• Tribology and Lubricants
• /
• 제32권3호
• /
• pp.101-105
• /
• 2016

Trap effect of groove is evaluated in a lubricating system using computational fluid dynamics (CFD) analysis. The simulation is based on the standard k-ε turbulence model and the discrete phase model (DPM) using a commercial CFD code FLUENT. The simulation results are also capable of showing the particle trajectories in flow field. Computational domain is meshed using the GAMBIT pre-processor. The various grooves are applied in order to improve lubrication characteristics such as reduction of friction loss, increase in load carrying capacity, and trapping of the wear particles. Trap effect of groove is investigated with variations in cross-sectional shape and Reynolds number in this research. Various cross-sectional shapes of groove (rectangular, triangle, U shaped, trapezoid, elliptical shapes) are considered to evaluate the trap effect in simplified two-dimensional sliding bearing. The particles are assumed to steel, and defined a single particle injection condition in various positions. The “reflect” boundary condition for discrete phase is applied to the wall boundary, and the “escape” boundary condition to “pressure inlet” and “pressure outlet” conditions. The streamlines are compared with particles trajectories in the groove. From the results of numerical analysis in the study, it is found that the cross-sectional shapes favorable to the creation of vortex and small eddy current are effective in terms of particle trapping effect. Moreover, it is found that the Reynolds number has a strong influence on the pattern of vortex or small eddy current in the groove, and that the pattern of the vortex or small eddy current affects the trap effect of the groove.

• 상하수도학회지
• /
• 제27권2호
• /
• pp.261-272
• /
• 2013

Algae boom (Red tide) in south coastal area of Korea has been appeared several times during a decade. If algae boom appears in the desalination plant, media filter and UF filter are clogged quickly, and the plant should be shutdown. In general, Algae can be removed from water by flotation better than by sedimentation, because of the low density of algal cell. The purpose of this study conducts the CFD simulation of DAF flotation basin to apply the design of the dissolved air flotation with ball filter in the Test Bed for SWRO desalination plant. In this study, Eulerian-Eulerian multiphase model was applied to simulate the behavior of air bubbles and seawater. Density difference model and gravity were used. But de-sludge process and mass transfer between air bubbles and seawater were ignored. Main parameter is hydraulic loading rate which is varied from 20 m/hr to 27.5 m/hr. Geometry of flotation basin were changed to improve the DAF performance. According to the result of this study, the increase of hydraulic loading rate causes that the flow in the separation basin is widely affected and the concentration of air is increased. The flow pattern in the contact zone of flotation basin is greatly affected by the location of nozzle header. When the nozzle header was installed not the bottom of the contact zone but the above, the opportunity of contact between influent and recycle flow was increased.

• Nuclear Engineering and Technology
• /
• 제32권2호
• /
• pp.128-141
• /
• 2000

The critical heat flux (CHF）experiments have been carried out in a wide range of pressures for an internally heated vertical annulus. The experimental conditions covered ranges of pressures from 0.57 to 15.01 MPa, mass fluxes of 0 kg/$m^2$s and from 200 to 650 kg/$m^2$s, and inlet subcoolings from 85 to 413 kJ/kg. The characteristics of the present data and the effect of pressure on CHF are discussed. Most of the CHFs were identified to dryout of the liquid film in the annular or annular-mist flow. For the mass flux of 200 kg/$m^2$s, there were the indications that the CHF occurred at the transition from annular to annular-mist How in the pressure range of 3~10 MPa. For the mass fluxes of 550 and 650 kg/$m^2$s, the CHFs had a maximum value at a pressure of 2~3 MPa, and the pressure at the maximum CHF values had a trend moving toward the pressure at the peak value of pool boiling CHF as the mass flux decreased. The CHF data under a zero mass flux condition indicate that both the effects of pressure and inlet subcooling on the CHF were smaller, compared with those on the CHF with net water upward flow.

• 한국정밀공학회지
• /
• 제26권11호
• /
• pp.55-61
• /
• 2009

The wall thinning defect of nuclear power pipe is mainly occurred by the affect of the flow accelerated corrosion (FAC) of fluid. This type of defect becomes the cause of damage or destruction of in carbon steel pipes. Therefore, it is very important to measure defect which is existed not only on the welding part but also on the whole field of pipe. This study use dual-beam Shearography, which can measure the out-of-plane deformation and the in-plane deformation by using another illuminated laser beam and simple image processing technique. And this study proposes Infrared thermography, which is a two-dimensional non-contact nondestructive evaluation that can detect internal defects from the thermal distribution by the inspection of infrared light radiated from the object surface. In this paper, defect of nuclear power pipe were, measured using dual-beam shearography and infrared thermography, quantitatively evaluated by the analysis of phase map and thermal image pattern.

• 한국식품영양학회지
• /
• 제27권3호
• /
• pp.532-537
• /
• 2014

황백(Cortex Phellodendri: CP)은 황벽나무(Phellodendron amurense)의 건조된 수피로부터 얻어진다. 이 수피는 한국의 전통 한약제로서 설사, 황달, 무릎과 발의 통증, 요도관 및 피부 감염증에 폭넓게 사용되어 왔다. 이들 기능성 성분의 분리 및 정제는 박층 크로마토크래피, 컬럼 액체 크로마토크래피 및 HPLC와 같은 여러 분석법들이 동양의 약초연구에 이용되어 왔다. 본 연구는 CP로부터 berberine을 분리하기 위해 향류분배 크로마토크래피법(CPC)으로 효과적으로 수행하였다. 두 용매의 CPC 최적조성은 n-butanol: acetic acid: water(4:1:5 v/v/v)이었다. 이동상의 유속은 1,000 rpm 회전력에서 상승법으로 분당 3 mL 속도로 전개시켰다. CPC에서 분리된 분획분은 prep-HPLC로 정제하였다. $^1H$-NMR 스펙트럼은 4.10과 4.20 ppm에서 $3H(-OCH_3)$, 6.10 ppm에서 2H의 ($-OCH_2O-$) proton signal의 공명이 관찰되었다. 2개의 방향족 proton은 이중결합 패턴을 보였다. H-11과 H-12 doublet은 각각 7.98과 8.11에서 나타났다. $^{13}C$-NMR 스펙트럼에서는 C2와 C3의 methylenedioxy group($-OCH_2O-$), C9과 C10에 methoxy group($-OCH_3$)이 4개의 치환된 형태로 보였다. 분리 정제된 berberine의 화학구조는 $^1H$, $^{13}C$-NMR, ESI-MS 데이터 분석으로 확인하였다.

• Wind and Structures
• /
• 제15권6호
• /
• pp.531-553
• /
• 2012

Many tall buildings possess through-building gaps at middle levels of the building elevation. Some of these floors are used as sky gardens, or refuge floors, through which wind can flow with limited blockage. It has been reported in the literature that through-building gaps can be effective in reducing across-wind excitation of tall buildings. This paper systematically examines the effectiveness of two configurations of a through-building gap, at the mid-height of a tall building, in reducing the wind-induced dynamic responses of the building. The two configurations differ in the pattern of through-building opening on the gap floor, one with opening through the central portion of the floor and the other with opening on the perimeter of the floor around a central core. Wind forces and moments on the building models were measured with a high-frequency force balance from which dynamic building responses were computed. The results show that both configurations of a through-building gap are effective in reducing the across-wind excitation with the one with opening around the perimeter of the floor being significantly more effective. Wind pressures were measured on the building faces with electronic pressure scanners to help understand the generation of wind excitation loading. The data suggest that the through-building gap reduces the fluctuating across-wind forces through a disturbance of the coherence and phase-alignment of vortex excitation.

• Natural Product Sciences
• /
• 제22권3호
• /
• pp.162-167
• /
• 2016

Peucedani Radix is the root of Angelica decursiva Franchet et Savatier (=Peucedanum decursivum Maximowicz) or Peucedanum praeruptorum Dunn in several Asian countries. The coumarins contained in Peucedani Radix were quantitatively analyzed using HPLC-DAD to develop a simultaneous determination for the quality control of A. decursiva and P. praeruptorum. For quantitative analysis, four major coumarins contained in these medicinal plants were assessed. Nodakenin (1), nodakenetin (2), praeruptorin A (3), and praeruptorin B (4) were separated with a Phenomenex Luna C18 column ($5{\mu}m$, $4.6{\times}250mm$) under the gradient conditions using distilled water with 0.1% phosphoric acid and acetonitrile with 0.1% phosphoric acid as the mobile phase, at a flow rate of 1.0 ml/min and a detection wavelength of 330 nm. This method was fully validated for linearity, accuracy, precision, recovery, and limit of detection and quantification. As a result, A. decursiva and P. praeruptorum were clearly classified by the quantification of four major coumarins in extracts. Also, the pattern recognition analysis based on HPLC indicates that all of the samples were largely clustered into two groups. Therefore, it is possible to distinguish between A. decursiva and P. praeruptorum and contribute to quality control.

• 멤브레인
• /
• 제27권1호
• /
• pp.43-52
• /
• 2017

분리막 오염을 감소시키고 투과유속 향상을 위하여 관형분리막 모듈 내에 공기 분사노즐관을 삽입시켰다. 분리막의 평균 기공크기는 $0.1\;{\mu}m$이며 이스트를 오염물질로 사용하였다. 모든 투과실험은 노즐관을 모듈에 장착하고 공기를 주입하지 않는 실험을 먼저 실시하고 연속해서 공기를 주입하는 투과실험을 하였다. 그 다음 노즐관을 제거한 후 공기를 주입시키지 않으면서 투과유속을 측정하였다. 측정된 투과유속은 공기주입 효과를 분석하기 위하여 비교하였다. 공기주입에 대한 투과유속은 거의 일정하거나 증가하였다. 노즐관이 장착되고 공기 주입을 하지 않을 경우의 투과유속이 빈 관형 모듈의 경우보다 높았다. 운전압력을 0.4 bar까지 감소시키면 노즐관이 장착되지 않는 경우와 비교하여 공기를 주입할 경우 투과유속이 21%까지 향상되었다. 기체량이 증가하여 기/액체 2상 흐름이 stratified-smooth에서 intermittent 상태로 변화됨에 따라서 공기 주입에 의한 투과유속은 30% 이상으로 증가하였다.

• 한국수소및신에너지학회논문집
• /
• 제11권3호
• /
• pp.119-125
• /
• 2000

가시광선을 이용하여 수용액 상태의 황화수소부터 수소를 제조하기 위해 사용되는 CdS 입자막전극의 광효율 개선과 광안정성 향상을 위해 막전극을 표면처리하였다. CdS 입자막 전극에 사용되는 CdS 입자는 $Cd{NO_3}{\cdot}9H_2O$와 $Na_2S{\cdot}4H_2O$의 혼합 침전법에 의해 제조하였다. 입자 결정상을 제어하기 위해 고압반응기에서 온도를 바꿔가며 12시간 동안 수열처리하였다. 이렇게 제조된 CdS 졸을 이용하여 캐스팅법으로 막전극을 제조하였으며, $TiCl_4$ 수용액을 사용하여 후처리 하였다. CdS 입자의 결정상은 XRD pattern으로 확인하였고, 평균 일차입자크기는 XRD pattern과 Scherrer 식에 의해 계산하였다. 입자 형상과 막 표면 형태는 SEM으로 관찰하였다. 수소 발생은 Xe램프가 장착된 연속흐름 광반응 장치를 이용하여 광전기화학적 방법과 광화학적 방법으로 각각 측정하였다. $TiCl_4$로 표면처리한 막전극의 광전류는 처리하지 않았을 때 보다 평균 2배가량 증가한 $4.0mA/cm^2$ 정도를 나타내었다. 수소발생량도 $2.4{\times}10^4mol/hr$ 정도로서 처리하지 않았을 때 보다 크게 증가하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제12권4호
• /
• pp.60-71
• /
• 2007

제주도의 관정 지하수에 대해 2개월 간격으로 1년 동안 수행한 주기 조사에서 주요 양이온, $SiO_2$ 등은 10% 이내의 변동폭을 보여 계절적인 수질 변화가 크지 않음을 지시하였지만, $NO_3$, 용존 산소 (DO) 등은 비교적 큰 변동을 보였다. DO 변동 수준은 산화-환원 환경이 변화하는 수준은 아니었다. $NO_3$는 동일한 계절적인 변동 경향을 보여주지는 않지만 상당수 관정에서 10% 이상(최대 35%)의 변동폭을 보였다. CFCs를 이용하여 결정한 지하수 연령은 15-25년 내외의 연령을 가지는 지하수 관정들에서 10월에 일시적으로 5년 정도 감소하는 경향을 보이는데, 이는 여름 철 강수에 의해 함양되는 지하수가 기저 지하수에 지연되어 도달하여 기저 지하수의 연령을 감소시키기 때문인 것으로 보인다. 기온과 비교하여 변동폭은 월등히 작지만 위상차가 없는 지하수 온도 변동 특성은 강수에서 유래되는 유입수에 의해 온도 변화가 거의 없는 기저 지하수가 함양되는 모형으로 설명될 수 있다. 지하수의 CFC 연령과 지하수 온도의 비교적 작은 연간 변동폭은 대수층 저류량 면에서 빠른 경로를 통해 유입되는 지하수 함양이 기저 지하수에서 차지하는 비중이 작음을 지시한다.