. For the reactor without media, in the range tested, the dispersion coefficient was at least an order of magnitude smaller than that of the reactor with media. Advective transport dominates and the flow pattern approaches the plug flow reactor (PFR) regime. The dispersion coefficient increased significantly as us, the superficial liquid velocity, was increased proportionally to 0.82cm/s. On the other hand, for the reactor with media, the flow pattern was in between a PFR and a completely mixed flow reactor (CMFR) regime, and the dispersion coefficient was saturated at us=0.41cm/s, remaining relatively constant, even at us=0.82cm/s. The dispersion coefficient depends strongly on the liquid Reynolds number (Re) or the particle Reynolds number (Rep) over the range tested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.705-713
• /
• 2018

An automotive ball joint connects the suspension system to the steering system and helps to enable rotational and linear motion between the two elements for steering. This study examines a ball joint used in medium and large-sized pickup trucks. Ball joints consist of a stud, socket, bearing, and plug. The main structural performance metrics of ball joints are the pull-out strength and push-out strength. These structural parameters must meet certain criteria to avoid serious accidents. Test and simulation methods are used to investigate the design requirements, but tests are time-consuming and costly. In this study, we modeled ball joints in SolidWorks and performed a finite element analysis in Abaqus to predict structural performance. The analysis was used to obtain the structural performance required for the static analysis of a 2D axisymmetric model. The uncertainties in the manufacturing of the ball joint were assumed to be the manufacturing tolerances, and the dimensional design variables were identified through case studies. The manufacturing tolerances at each level were defined, and the results were compared with experimental results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.699-704
• /
• 2018

One-dimensional nanostructures have attracted increasing attention because of their unique electronic, optical, optoelectrical, and electrochemical properties on account of their large surface-to-volume ratio and quantum confinement effect. Vertically grown nanowires have a large surface-to-volume ratio. The vapor-liquid-solid (VLS) process has attracted considerable attention for its self-alignment capability during the growth of nanostructures. In this study, vertically aligned silicon oxide nano-pillars were grown on Si\$SiO_2$(300 nm)\Pt substrates using two-zone thermal chemical vapor deposition system via the VLS process. The morphology and crystallographic properties of the grown silicon oxide nano-pillars were investigated by field emission scanning electron microscopy and transmission electron microscopy. The diameter and length of the grown silicon oxide nano-pillars were found to be dependent on the catalyst films. The body of the silicon oxide nano-pillars exhibited an amorphous phase, which is consisted with Si and O. The head of the silicon oxide nano-pillars was a crystalline phase, which is consisted with Si, O, Pt, and Ti. The vertical alignment of the silicon oxide nano-pillars was attributed to the preferred crystalline orientation of the catalyst Pt/Ti alloy. The vertically aligned silicon oxide nano-pillars are expected to be applied as a functional nano-material.

• Journal of Korea Port Economic Association
• /
• v.29 no.4
• /
• pp.289-323
• /
• 2013

This study set out to estimate and compare benefits of damage in case of storm surge at the Masan Port by using two of the most representative methodologies used to estimate benefits in port disaster prevention facility construction, namely CVM(contingent valuation method), which estimates the values of non-market goods, and MD-FDA(multi-dimensional flood damage analysis), which had usually been implemented in flood or dam projects. The benefit estimation for 30 years of costs was 2.5689 trillion won for CVM and 2.9596 trillion won for MD-FDA, which indicates that there was no big difference in benefits among disaster prevention facilities. However, in-depth testing should follow to figure out whether MD-FDA can replace CVM, which has been tested with non-market goods, when estimating the benefits of disaster prevention facilities based on those findings.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.6
• /
• pp.2707-2711
• /
• 2014

Introduction: Smoking prevalence among the medical students is high in China. Therefore, understanding the smoking motivations of medical students is crucial for smoking control, but currently there are no scales questionnaires customized for probing the smoking motivations of medical students. This aim of study was to test and modify a questionnaire for investigating smoking motivations among medical students. Methods: A cross-sectional survey was conducted among 1,125 medical students at Xuzhou Medical College in China in 2012.The model fit and validity was assessed by confirmatory factor analysis (CFA) and the reliability was tested by single-item reliability, composite reliability, and item-total correlation. Results: The prevalence of smoking was 9.84 % among study population. In the modified scales, the global fit indices identified a CFI value of 0.96, TLI was 0.96, and the RMSEA was 0.063. CFA supported the two dimensional structure of the instrument. The average variance extracted ranged from 0.45 to 0.62. All single-item reliability scores were greater than 0.20, and the composite reliability ranged from 0.74 to 0.91. Conclusion: Modified scales could be the preliminary instrument used in evaluating the smoking motivations of medical students. However, it should be further assessed using other forms and methods of validity and reliability, additional motivations of smoking, and the survey of other medical colleges in China.