• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.21-28
• /
• 2015

In this paper, we propose a prototype-based classification learning by using the nearest-neighbor rule. The nearest-neighbor is applied to segment the class area of all the training data into spheres within which the data exist from the same class. Prototypes are the center of spheres and their radii are computed by the mid-point of the two distances to the farthest same class point and the nearest another class point. And we transform the prototype selection problem into a set covering problem in order to determine the smallest set of prototypes that include all the training data. The proposed prototype selection method is based on a greedy algorithm that is applicable to the training data per class. The complexity of the proposed method is not complicated and the possibility of its parallel implementation is high. The prototype-based classification learning takes up the set of prototypes and predicts the class of test data by the nearest neighbor rule. In experiments, the generalization performance of our prototype classifier is superior to those of the nearest neighbor, Bayes classifier, and another prototype classifier.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.13-34
• /
• 1997

The impact of a central place on daily living over wide outlying territory has been one of traditional subjects in the field of urban geography. The flow of rural population toward the central city of Chinju characterizes the population movement in Western Kyungnam, where the spillover of urban population into outlying areas, an especially prominent phenomenon in American society, does not occur. The central city of Chinju is supposed to be the most favored settlement area in Western Kyungnam. More than two thousands of teachers. who live in Chinju, cross the city boundary each morning to do their jobs in Western Kyungnam. But only ninety teachers living outside Chinju commute to the workplace in the city. The teachers willingly spend hours commuting each day to enjoy better quality of life in the central city. In fact, the central city of Chinju functions as bedroom communities for many middle-class workers in Western Kyungnam. On the basis of teachers' commuting behavior, four levels of Chinju's urban spheres are identified in Western Kyungnam. As Table-6 and Figure-2 show, the first-order level of Chinju's sphere includes most Myuns of Sanchung/Hadong Guns and some Myuns of Sachun/Gosung Guns. The second-order level comprises Sanchung/Sachun Eubs and many Myuns of Sachun /Gosung Guns. The third-order level is made up of Samchunpo, Hadong/Gosung/Eryung/Namhae/Habchun/Hamyang Eups, and many Myuns of Eryung/Namhae/Habchun Guns. And all of Guchang Gun and most Myuns of Hamyang Gun belong to the fourth-order level of Chinju's sphere. The influence sphere of Metropolitan Chinju is extended farther in the direction of less competition with other metropolises. Such a situation occurs to the west and south of Chinju. Daily commuting, defined as the journeys to and from work, is an excellent indicator for delimiting urban spheres of influence.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.10
• /
• pp.1731-1741
• /
• 2010

Personal appearance attitude about the ideal beauty is influenced by the context of the culture one belongs to. In a cultural sphere the higher public self-consciousness individuals have then the more sensitive one would be to the sociocultural pressure about thinness and thus the higher the expectations about the ideal appearance. Accordingly, in that culture one would have more body shame when they do not reach the ideal beauty standard. This study examines the difference between Korean and German culture, with a focus on the age group of university students who are especially sensitive to aesthetic consciousness. The results are as follows: There were differences of public self-consciousness, perceived sociocultural pressure, appearance internalization, appearance awareness and body shame between the two cultural spheres; in addition, Korean female university students were significantly higher in all the variables when compared to German female university students. The higher public self-consciousness and perceived sociocultural pressure then the higher the internalization of the ideal appearance; the ideal appearance awareness increased the body shame. In the case of the German female university student group, public self-consciousness influenced body shame directly; however, in case of the Korean female university student group public self-consciousness were not directly affective. Rather, perceived sociocultural pressures directly affected body shame and showed the difference between the cultural spheres. Finally, in regards to the direct effect about body shame, the German female university student group noted the influence of public self-consciousness as the most significant; however, the Korean female university student group noted the influence of sociocultural pressure as the most significant.

• Korean Journal of Materials Research
• /
• v.23 no.12
• /
• pp.667-671
• /
• 2013

We present an easy method of preparing two-dimensional (2D) periodic hollow tin oxide ($SnO_2$) hemisphere array gas sensors using polystyrene (PS) spheres as a template. The structures were fabricated by the sputter deposition of thin tin (Sn) metal over an array of PS spheres on a planar substrate followed by calcination at an elevated temperature to oxidize Sn to $SnO_2$ while removing the PS template cores. The $SnO_2$ hemisphere array structures were examined by scanning electron microscopy and X-ray diffraction. The structures were calcined at various temperatures and their sensing properties were examined with varying operation temperatures and concentrations of nitric oxide (NO) gas. Their gas-sensing properties were investigated by measuring the electrical resistances in air and the target gases. The measurements were conducted at different NO concentrations and substrate temperatures. A minimum detection limit of 30 ppb, showing a sensitivity of S = 1.6, was observed for NO gas at an operation temperature of $150^{\circ}C$ for a sample having an Sn metal layer thickness corresponding to 30 sec sputtering time and calcined at $600^{\circ}C$ for 2 hr in air. We proved that high porosity in a hollow $SnO_2$ hemisphere structure allows easy diffusion of the target gas molecules. The results confirm that a 2D hollow $SnO_2$ hemisphere array structure of micronmeter sizes can be a good structural morphology for high sensitivity gas sensors.

• Macromolecular Research
• /
• v.15 no.3
• /
• pp.256-262
• /
• 2007

The purpose of this study was to determine the effect of surface modification on the fibrovascular ingrowth into porous polyethylene (PE) spheres ($Medpor^{(R)}$), which are used as an anophthalmic socket implant material. To make the inert, hydrophobic PE surface hydrophilic, nonporous PE film and porous PE spheres were subjected to plasma treatment and in situ acrylic acid (AA) grafting followed by the immobilization of arginine-glycine-aspartic acid (RGD) peptide. The surface-modified PE was evaluated by performing surface analyses and tested for fibroblast adhesion and proliferation in vitro. In addition, the porous PE implants were inserted for up to 3 weeks in the abdominal area of rabbits and, after their retrieval, the level of fibrovascular ingrowth within the implants was assessed in vivo. As compared to the unmodified PE control, a significant increase in the hydrophilicity of both the AA-grafted (PE-g-PAA) and RGD-immobilized PE (PE-g-RGD) was observed by the measurement of the water contact angle. The cell adhesion at 72 h was most notable in the PE-g-RGD, followed by the PE-g-PAA and PE control. There was no significant difference between the two modified surfaces. When the cross-sectional area of tissue ingrowth in vivo was evaluated, the area of fibrovascularization was the largest with PE-g-RGD. The results of immunostaining of CD31, which is indicative of the degree of vascularization, showed that the RGD-immobilized surface could elicit more widespread fibrovascularization within the porous PE implants. This work demonstrates that the present surface modifications, viz. hydrophilic AA grafting and RGD peptide immobilization, can be very effective in inducing fibrovascular ingrowth into porous PE implants.

• Cross-Cultural Studies
• /
• v.42
• /
• pp.205-240
• /
• 2016

The combination of animals has been developed in each of the cultural spheres as a method of metaphor and symbolism of the cultural code. However, its symbolism is not a fixed constant, but a variable and relative constant. This work focused on its features in comparison with East Asian cultural spheres comedic stories and proverbs. Consequently, several features were identified. First, the combinations of animals in similar comedic stories and proverbs among Korea, Japan and China show a difference in point of view. Korean focuses on the difference of the two animals, but Chinese and Japanese focus on the differences in value and level. Second, the method of anthropomorphization is relatively more developed in China and Japan than Korea. The combinations of animals of Chinese comedic stories and proverbs particularly in the field of anthropomorphization, are most focused on age and sex of the animal. The animal's age or sex remains mostly undetermined in Korean animal's proverbs, unlike Chinese proverbs. On the other hand, two animals in Japanese comedic stories and proverbs are usually of the male and female gender from. Third, the combinations of animals of Chinese and Japanese focus on the animal's body and its characteristics of action. Chinese and Japanese combine the characteristics of the two animal's bodies and actions. This feature apparently caused the resultant combinations of the animal's body parts, for example, the Dragon. Understanding of the combinations of two animals is a good portal into the features of East Asian culture sphere.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.3
• /
• pp.60-64
• /
• 2012

In this paper, an investigation of a room temperature active magnetic regenerative refrigerator is carried out. Experimental apparatus includes two active magnetic regenerators containing 186 g of Gd spheres. Four E-type thermocouples are installed inside the Active magnetic regenerator(AMR) to observe the instantaneous temperature variation of AMR. Both warm and cold heat exchangers are designed for large temperature span. The cold heat exchanger, which separates the two AMRs, employs a copper tube with length of 80 mm and diameter of 6.35 mm. In order to minimize dead volume between the warm heat exchanger and AMRs, the warm heat exchangers are located close to the AMRs. The deionized water is used as a heat transfer fluid, and maximum 1.4 T magnetic field is supplied by Halbach array of permanent magnets. The AMR plate, which contains the warm and the cold heat exchangers and the AMRs, has reciprocating motion using a linear actuator and each AMR is alternatively magnetized and demagnetized by a Halbach array of permanent magnet. Since the gap of the Halbach array of permanent magnets is 25 mm and two warm heat exchangers have the motion through it, a compact printed circuit heat exchanger (PCHE) is used as a warm heat exchanger. A maximum no-load temperature span of 26.8 K and a maximum cooling power of 33 W are obtained from the fabricated Active Magnetic Regenerative Refrigerator (AMRR).

• Journal of the Korean Home Economics Association
• /
• v.40 no.11
• /
• pp.107-118
• /
• 2002

Many women experience the conflicting demands of work and family life according to the increase of employed women. Their demand for balance of two spheres makes the companies have family friendly policy. Family friendly policy is win-win policy which gives benefits to the employers and the employees by helping the employees to balance of their lives. But this policy has been recognized as the one for women and which only companies have to carry out. This study aims to suggest and extend the applicable field of the family friendly policy, and press that the whole society have to be family friendly. So, this study examined the necessity of family friendly policy in the aspects of company and society. And it showed how the employers, policy makers, general public society and communities support the family by carrying out and applying the policy in USA.

• Tribology and Lubricants
• /
• v.12 no.4
• /
• pp.52-59
• /
• 1996

The results of the electrical contact conductivity of multi-contact spots accounting the surface roughness and the non-conductive films of different origins such as air, water, cutting oil, and machining oil are presented. The array of metal spheres compressed between two flat plates has been used for simulation of the contact behavior of multiple contact of solids, under normal loading. Measurement of electrical contact resistance has been made using the equipment providing the adequate accuracy in the range of micro Ohms. The data on electrical contact resistance have been compared with theoretical predictions using the multiple contact model of constriction resistance. The effect of single spot number and array on conductivity of contact has been evaluated. The results of the experiments show that the contact resistance are closely related to the number of loading cycles, form of surface roughness, and presence of non-conductive films that reduce the size of the real electrical contact spots.

• Journal of the Korean Society of Safety
• /
• v.9 no.3
• /
• pp.34-40
• /
• 1994

It is important to have exact informations on the real contact mechanism between spheres and rough plates under various normal loads, sphere diameters and combined surface roughnesses. Most previous papers have proposed the questions of the errors which might be incurred when the Hertzian theory is used to calculated the contact deformation and the contact pressure of practical higher pair. So, this study investigates the real contact deformation between a rough sphere and a rough plate by three experimental methods far from any assumptions and theorems. The soot coating method among them is used successfully. Accordingly, this study presents the simple dimensionless parameter to predict such errors to occur in the design of high pair members and to govern the real mechanism of two-body higher pair.