• 제목/요약/키워드: Two layer

검색결과 6,145건 처리시간 0.036초

중간 광전극에 삽입된 산란층에 의한 염료감응 태양전지의 광수집 성능 향상 (Enhancement of the Light Harvesting of Dye-sensitized Solar Cell by Inserting Scattering Layer)

  • 남정규;김범성;이재성
    • 한국분말재료학회지
    • /
    • 제16권5호
    • /
    • pp.305-309
    • /
    • 2009
  • The effect of light scattering layers (400 nm, TiO$_2$ particle) of 4 $\mu$m thickness on the dye-sensitized solar cell has been investigated with a 12 $\mu$m thickness of photo-anode (20 nm, TiO$_2$ particle). Two different structures of scattering layers (separated and back) were applied to investigate the light transmitting behaviors and solar cell properties. The light transmittance and cell efficiency significantly improved with inserting scattering layers. The back scattering layer structure had more effective transmitting behavior, but separated scattering layer (center: 2 $\mu$m, back: 2 $\mu$m) structure (9.83% of efficiency) showing higher efficiency (0.6%), short circuit current density (0.26 mA/cm$^2$) and fill factor (0.02). The inserting separating two scattering layers improved the light harvesting, and relatively thin back scattering layer (2 $\mu$m of thickness) minimized interruption of ion diffusion in liquid electrolyte.

Taper형 초음파 진동자의 대역폭 개선에 관한 연구 (A Astudy on Bandwidth Enhancement of a Ultrasonic Transducer with a Taper)

  • 정봉규
    • 수산해양기술연구
    • /
    • 제35권3호
    • /
    • pp.312-322
    • /
    • 1999
  • A ultrasonic transduce with a single acoustic matching layer has been designed as an attempt to increase the bandwidth of underwater transducer. The wideband resonance condition was accomplished by attaching a single matching layer on the front face of a ceramic resonator composed of a piezoelectric bar, a taper part and a head part. A modified Mason's model was used for the performance analysis and the design of transducers, and the constructed transducers were tested experimentally and numerically by changing the impedance and thickness of the matching layer in the water tank.The obtained results are summarized as follows:1. Measured resonant and antiresonant frequencies of the piezoelectric transducer with no matching layer in air were 24.7 kHz and 25.6 kHz, respectively. 2. Two resonant frequencies of the piezoelectric transducer with a single matching layer were 21.7 kHx and 26.9 kHz, respectively, in air and 21.4 kHz and 22.7 kHz, respectively, with a water load.3. Two distinct resonance peaks in the transmitting voltage response(TVR) of the developed transducer were observed at 22.0 kHz and 25.8 kHz, respectively, with center frequency of 24.0 kHz. The values of TVR at these frequencies were 130.1 dB re $1 \muPa$/V at 22.0 kHz and 128.5 dB re $1 \muPa$/V at 25.8 kHz, respectively.Reasonable agreement between the experimental results and the numerical values was achieved.

  • PDF

점탄성재 삽입시 볼트랩 죠인트의 동특성 해석 (An Analysis of Dynamic Characteristics of Bolted Lap Joints with Viscoelastic Layers)

  • 박명균;박세만;최영식;박상규
    • 한국정밀공학회지
    • /
    • 제20권1호
    • /
    • pp.172-178
    • /
    • 2003
  • Two types of bolted lap joints, one with a viscoelastic layer and the other without the viscoelastic layer were chosen to analyze the dynamic characteristics of the joints with the mechanical properties of the bolts in the joints are considered as computational variables. The finite element method was used along with the modal testing to verify the PEM model. The results in the bolted lap joints reveal that the higher the Young's modulus for the bolts we use the higher the natural frequencies we obtain fur the joints. However, the natural frequency differences in the first and second mode are not substantial but become noticeable in the higher modes. Lower natural frequencies were obtained for the bolted lap joints with the viscoelastic layer when compared with those of the bolted lap joints without the viscoelastic layer. And the differences in the natural frequencies for the two types of joints are relatively small in the first and second mode whereas in the higher mode the differences become significant. The loss factors were observed to be significant especially in the second mode for the bolted lap joints with the viscoelastic layer.

Prediction models of the shear modulus of normal or frozen soil-rock mixtures

  • Zhou, Zhong;Yang, Hao;Xing, Kai;Gao, Wenyuan
    • Geomechanics and Engineering
    • /
    • 제15권2호
    • /
    • pp.783-791
    • /
    • 2018
  • In consideration of the mesoscopic structure of soil-rock mixtures in which the rock aggregates are wrapped by soil at normal temperatures, a two-layer embedded model of single-inclusion composite material was built to calculate the shear modulus of soil-rock mixtures. At a freezing temperature, an interface ice interlayer was placed between the soil and rock interface in the mesoscopic structure of the soil-rock mixtures. Considering that, a three-layer embedded model of double-inclusion composite materials and a multi-step multiphase micromechanics model were then built to calculate the shear modulus of the frozen soil-rock mixtures. Given the effect of pore structure of soil-rock mixtures at normal temperatures, its shear modulus was also calculated by using of the three-layer embedded model. Experimental comparison showed that compared with the two-layer embedded model, the effect predicted by the three-layer embedded model of the soil-rock mixtures was better. The shear modulus of the soil-rock mixtures gradually increased with the increase in rock regardless of temperature, and the increment rate of the shear modulus increased rapidly particularly when the rock content ranged from 50% to 70%. The shear modulus of the frozen soil-rock mixtures was nearly 3.7 times higher than that of the soil-rock mixtures at a normal temperature.

열연사상 압연시 스케일 결함발생에 미치는 산화피막 두께의 영향 (The Effect of Oxide Layer Thickness to the Scale Defects Generation during Hot finish Rolling)

  • 민경준
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
    • /
    • pp.412-422
    • /
    • 1999
  • Scale defects generated on the strip surface in a tandem finishing mill line are collected from the strip trapped among the production mills by freezing the growing scale on the strip by the melt glass coating and shutting down the line simultaneously. The samples observed of its cross sectional figure showed the process of scale defect formation where the defects are formed at the base metal surface by thicker oxidized scale during each rolling passes. The properties of the oxidized layer growth both at rolling and inter-rolling are detected down sized rolling test simulating carefully the rolling condition of the production line. The thickness of the oxidized layer at each rolling pass are simulated numerically. The critical scale thickness to avoid the defect formation is determined through the expression of mutual relation between oxidized layer thickness and the lanks of the strip called quality for the scale defects. The scale growth of scale less than the critical thickness and also to keep the bulk temperature tuning the water flow rate and cooling time appropriately. Two units of Inerstand Cooler are designed and settled among the first three stands in the production line. Two units of scale defect is counted from the recoiled strip and the results showed distinct decrease of the defects comparing to the conventionaly rolled products.

  • PDF

표면조도가 난류구조에 미치는 영향 (Organized structure of turbulent boundary layer with rod-roughened wall)

  • 이재화;이승현;김경연;성형진
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.189-192
    • /
    • 2008
  • Turbulent coherent structure near rod-roughened wall are investigated by analyzing the database of direct numerical simulation of turbulent boundary layer. The roughness sublayer id defined as two-point correlations are not independent of streamwise locations around roughness. The roughness sublayer based on the two-point spatial correlation is different from that given by one-point statistics. Quadrant analysis and probability-weighted Reynolds shear stress indicate that turbulent structures are not affected by surface roughness above the roughness sublayer defined by the spatial correlations. The conditionally-averaged flow fields associated with Reynolds shear stress producing Q2/Q4 events show that though turbulent vortices are affected in the roughness sublayer, these are very similar at different streamwise locations above the roughness sublayer. The Reynolds stress producing turbulent vortices in the log layer have almost the same geometrical shape as those in the smooth wall-bounded turbulent flows. This suggests that the mechanism by which the Reynolds stress is produced in the log layer has not been significantly affected by the present surface roughness.

  • PDF

저층배수를 이용한 담수호화 촉진에 관한 연구 (IMPROVEMENT OF FRESHENING PROCESS BY MEANS OF UNDERDRAINAGE CONDUIT)

  • 서영제;김진규
    • 물과 미래
    • /
    • 제25권1호
    • /
    • pp.111-119
    • /
    • 1992
  • 간척사업에 있어 용수원이 되는 깊은 담수화호에서는 체절후 온도 및 염분농도차에 의한 이층류가 발생하게 되며 이중 저층염분수는 밀도류 흐름의 구조특성상 배수\ulcorner문만으로 배제가 어려우므로 별도의 저층배수시설을 계획하여 담수호화를 촉진하고 있다. 성층화된 담수화호에서 상층부의 염도변화에 영향을 주는 요소로는 크게 나누어 세가지로 대별한다. 첫째는 상, 하층간의 밀도차에 의한 내부경계면의 난류현상, 둘째는 상층부의 흐름과 요동(바람,파)에 의한 혼합작용, 셋째는 하층부 호저토에서 발생되는 염분의 확산이다. 따라서 담수호화 모형을 위한 이층류흐름의 염분평행방정식을 구획하고 이 모형이 가지는 여러 가지 매개변수를 현장에서 실측된 염분농도변화에 부합하도록 유도하였다.

  • PDF

표층혼합층 생태계모델을 이용한 동해 식물플랑크톤의 계절변화 (Seasonal Variation of Phytoplankton in the East Sea Using A Surface Mixed Layer Ecosystem Model)

  • 김상우;기전풍;동옥지범
    • 한국수산과학회지
    • /
    • 제36권2호
    • /
    • pp.178-186
    • /
    • 2003
  • Seasonal variation of phytoplankton was investigated with surface mixed layer ecosystem model in the East Sea. The model consisted of four compartments (phytoplankton, zooplankton, nutrient, detritus) forced by mixed layer depths, photosynthetically available radiation and nutrient concentrations. From model results we estimated entrainment rate $2.5-4.0\;m{\cdot}day^{-1}$ to reproduce the two annual blooms, and reproduced seasonal variation of phytoplankton at southern and northern regions by the difference of surface winter mixed layer depth (MLD) using the entrainment rate value $3.0\;m{\cdot}day^{-1}$. The spring blooms in the southern and northern regions closely related to deepening of a winter surface MLD. In the southern region where MLD was shallow and phytoplankton spring bloom occurs one month in advance to the northern region where MLD was deep. The amount of light increases within the MLD during the onset of stratification and water temperature increases faster in spring in the southern region than the northern region. Decrease of phytoplankton was mainly affected by zooplankton grazing in the southern region and by nutrient exhaustion in the northern region. The fall bloom in the two regions was caused by the nutrient availability and entrainment on the phytoplankton.

산란계 사료에 \beta-Glucanase 첨가가 보리의 이용성에 미치는 효과 (Effects of the Addition of \beta-Glucanase to Barley-based Layer Diet)

  • 이정호;이규호;이영철;오상집
    • 한국가금학회지
    • /
    • 제21권3호
    • /
    • pp.195-205
    • /
    • 1994
  • Effects of the addition of \beta-glucanase to barley-based layer diets were examined by feeding 200 Leghorn layers with corn-based (Control) and \beta-glucanase supplemented diets (Barley+ Enzyme). The results obtained are sumrrarized as follows. 1. There were no siginificant (P>0.05) differences in hen-day egg production(%) and average egg weight between two treatments, indicating that the \beta-glucanase supplemented barley could successfully replace the commonly used corn in the layer diets. 2. Although there was no statistical difference (P>0.05) between two treatments, the daily feed consumption was numerically high in layers fed the barly diet compared to the corn-based diet. 3. Availabilities of crude fat and crude fiber of the barley diet were significantly poor (P<0.05) as compared to corn diet. 4. The \beta-glucarase supplementation depressed the viscosity of barley diets and excreta from therm. 5. Both serum and egg yolk cholesterol were not significantly affected by the addition of \beta-glucarase in the barley based diet. Our data indicate that the barley grain supplemented with \beta-glucarase can be sucessfully used as an energy source of layer diet when there is a price advantage. Although some possibilities to produce low cholesterol egg were recognized in this study, further studies pertaining to long-term feeding experiment and elucidaton of the metabolic interrelationship between serum and yolk cholesterol, are required to confirm the result.

  • PDF

Shelf 지형에서 규칙파의 쇄파실험 및 수치해석 (Hydraulic Experiments and Numerical Analysis for Wave Breaking of Regular Waves over a Shelf Region)

  • 이종인;;김영택
    • 한국해안해양공학회지
    • /
    • 제18권2호
    • /
    • pp.166-177
    • /
    • 2006
  • 본 연구에서는 Boussinesq방정식을 지배방정식으로 한 기존의 강비선형 모형과 고차 모형(다층모형)의 정확도를 각각 검토하였으며, 사용된 다층모형은 Lynett과 Liu(2004a)에 의해 개발된 것이다. 수치모형으로 shelf 지형에서의 쇄파를 모의하였으며, 실험에 적용된 파랑의 비선형성(${k_0}{A_0}$)은 0.029~0.180 범위이다. 전반적으로 2층 모형의 해석결과가 실험결과와 잘 일치하였다. 1층모형의 경우에는 쇄파점 가까운 곳에서부터 파고가 빨리 증폭이 된 반면, 2층모형의 파고증폭 정도는 수리실험결과와 잘 부합하였다.