• Membrane Journal
• /
• v.33 no.6
• /
• pp.344-351
• /
• 2023

The membrane separation process for carbon dioxide capture from hydrogen reformer exhaust gas has been developed. Using a commercial membrane module, a multi-stage process was developed to achieve 90% of carbon dioxide purity and 90% of recovery rate for ternary mixed gas. Even if a membrane module with being well-known properties such as material selectivity and permeability, the process performance of purity and recovery widely varies depending on the stage-cut, the pressure at feed and permeate side. In this study, we verify the limits of capture efficiency at single-stage membrane process under various operating conditions and optimized the two-stage recovery process to simultaneously achieve high purity and recovery rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.1
• /
• pp.241-250
• /
• 1996

In this work, an improved architecture of two-dimensional digital filter(2D DF) is suggested, and then the filter is simulated by C, VHDL language and related layouts are designed by Berkeley CAD tools. The 2D DF consists of one-dimensional digital filters and delay lines. For one-dimensional digital filter(1D DF) case, once filter coefficients are represented by canonical signed digit formats, multiplications are exected by hardwired-shifting methods. The related bit numbers are handled to prevent picture quality degradation and pipelined adder architectures are adopted in each tap and output stage to speed up the filter. For delay line case, line-sharing DRAM is adopted to improve power dissipation and speed. The filter layout is designed by semi/full custom methods considering regularity and speed improvement, and normal operation is confirmed by simulation.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.2
• /
• pp.127-129
• /
• 2007

Two unusual cases of traumatic spondyloptosis of the cervical spine at the C7-T1 level are reported. One patient was treated with a single-stage combined anterior-posterior and anterior operation to achieve realignment of the cervical spondyloptosis, decompression of the spinal cord and keep of a three-column stabilization of the spine. The other patient was treated with conservative management that consisted of a rigid neck collar and pain control for two months. The patients were managed successfully and both had good neurological outcomes. We present here a summary of the clinical presentations, the surgical technique and results, and a review of the relevant literature.

• Journal of the Korean Society of Combustion
• /
• v.13 no.3
• /
• pp.33-40
• /
• 2008

Two- and Three- dimensional numerical simulations are carried out to understand the combustion characteristics of LNG-fueled gas turbine combustor for power generation using imported and domestic natural gases. Reacting flow characteristics of the swirl stabilized natural gas combustor were understood from the numerical results with the flow conditions selected from the gas turbine operation data. The thermal influences of different natural gases were very small and the fuel composition and flow rate were considered to be tuned well. The flow structures of the recirculation and combustion region was understood from the comparison of the two- and three-dimensional results. The complexity of the three-dimensional swirl flows inside the gas turbine combustor with multiple swirlers was understood those resulting from the interactions of the stage and pilot burners.

• Advances in Traditional Medicine
• /
• v.10 no.4
• /
• pp.231-238
• /
• 2010

Sterile Products may be broadly classified into two main categories, according to the manner in which they are produced: those which are sterilized after the product has been filled and sealed in the final container(s) ("terminally sterilized" products) and those where the sterilization stage (or stages) takes place is it before or after the bulk product filled in to final container. In this latter instance, all subsequent processing (typically, the filling and sealing operations) must be conducted aseptically in order to prevent recontamination of the sterilized product. The two most common pharmaceutical applications of aseptic processing methods are (a) the filling of liquid products following sterilization by filtration and (b) the filling of previously sterilized bulk powder products. An aseptic processing operation should be tested using a microbiological growth medium (media fill) during lyophilized injection formulation, filling, loading, lyophilisation, stoppering, and unloading activities.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.1
• /
• pp.59-73
• /
• 1997

This papaer analyzes a system with consists of two workstations that are separated by finite buffer storage. In this system, we assume that the processing time in each station in a random variable and each station is not vulnerable to failure. To control the in-process inventory in the serial production system we use the (R, r) policy which is similar to the (s, S) policy in the inventory theory. Under the (R, r) policy the preceding station is forced down when the inventory level in the buffer reaches R and starts operation again when the inventory level falls to r. For the model developed, we analyze the system characteristics and the system performances.

• Archives of Plastic Surgery
• /
• v.47 no.2
• /
• pp.182-186
• /
• 2020

We report our experience of treating two patients with ankle amputation with different presentations. The first case was a clean-cut sharp amputation. The second case was an avulsion injury following a motor vehicle accident in a patient who arrived 8 hours after the injury. Replantation was successful in both cases. In avulsion injuries, a secondary operation for wound coverage is required at a later stage. With good strategy and a support team, encouraging limb survival outcomes are possible post-replantation.

• 연구논문집
• /
• s.31
• /
• pp.53-63
• /
• 2001

Numerical investigation based on the control-volume using finite-difference method has been made by the development of computer program in order to figure out the pattern of the flow field inside screw decanter. The typical flow pattern inside screw decanter is characterized by the two strong recirculation zones separated by the main stream from slurry discharge hole to exit. These recirculation regions and flow pattern are strongly influenced by the centrifugal force and the change of the value of slurry viscosities, that is,500, 1,000 and 3,000cp respectively. The wear of screw decanter appeared experimentally in two spots; one is near the circumferential area of the slurry discharge hole and the other is on the decanter blades at a certain height from the bottom to a different degree after the continuous long-term operation. These wears are partly explained by the flow pattern and the strong turbulence intensity near the recirculation attachment region.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.11
• /
• pp.49-60
• /
• 2015

Open-water sediment disposal has many applications in costal construction. Dumping of sediment in open water can be divided into descending stage under water and sedimentation stage on the seabed, and retained rate is evaluated from analyzed results of these two successive stages. Descending particle cloud have two distinct thermal and swam phase, and trajectory equations for each phase are derived to describe settling velocity and radius of particle cloud. For sedimentation stage, a numerical simulator is used to calculate growth factors for particle fiction angle and current velocity. Retained rate is defined as a mass rate of remained sediment inside the circle which has a center at dumping point on the sea level and user-defined effective radius. Retained rate map for Singapore coast is presented with water depth of 20 m, current velocity of 0.0~1.5 m/s, and effective radius of 5 m. It will decrease sediment mass loss during disposal operation and minimize surrounding environmental pollution.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.994-1002
• /
• 2019

In this paper, we propose the development of a power conversion system for electric power take-off (e-PTO) of agricultural electric vehicles. Most e-PTOs use commercial power $220V_{AC}$. A bidirectional power conversion system having a two-stage structure consisting of a DC-DC converter and a DC-AC inverter for supplying a high output voltage using a low battery voltage of an agricultural electric vehicle is suitable. we propose a power conversion system consisting of the one-stage dual active bridge (DAB) converter and the two-stage bidirectional full bridge inverter. In addition, we propose a soft start algorithm for reducing the inrush current generated by the link capacitor charging during the initial operation. A 3kW prototype system and its corresponding algorithms have been implemented to verify its effectiveness through experiments.