• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.59.4-59
• /
• 2001

In this paper, wireless interface of the motion between human and robot is implemented. The idea is that if a human who is equiped with device including accelerometer and rate-gyro sensor move his/her arm, then the robot follows human motion. The robot is designed as wheeled type mobile robot with two link arms. The robot´s basic movements such as forward, backward, left, right movement can be controlled from foot sensor which human steps on. Arm movements can be controlled by arm motion of human motion. In order to detect human motion, sensor data analysis from gyro and accelerometer has to be done. Data from sensors are transferred through wireless communication to activate the robot.

• 제어로봇시스템학회논문지
• /
• 제7권9호
• /
• pp.774-782
• /
• 2001

In this paper, we propose a new approach to the autonomous and high-speed indoor navigation of wheeled mobile robots using hybrid system controller. The hierarchical structure of hybrid system presented consists of high-level reasoning process and the low-level motion control process and the environmental interaction. In a discrete event system, the discrete states are defined by the user-defined constraints and the reference motion commands are specified in the abstracted motions. The hybrid control system applied for the nonholonomic mobile robots can combine the motion planning and autonomous navigation with obstacle avoidance in the indoor navigation problem. For the evaluation of the proposed algorithm, the algorithm is implemented to the two-wheel driven mobile robot system. The experimental results show that the hybrid system approach is an effective method for the autonomous navigation in indoor environments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2424-2426
• /
• 2002

This paper proposes an adaptive control method of partially known system and shows its application result to control for two-wheeled WMR. The controlled system is stable in the sense of Lyapunov stability. To design a tracking controller for welding path reference, an error configuration is defined and the controller is designed to drive the error to zero as fast as desired. Moments of inertia of system are considered to be unknown system parameters. Their values are estimated using update laws in adaptive control scheme. The effectiveness of the proposed controller is shown through simulation results.

• 대한기계학회논문집A
• /
• 제34권8호
• /
• pp.971-980
• /
• 2010

이 논문은 모바일 로봇이 고정 장애물 또는 움직이는 장애물이 존재하는 환경에서 장애물을 회피하며 운행될 수 있는 제어 알고리즘을 연구하였다. 이 제어 알고리즘은 $D^*$ 알고리즘과, 충돌 위험도 퍼지로직, 이동로봇의 행동결정 퍼지로직을 사용하여 전역경로계획과 지역경로계획을 수행한다. $D^*$ 알고리즘에는 로봇이 이동하는 2 차원 공간을 정방형 격자 분활하여 적용한다. 이 알고리즘은 파이썬 프로그래밍 언어와 이동로봇의 운동방정식을 사용한 시뮬레이션을 통해 검증하였다. 시뮬레이션 결과를 통해 알고리즘을 적용하여 로봇이 이동하는 장애물을 피하거나 모르는 고정 장애물을 피하면서 원하는 위치로 이동하는 것을 볼 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1777-1778
• /
• 2007

In this paper, We design and implement a humanoid robot, With Educational purpose, which can collaborate and communicate with human. We present an affective human-robot communication system for a humanoid robot, D2, which we designed to communicate with a human through dialogue. D2 communicates with humans by understanding and expressing emotion using facial expressions, voice, gestures and posture. Interaction between a human and a robot is made possible through our affective communication framework. The framework enables a robot to catch the emotional status of the user and to respond appropriately. As a result, the robot can engage in a natural dialogue with a human. According to the aim to be interacted with a human for voice, gestures and posture, the developed Educational humanoid robot consists of upper body, two arms, wheeled mobile platform and control hardware including vision and speech capability and various control boards such as motion control boards, signal processing board proceeding several types of sensors. Using the Educational humanoid robot D2, we have presented the successful demonstrations which consist of manipulation task with two arms, tracking objects using the vision system, and communication with human by the emotional interface, the synthesized speeches, and the recognition of speech commands.

• 제어로봇시스템학회논문지
• /
• 제18권5호
• /
• pp.487-495
• /
• 2012

In this paper, a Smart Home Service Robot, McBot II, which performs mess-cleanup function etc. in house, is designed much more optimally than other service robots. It is newly developed in much more practical system than McBot I which we had developed two years ago. One characteristic attribute of mobile platforms equipped with a set of dependent wheels is their omni- directionality and the ability to realize complex translational and rotational trajectories for agile navigation in door. An accurate coordination of steering angle and spinning rate of each wheel is necessary for a consistent motion. This paper develops trajectory controller of 3-wheels omni-directional mobile robot using fuzzy azimuth estimator. A specialized anthropomorphic robot manipulator which can be attached to the housemaid robot McBot II, is developed in this paper. This built-in type manipulator consists of both arms with 4 DOF (Degree of Freedom) each and both hands with 3 DOF each. The robotic arm is optimally designed to satisfy both the minimum mechanical size and the maximum workspace. Minimum mass and length are required for the built-in cooperated-arms system. But that makes the workspace so small. This paper proposes optimal design method to overcome the problem by using neck joint to move the arms horizontally forward/backward and waist joint to move them vertically up/down. The robotic hand, which has two fingers and a thumb, is also optimally designed in task-based concept. Finally, the good performance of the developed McBot II is confirmed through live tests of the mess-cleanup task.

• 대한기계학회논문집A
• /
• 제40권8호
• /
• pp.703-710
• /
• 2016

로보틱스 연구에서, 모바일 로봇의 모션 제어를 위해서는 로봇의 실제 위치를 정확히 추정하는 것이 중요하다. 이를 위해 본 연구에서는, 두 개의 서로 다른 센서 데이터를 칼만필터로 융합하여 로봇의 위치인식을 개선하는 연구를 진행한다. 칼만필터로 융합한 두 개의 센서 측정값은 카메라 영상으로부터 측정된 모바일 로봇의 전역(global) 위치 좌표(x, y)값과 모바일 로봇 바퀴에 부착된 엔코더로부터 측정된 로봇의 직선 및 각속도 값이다. 다음으로 칼만필터로부터 계산된 모바일 로봇의 위치값을 모바일 로봇의 자세 안정화에 피드백하여 모션 제어의 퍼포먼스를 향상시켰다. 최종적으로 논문에서 제안한 센서융합 위치인식 기술과 모션제어기를 실제 로봇에 적용하여 실험적으로 검증하였다. 또한 모션제어에 단일 센서를 피드백으로 사용한 경우와 칼만필터로 융합한 위치 값을 사용한 경우를 비교하므로 칼만필터 기반 센서 융합 기술을 사용한 경우의 퍼포먼스 향상을 확인하였다.

• 제어로봇시스템학회논문지
• /
• 제21권5호
• /
• pp.471-476
• /
• 2015

This paper presents a maximum velocity trajectory planning algorithm for differential mobile robots with wheel velocity constraint to cope with physical limits in the joint space for two-wheeled mobile robots (TMR). In previous research, the convolution operator was able to generate a central velocity that deals with the physical constraints of a mobile robot while considering the heading angles along a smooth curve in terms of time-dependent parameter. However, the velocity could not track the predefined path. An algorithm is proposed to compensate an error that occurs between the actual and driven distance by the velocity of the center of a TMR within a sampling time. The velocity commands in Cartesian space are also converted to actuator commands to drive two wheels. In the case that the actuator commands exceed the maximum velocity the trajectory is redeveloped with the compensated center velocity. The new center velocity is obtained according to the curvature of the path to provide a maximum allowable velocity meaning a time-optimal trajectory. The effectiveness of the algorithm is shown through numerical examples.

• Journal of Mechanical Science and Technology
• /
• 제19권9호
• /
• pp.1720-1730
• /
• 2005

Automatic guided vehicle in the factory has an important role to advance the flexible manufacturing system. In this paper, we propose a novel object-transportation control algorithm of cooperative AGV systems to apply decentralized control to multiple AGV systems. Each AGV system is under nonholonomic constraints and conveys a common object-transportation in a horizontal plain. Moreover it is shown that cooperative robot systems ensure stability and the velocities of augmented systems convergence to a scaled multiple of each desired velocity field for cooperative AGV systems. Finally, the application of proposed virtual passivity-based decentralized control algorithm via system augmentation is applied to trace a circle. Finally, the simulation and experimental results for the object-transportation by two AGV systems illustrates the validity of the proposed virtual-passivity decentralized control algorithm.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권1호
• /
• pp.31-37
• /
• 2003

A robust tracking control for nonholonomic dynamic systems is proposed in this paper. Since nonholonomic dynamic systems have constraints imposed on motions that are not integrable, i.e., the constraints cannot be written as time derivatives of some functions of generalized coordinates, advanced techniques are needed for their control. It is shown that if the state of nonholonomic systems is mapped into a bounded space by a coordinate transformation, a robust controller for dynamic models of nonholonomic systems with input disturbances can be designed using sliding mode control. Stability and robustness of the proposed controller are proved in the Lyapunov sense. Numerical simulations on the trajectory tracking of a two-wheeled mobile robot are conducted to validate the effectiveness of the proposed controller.