• 대한기계학회논문집B
• /
• 제23권9호
• /
• pp.1129-1138
• /
• 1999

This paper presents a systematic two-zone modeling for reliable performance prediction of centrifugal compressors. In order to improve the predictive capability, a modified jet slip factor is developed and new corrections for the wake flow deviation and mass fraction are suggested based on the comprehensive experimental data of the three Eckardt impellers. The proposed two-zone modeling is tested against nine sets of measured data of centrifugal compressors. The results are also compared with those obtained by the mean streamline analysis. It was found that the predictions by the present two-zone modeling agree fairly well with experimental data for a variety of centrifugal compressors over the wide operating conditions.

• 한국화재소방학회논문지
• /
• 제18권1호
• /
• pp.42-48
• /
• 2004

다중이용시설의 화재 시 온도분포 및 연기유동 모델링은 결정론적 모델(Deterministic Model)인 존모델 (Zone Model)과 필드모델(Field Model)이 주로 사용되고 있다. 존모델은 공간을 두개의 지역으로 구분하여 화재현상을 분석하고, 필드모델은 공간을 다수의 Cell로 구분하여 분석하고 있으나 두 모델의 비교치에 대해서는 효용성 검증에 어려움을 겪고 있다. 따라서 화재현상의 모델링에 따른 수치적 이해와 관련자료의 검증을 통하여 실 상황에 보다 근접한 새로운 모델의 개발이 요구된다. 본 논문에서는 두 모델을 복합상영관의 실내공간에 적용하여 그 효용성을 분석해본 결과 공간 평균분포도에서는 존모델이, 세부적 공간현상에서는 필드모델의 적용이 적절한 것으로 판단된다. 또한 구체적인 화재의 성상과 감지기의 위치선정, 연기제어를 위한 제연설비의 검토를 위해서는 필드모델의 활용이 더욱 효과적이다.

• 지질공학
• /
• 제26권3호
• /
• pp.325-330
• /
• 2016

현재 경주 중저준위방사성폐기물 처분장(이하 '경주방폐장')에서는 2단계 표층처분시설이 계획중에 있으며, 포화대에 위치한 1단계 처분시설과는 달리 불포화대 상부에 위치하게 된다. 단열을 포함하는 불포화대의 특성상 지하수 및 용질의 대부분이 단열을 통해 이동할 것으로 예상된다. 따라서 불포화 암반 매질에 대한 정밀한 해석을 위하여 단열망 연속체와 암반 매질 연속체를 구분하여 해석하는 TOUGH2 전산코드의 meshmaker 모듈의 MINC 기법을 활용하였다. TOUGH2 MINC 기법의 기존 국내 연구 사례가 미미하여 본 연구에서는 MINC를 이용한 mesh 구성 방법에 대한 절차를 개발하였으며, 단열 연속체와 암반매질 연속체의 k-field를 생성하였다. 이와 같이 생성된 도메인은 향후 이중 연속체를 기반으로 경주방폐장의 지하수 유동 및 오염물질 이동 등에 활용될 뿐만 아니라 단열이 발달한 암반에서 단열-암반매질 연결성을 고려한 단열망 유동 특성을 분석하는데 참고가 될 것으로 기대한다.

• 천문학회보
• /
• 제43권2호
• /
• pp.43.3-43.3
• /
• 2018

We develop a model for broadband spectral energy distribution (SED) of Pulsar Wind Nebulae (PWNe). The model assumes that electrons/positrons in the pulsar wind are injected into and stochastically accelerated in the pulsar termination shock. We consider two scenarios: a stationary one-zone case and a time-evolving multi-zone case. In the latter scenario, flow properties in the PWNe (magnetic field, bulk speed) are modeled to vary in time and space. We apply the model to the broadband SED of the pulsar wind nebula 3C 58. From the modeling, we find that a broken power-law injection is required with the maximum electron energy of ~200 TeV.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.35-41
• /
• 1995

Fracture Mechanics does work for concrete, provided that a finite nonlinear zone at fracture front is being considered. The development of model for fracture process zone is most important to describe fracture phenomena in concrete. The fracture process zone is a region ahead of a traction-free crack, in which two major mechanisms, microcracking and bridging, play important rules. The toughness due to bridging is dominant compared to toughness induced by microcracking, so that the bridging is dominant mechanism governing the fracture process of concrete. In this paper the bridging zone, which is a part of extended macrocrack with stresses transmitted by aggregates in concrete, is model led by a Dugdale-Barenblatt type model with linear tension-softening curve. Two finite element techniques are shown for the model of fracture process zone in concrete.

• Journal of Welding and Joining
• /
• 제28권2호
• /
• pp.60-65
• /
• 2010

Although two dimensional axi-symmetric modeling is useful for calculating the residual stresses of a cylindrical weldment such as a core barrel, this conventional axi-symmetric modeling can not express the behavior of shrinkage well in the locally heated weld zone. New technique of two dimensional axi-symmetric modeling using a virtual fixture is suggested to simulate the behavior of dimensional changes in the weld zone during the heating period of the welding. The virtual fixture in the model has a role to restrain the expansion of the high temperature heated region, which simulates equivalent intrinsic restraint effect of the weldment. In the restraint condition of the virtual fixture above the critical yield strength, the calculated shrinkages by using the suggested axi-symmetric model agreed well with those measured in a welded mock-up. The calculated residual stresses by using the suggested axi-symmetric model also agreed well with those calculated by using conventional axi-symmetric model which has beenused for calculating residual stresses in the weldment.

• ETRI Journal
• /
• 제40권6호
• /
• pp.736-744
• /
• 2018

This study considers zone-based registration (ZBR), which is adopted by most mobile cellular networks. In ZBR, a user equipment (UE) registers its location area (or zone) in a network database (DB) whenever it enters a new zone. Even though ZBR is implemented in most networks for a UE to keep only one zone (1ZR), it is also possible for a UE to keep multiple zones. Therefore, a ZBR with two zones (2ZR) is investigated, and some mathematical models for 2ZR are presented. With respect to ZBR with three zones (3ZR), several studies have been reported, but these employed computer simulations owing to the complexity of the cases, and there have been no reports on a mathematical 3ZR model to analyze its performance. In this study, we propose a new mathematical model for 3ZR for the first time, and analyze the performance of 3ZR using this model. The numerical results for various scenarios show that, as the UE frequently enters zones, the proposed 3ZR model outperforms 1ZR and 2ZR. Our results help determine the optimal number of zones that a UE keeps, and minimize the signaling cost for radio channels in mobile cellular networks.

• Macromolecular Research
• /
• 제12권2호
• /
• pp.206-212
• /
• 2004

To provide guidelines and a basic understanding of static and continuous zone drawing processes, we propose two different mathematical models in terms of the processing conditions and material parameters. Although the models are not finely tuned, because of assumptions made, they are still useful for the analysis of the process and for predicting the processibility.

• 지질공학
• /
• 제26권1호
• /
• pp.87-99
• /
• 2016

본 연구에서는 단열을 포함하는 불포화 암반에서의 지하수 유동 흐름을 예측하기 위한 2차원 수치 모델링을 수행하였다. 특히, 불연속 단열망 모델링(Dscrete Fractured Network, DFN)을 통하여 도출된 투수계수의 분포를 나타내는 k-field를 모델링 입력변수로 적용하였다. 투수계수 차이는 불포화대에서 지하수의 이동속도 차이를 야기시키는 중요한 인자로 적용되었다. 연구지역의 지표 토양층으로부터 지하 대수층까지의 불포화대 깊이를 적용하여 지하수 유동 모델링의 초기조건을 실제와 유사하게 설정하였다. 강우의 지표 침투율은 인공구조물과 자연 토양층의 침투율 차이를 적용하여 실제 불포화 암반을 거쳐서 포화대까지 지하수의 이동흐름을 해석하고 시각화하였다. 특히, 오염물질의 이동 시작점이 될 수 있는 인공구조물의 하부에 모니터링 지점을 설정하여 실제 오염물질원이 지하수에 용해되어 불포화대를 이동할 때의 경로를 예측 하였으며 중력방향인 직하부로 이동하는 것을 확인되었다.

• Ocean Systems Engineering
• /
• 제2권1호
• /
• pp.33-47
• /
• 2012

This study revealed the behavior of droplets formed through leak process in deep water. There was a threshold depth named the universal attraction depth (UAD). Droplets rose upward in the zone below the UAD called the rising zone, and settled down in the zone above the UAD called the settling zone. Three mass loss modes were identified and formulated: dissolution induced by mass transfer, condensation by heat transfer and phase separation by pressure decrease. The first two were active for the settling zone, and all the three were effective for the rising zone. In consequence, the life time of the droplets in the rising zone was far shorter than that of the droplets in the settling zone.