• YAKHAK HOEJI
• /
• v.35 no.6
• /
• pp.461-465
• /
• 1991

Silica-based gel filtration chromatography has been used to characterize molecular weight of proteins. However, the molecular weight measured by this method was distorted by protein-silica interactions like hydrophobic and electrostatic forces. Therefore, we characterized protein-silica interaction using two forms of phytochrome (124 kDa) having different hydrophobicity and surface charge. PH and ionic strength affected the retention time of phytochrome suggesting that electrostatic force is the major interaction between protein and silica surface.

• Carbon letters
• /
• v.12 no.2
• /
• pp.70-80
• /
• 2011

Two pitches with different average molecular structures were electrospun and compared in terms of the properties of their fibers after oxidative stabilization, carbonization, and activation. The precursor with a higher molecular weight and greater content of aliphatic groups (Pitch A) resulted in better solubility and spinnability compared to that with a lower molecular weight and lower aliphatic group content (Pitch B). The electrical conductivity of the carbon fiber web from Pitch A of 67 S/cm was higher than that from Pitch B of 52 S/cm. The carbon fiber web based on Pitch A was activated more readily with lower activation energy, resulting in a higher specific surface area compared to the carbon fiber based on Pitch B (Pitch A, 2053 $m^2/g$; Pitch B, 1374 $m^2/g$).

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.10
• /
• pp.1548-1557
• /
• 2019

Objective: To investigate the effects of dietary supplementation with different levels and molecular weights of fungal ${\beta}$-glucan on productive performances, health, carcass traits and meat quality in broilers. Methods: Two hundred and ten of one-day-old chicks with equal sex were assigned to seven experimental groups in $2{\times}4$ factorial arrangement. These groups were supplemented with (0, 10, 30, and 60 ppm) of molecular weight 1-3, 1-6 ${\beta}$-glucan (low or high). High molecular weight ${\beta}$-glucan (H: 943 kDa) was obtained from Ophiocordyceps dipterigena BCC 2073, whereas H with ${\gamma}$-Irradiation treatment was performed to achieve low molecular weight ${\beta}$-glucan (L: 8 kDa). Results: There was no statistical significance in productive performances, apparent digestibility and interaction between fixed factors along 42 days of experiment (p>0.05). A higher caecal amylase activity was present in the group that received L, while there was a dramatic decrease in H and the control groups, respectively (p<0.05). The increase of supplemental dose increased caecal amylase activity (p<0.05). Immunomodulatory effects from L was revealed by the marked increase of phagocytic activity, relative weight of thymus and bursa of fabricius (p<0.05). Similarly, the additive dose at 30 ppm provided the same results, whereas the only significant difference with supplementation at 60 ppm was an increase in phagocytic activity (p<0.05). Interestingly, villi height of broilers fed L was higher than other groups (p<0.05). The treatments did not influence haematology, blood chemistry, antibody production level against vaccination, carcass traits and meat quality (p>0.05). Conclusion: The supplementation of L at 30 ppm was suggested to achieve benefits of immune modulation without adverse effects on other parameters.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.913-922
• /
• 2016

This study attempted to measure molecular weight (MW) of melamine-urea-formaldehyde (MUF) resins prepared by two different synthesis methods: the one-step MUF resins were synthesized in one batch procedure, while the two-step MUF resins were prepared by a physical mixing of urea-formaldehyde (UF) resin with melamine-formaldehyde (MF) resin that had been synthesized in a separate procedure. The properties of medium density fiberboard (MDF) panels bonded with two types of MUF resins were also investigated. MWs of these MUF resins were measured using gel permeation chromatography (GPC). In addition, this study measured the MWs of one-step MUF resin during its synthesis procedure. The performance of two types of MUF resins was evaluated by determining properties of MDF panels prepared in laboratory. As the synthesis procedure progressed, both number average MW ($M_n$) and weight average MW ($M_w$) of one-step MUF resin gradually increased, while the polydispersity index (PDI) decreased. And low Mw species of the resin predominantly decreased as the synthesis step progressed. The one-step MUF resin showed greater $M_n$ and $M_w$ than those of the two-step ones even though the PDI values of both resins were very similar each other. As expected, the one-step MUF resin resulted in better properties of MDF panels than those of two-step resins. In particular, the one-step MUF resin provided better internal bond (IB) strength and thickness swelling (TS) with MDF panels than those of two-step ones, indicating better water resistance of the one-step resin. These results suggest that the preparation method of MUF resins have a great impact on the MW and final panel properties.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.2
• /
• pp.277-282
• /
• 2001

The effects of chitosans with two different molecular weights (150 and 37 kDa) on the clarification of persimmon vinegar were investigated. The coagulated solids increased with increasing chitosan concentrations. Chitosan treatment had no effect on pH and acidity. Turbidity, browning, contents of tannin and soluble solids decreased with increasing chitosan concentrations. An increase in chitosan concentration resulted in an increase in color L* value and a decrease in a* and b* values. Reduction in turbidity and tannin contents somewhat differed depending on the molecular weights of chitosan. In sensory evaluation, chitosan treatment did not affect color and flavor over all concentrations tested. However, astringent taste was noticeably strong by treatment with 500mg/L chitosan, resulting in low overall acceptability. Therefore, the most effective clarification of persimmon vinegar was achieved by treatment with 400mg/L chitosan, irrespective of molecular weight.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.11
• /
• pp.769-775
• /
• 2013

UV-induced transformations in the characteristics of dissolved organic matter (DOM) and the subsequent effects on the disinfection by-product formation potential (DBPFP) were investigated using the mixtures of the two humic substances with different sources, and two different size fractions of Suwannee River fulvic acid (SRFA). 7 day-photodegradation resulted in the decrease of specific ultraviolet absorbance (SUVA) of the mixtures as well as the specific DBPFP. After the irradiation, however, higher specific DBPFP values were consistently observed at the same range of the SUVA values. This suggests that non UV-absorbing components, generated by the UV-irradiation, may contribute to the formation of DBPs. Two different molecular size fractions of SRFA showed dissimilar responses to photodegradation. The behavior was also influenced by the types of the DBPs generated. Higher levels of trihalomethenes (THMs) were formed per organic carbon for the high molecular fraction compared to the low molecular fraction, whereas no differences were found in the formation of haloacetic acids (HAAs) between the two different size fractions. The formation of the two types of DBPs also differed by the irradiation times. Specific formation potential of THMs consistently increased upon the irradiation, whereas HAAs showed the initial increase followed by the decrease in their specific formation potential.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.1
• /
• pp.1-13
• /
• 2021

This study was conducted to investigate the effects of the synthesis method, melamine content, and GPC parameters (such as flow rate, column-detector temperature, and sample injection temperature) on the molecular weight of melamine-urea-formaldehyde (MUF) resins. Two different synthesis methods were employed. In the first method, MUF-A resins were synthesized by simultaneously reacting urea, formaldehyde, and melamine (5%, 10%, and 20%) using the reaction of alkaline-acid-alkaline steps under controlled temperature and viscosity. In the second method, MUF-B resins were synthesized by first reacting melamine at the same levels with formaldehyde and then by adding urea. The highest weight average molecular weight (Mw) of MUF-A resins was found at 10% melamine content when the flow rate was 0.3 and 0.8 ml/min; Mw decreased slightly at 20% melamine content. The results showed that Mw increased with an increase in the melamine content when the flow rate was 0.5 and 1.0 ml/min. In addition, Mw was the highest when the flow rate, column-detector temperature, and injection temperature were 0.3 ml/min, 50℃, and 25℃, respectively. On the contrary, MUF-B resins had greater Mw and number average molecular weight (Mn) than MUF-A resins. Overall, Mw and Mn increased as the melamine content increased. The optimal GPC parameter for MUF resins was determined as follows: a flow rate of 0.5 ml/min, a column-detector temperature of 50℃, and a sample injection temperature of 50℃.

• BMB Reports
• /
• v.28 no.4
• /
• pp.281-289
• /
• 1995

Homogeneous human deoxycytidine kinase was purified in one step from a variety of spontaneous human leukemic cells (T-ALL, B-ALL, B-CLL, AML, CML), and from cultured T-lymphoblast cells (MOLT-4) using the newly developed affinity medium, $dCp_4$-Sepharose. Starting with an ammonium sulfate fraction, purification was achieved in one step with the kinase being eluted from a column by the end product inhibitor, dCTP. The purified deoxycytidine kinase from T-ALL cells phosphorylated deoxyadenosine and deoxyguanosine, as well as deoxycytidine. The enzyme purified from T-ALL and B-CLL cells yielded one major band with a molecular weight of 52 kDa determined by SDS-polyacrylamide gel electrophoresis. AML and CML cells yielded one 52 kDa band and an extra band of 30 kDa molecular weight. On the other hand, B-ALL and MOLT-4 cells showed a low molecular weight band of 30 kDa only. However, the electrophoretic mobilities of enzymatic activity in 12% non-denaturing gels were identical for the dCyd kinase from all different kinds of leukemic cell lines, except that the B-ALL, B-CLL, and MOLT-4 cell preparations had an extra minor peak, all at the same position. dAdo and dCyd phosphorylating activities comigrated indicating that these activities are all associated with the same protein. Two new methods, a disk implantation method and a nitrocellulose powder method were used with a small amount of enzyme protein to raise polyclonal antibodies against dCyd kinase purified from T-ALL cells.

• Macromolecular Research
• /
• v.17 no.6
• /
• pp.365-377
• /
• 2009

In this feature article, we briefly review the new methods we have utilized recently in the investigation of morphology and phase behavior of block copolymers. We first describe the chromatographic fractionation method to purify block copolymers from their side products of mainly homopolymers or block copolymer precursors inadvertently terminated upon addition of the next monomer in the sequential anionic polymerization. The chromatographic method is extended to the fractionation of the individual block of diblock copolymers which can yield the diblock copolymer fractions of different composition and molecular weight, which also have narrower distributions in both molecular weight and composition. A more detailed phase diagram could be constructed from the set of block copolymer fractions without the need of acquiring many block copolymers each prepared by anionic polymerization. The fractions with narrow distribution in both molecular weight and composition exhibit better long-range ordering and sharper phase transition. Next, epitaxial relationships between two ordered structures in block copolymer thin film is discussed. We employed the direct visualization method, transmission electron microtomography(TEMT) to scrutinize the grain boundary structure.

• Macromolecular Research
• /
• v.9 no.4
• /
• pp.206-209
• /
• 2001

One of the approaches to obtain functional polymer is polymerization of a monomer having two functional groups. Although polymerization of a monomer having two different types of functional group is general, the author has been interested in the polymerization of a monomer having two similar types of functional group. This work shows the preparation and selective polymerization of 4-methylene-2-styryl-1,3-dioxolane having two similar reactive double bonds via cationic polymerization at ambient temperature. Cationic ring-opening polymerization of 4-methylene-2-styryl-1,3-dioxolane using benzylsulfonium salt as a photo-initiator quantitatively afforded high molecular weight of poly(keto-ether).