This study aimed to compare movement patterns of shoulder joints between the right and left symmetry in stroke patients and control subjects. This study proposes use of the voluntary response index (VRI) calculated from quantitative analysis of surface electromyographic (sEMG) and motion data recorded during voluntary movement as a feeding task. The VRI is comprised of two numeric values, one derived from the total muscle activity recorded for the voluntary motor task (magnitude), and the other from the sEMG distribution across the recorded muscles with the similarity index (SI). Five stroke patients and five age-matched healthy controls were recruited. Feeding motion was performed using the provided spoon five times with rests taken on a chair in between tasks. EMG data were digitized and analyzed on the basis of the root mean square (RMS) envelope of activity. The average amplitude of responses was calculated. Responsiveness and clinically meaningful levels of discrimination between stroke patients and control for EMG magnitude and SI were determined. The similarity index of the results from two successive examinations of both sides apart for stroke patients and control subjects were .86 and .95 in motion analysis and .84 and .99 in electromyographic analysis. The SI of sEMG data and motion data was significantly correlated in stroke patients. The data suggest that SI is a sensitive program for comparing and analyzing the symmetry of muscle activity and motion in both sides. This analysis method has a clinical value in grading muscular activity and movement impairment after brain injury.
Background: Cervical foraminal stenosis (CFS) is one of the degenerative changes of the cervical spine; however, correlations between the severity of stenosis and that of symptoms are not consistent in the literature. Studies to date on the prevalence of stenosis are based on images obtained from the departments treating cervical lesions, and thus patient selection bias may have occurred. The purpose of this study was to investigate the prevalence of CFS according to the site, extent, and morphology of stenosis using cervical computed tomography (CT) images obtained from patients who were visiting not because of symptoms related to the cervical spine, cervical pain, or upper limb pain. Methods: Among patients who underwent CT from January 2016 to March 2016 for reasons other than cervical spine symptoms, a total of 438 subjects were enrolled, and 2,628 cervical disc images (C4-5, C5-6, and C6-7; left and right sides) were examined. Three orthopedic surgeons performed two measurements each at 4-week intervals. Values were used for analysis if matched by more than two surgeons; if no match was found, the median values were used for analysis. The left and right sides on the same axial image were independently classified. Results: Left C5-6 stenosis was most common (24.66%) among patients. At the left C6-7, there were 20 focal types and 33 diffuse types. At bilateral C4-5 and right C6-7, the focal type was more common, whereas at bilateral C5-6 and left C6-7, the diffuse type was more common. Age and the severity of stenosis showed statistically significant correlation at all cervical levels. Conclusions: The prevalence of CFS was highest at the C5-6 level (19.06%). Compared to other levels, focal stenosis was more frequent at C4-5 and diffuse stenosis was more common at C5-6. At C6-7, the incidence of focal stenosis was higher on the right side and that of diffuse stenosis was higher on the left side.
Marandi, S. Masoud;Dehkordi, Mohsen Botshekanan;Nourbakhsh, S. Hassan
Steel and Composite Structures
/
제31권3호
/
pp.261-276
/
2019
The study investigates the free vibration of a nano-scale sandwich beam by an extended high order approach, which has not been reported in the existing literature. First-order shear deformation theory for steel skins and so-called high-order sandwich panel theory for the core are applied. Next, the modified couple stress theory is used for both skins and cores. The Hamilton principle is utilized for deriving equations and corresponding boundary conditions. First, in the study the three-mode shapes natural frequencies for various material parameters are investigated. Also, obtained results are evaluated for two types of stiff and soft cores and isotropic, homogenous steel skins. In the research since the governing equations and also the boundary conditions are nonhomogeneous, therefore some closed-form solutions are not applicable. So, to obtain natural frequencies, the boundary conditions are converted to initial conditions called the shooting method as the numerical one. This method is one of the most robust approaches to solve complex equations and boundary conditions. Moreover, three types of simply supported on both sides of the beam (S-S), simply on one side and clamp supported on the other one (S-C) and clamped supported on both sides (C-C) are scrutinized. The parametric study is followed to evaluate the effect of nano-size scale, geometrical configurations for skins, core and material property change for cores as well. Results show that natural frequencies increase by an increase in skins thickness and core Young modulus and a decrease in beam length, core thickness as well. Furthermore, differences between obtained frequencies for soft and stiff cores increase in higher mode shapes; while, the more differences are evaluated for the stiff one.
Noorifard, Azadeh;Tabeshpour, Mohammad Reza;Saradj, Fatemeh Mehdizadeh
Earthquakes and Structures
/
제23권2호
/
pp.151-168
/
2022
Torsion is one of the most important causes of building collapse during earthquakes. Sometimes, despite the symmetric form of the building, infill walls disturb the symmetry of the lateral resisting system. The purpose of this research is to investigate the effect of urban layout on developing torsion caused by infill walls. For this purpose, a typological study was conducted based on the conditions of perimeter walls on 364 buildings and then 9 cases were selected. The dimensions of the selected buildings are constant and the conditions of the perimeter walls including facades with openings and cantilevered facades are variable. The selected buildings with 60 different layouts of infill walls were analyzed and the behavior of each one was evaluated based on the torsional irregularity criteria of seismic codes. The results of the analyses showed that if the perimeter walls of a building are symmetric, asymmetric interior walls will not be important in developing torsion and effective parameters in symmetry of the perimeter infill walls are the number of walls, area of openings, aspect ratio, and construction details. Finally, architectural solutions to mitigate the torsional effects of infill walls were proposed for buildings with solid infill walls on some sides, for buildings where the perimeter walls of one side are on the cantilevered part, and for buildings where the perimeter walls of two adjacent sides are on the cantilevered part. In three-sided buildings, where two adjacent façades are cantilevered, it is often impossible to use the potential of the infill walls.
A new DC/DC converter with zero voltage switching is proposed for applications with high input voltage and high load current. The proposed converter has two circuit modules that share load current and power rating. Interleaved pulse-width modulation (PWM) is adopted to generate switch control signals. Thus, ripple currents are reduced at the input and output sides. For high-voltage applications, each circuit module includes two half-bridge legs that are connected in series to reduce switch voltage rating to $V_{in}/2$. These legs are controlled with the use of asymmetric PWM. To reduce the current rating of rectifier diodes and share load current for high-load-current applications, two center-tapped rectifiers are adopted in each circuit module. The primary windings of two transformers are connected in series at the high voltage side to balance output inductor currents. Two series capacitors are adopted at the AC terminals of the two half-bridge legs to balance the two input capacitor voltages. The resonant behavior of the inductance and capacitance at the transition interval enable MOSFETs to be switched on under zero voltage switching. The circuit configuration, system characteristics, and design are discussed in detail. Experiments based on a laboratory prototype are conducted to verify the effectiveness of the proposed converter.
The purpose of this study is to identify more types of residents in medium-sized apartments in Seoul by lifestyle that has been used as a variable of space planning and to investigate and present bathroom design appropriate for characteristics of each resident type. The article examines the general characteristics, lifestyle types, and preference for the bathroom design. A total of 642 samples, acquired via internet survey, were analyzed with the statistical computer program SPSS PC+ window version 16.0. The conclusion of the article are as follows: 1) The lifestyle of users living in medium-sized apartments are categorized into 4 types: trend seeking, aesthetic seeking, family seeking, information seeking types. 2) The preference for the bathroom design of trend seeking type, the toilet is a bidet-builtin type and the washstand is a semi-counter type and the bathtub is a spa type and the shower booth is a bathtub-extending type. The storage closet is a upper-fixed type with two sides, the finishing materials are tiles and PVC monorium, and light built in a wall. 3) The preference for the bathroom design of aesthetic seeking type, the toilet is a bidet-builtin type and the washstand is a semi-counter type and the bathtub is a whirlpool type and the shower booth is a steam-sauna type. The storage closet is a upper-fixed with one side and opened closet, the finishing materials are tiles. 4) The preference for the bathroom design of family seeking type, the toilet is a bidet-builtin type and the washstand is a stand type and the bathtub is a reclamation type and the shower booth is a partition type. The storage closet is a upper-fixed with three sides. 5) The preference for the bathroom design of information seeking type, the toilet is a bidet-builtin type and the washstand is a semi-counter and the bathtub is a spa type and the shower booth is a partition type. The storage closet is a upper-fixed type with two sides. The results of this study may be used as basic data in planning bathroom design for housing supply for housing suppliers, and used as significant information for residents to identify their own types that can be referred when they select apartments to live in.
Purpose - There are common factors both in Technology Readiness and Acceptance Model and Technology Paradox Theory which can be put together and made in one unified model. The unified model can provide the following merits. First, the unified model is simple but contains factors of the models. Second, the unified model can clarify the process of technology acceptance of common consumers. Third, the unified model can provide the opportunities to analyze the negative sides of new technology, thus find ways to improve the level of acceptance by general consumers. Research design, data, and methodology - The 450 questionnaires were handed out to people around Seoul and 421 were collected. Except insincere and wrong-marked ones, 402 were used to analyze. SPSS program was used to analyze. Factor analysis, regression analysis was conducted to test the hypotheses. Results - By analyzing sub-factors of both models and binding the common factors in one category, we accomplish one model. And we tested the model by empirical method. The results show that the results from the unified model are almost same as the results from the two models. In other words, the unified model works. Conclusions - Explaining one state of affair by two different method is in some sense distracting attention. By devising a new model including factors of both models, we can explain the affair more straightforward and efficiently. At first the technology acceptance model was devised to explain the technology users in an organization and the following tests and revised models were for the similar purposes. However, as on-lone activities including contracts have been expanded and become important, consumers as the technology uses have emerged as first factor to consider. In accordance models to explain this situation has been suggested. The model suggested in this research is one of the models but it has the following merits. That is, it is simple but has strong explanation power, it can clarify the process of technology acceptance of common consumers by containing negative sides of consumer conception, and thus, it can provide the opportunities to analyze the negative sides of new technology, also find ways to improve the level of acceptance by general consumers.
The purpose of this study is to examine and analyze the Untied Nations' efforts for peace on Korean peninsular after CCF's participation in Korean War. The Untied Nation tried to negotiate th peace plan between two sides from the end of 1950. Once the CCF's entry into the war had been confirmed, the war situation moved to a new phase, and the UN forces, which had guided the war in an effort to destroy the NKP A forces, and to punish North Korea, had to set up new guidelines to cope with the new situation. Accordingly, in late November, 1950, the UN forces camp, mainly the US Joint Chiefs of Staff and the United Nations Command, discussed various options, such as an expansion of the war up to the Chinese territory, a cease fire along the 38th Parallel, or a forced and inevitable evacuation. The Korean delegation to the UN insisted that "the unification of Korea should be achieved only by victory in the war. The Chinese intervention in the war is a Challenge to the UN in the same way as the North Korean invasion. The UN participation in the war was to repulse the invasion. With the same spirit we should drive back the Chinese Communists." The Korean delegation also emphasized to the friendly nations the political objective and will of unification, and that a cease fire at a threshold of unification might return us to the status quo ante bellum, and would be contrary to the Korean nation's desire. At that time, particularly, the US strongly considered the employment of nuclear weapons as one of the new strategies to cope with the Chinese invasion. The international effects of these casual remarks were realized almost at once. The British Prime Minister who had not wanted the expansion of war in the Far East, especially from the view point of the interest of NATO's security, visited Washington. so the conference had a very important meaning for the UN forces' new strategy. On the other hand, at the UN, on the 5th of December, the very day Truman and Attlee agreed to seek a cease-fire under UN auspices, a group of thirteen Asian and Arab states proposed to ask China and North Korea not to cross the 38th Parallel, and sounded out both sides about a cease fire along the 38th Parallel. The United States and the United Kingdom gave their assent, but China and North Korea gave no direct response. The CCF, who were securing the initiative of operation, were not agreeable with the proposal of the UN forces. The Untied Nation has tried to negotiate th peace plan between two sides from the December of 1950 and January of 1951. The Untied Nations' has achieved great results to negotiate for the peace plan on Korean peninsular after CCF's participation in Korean War. It's the results considering both the operation situation and political opinions.
Journal of Advanced Marine Engineering and Technology
/
제18권2호
/
pp.25-32
/
1994
The characteristics of the R-22 two-stage compression refrigeration systems were investigated. The apparatus consisted of 0.5HP and 1HP hermetic reciprocating compressors for the high and low stage sides respectively, a condenser, an evaporator, a heat exchanger, four expansion valves, and two intercoolers. The experiments covered a range of refrigerant flow rates from 24 to 84kg/h, and the inlet temperature of cooling water in the condenser and heat source water in the evaporator ranged from 20 to 30$^.\circ}C$The results Showed that the refrigerant flow rate had greater effect on the refrigerating capacities, the compression efficiency and the coefficient of performance of two-stage compression systems than the inlet temperature of heat source water. And all these values were decreased with increasing inlet temperatures of the cooling water. The pressure drops in the evaporator of two-stage compression systems were decreased in proportion to the increase in the inlet temperature of the heat source and cooling water, but it was increased by the refrigerant flow rate.
Cleft lip is a congenital deformity condition with separation of the two sides of the lip and results in nose deformity. Evaluation of surgical corrections and outcome assessments in nose deformity resulting from the cleft lip depend mainly on doctor's objective judgment. Development of an objective assessment tool in evaluation of the condition and surgical outcome of cleft lip nose deformity patients will help in advancement and evaluation of surgical techniques of cleft lip. Hence, our study aimed on quantitative assessment of a cleft lip nose deformity condition by comparing following parameters gathered from a photographic image of a cleft lip patient: (1) angle difference between two nostril axis, (2) center of the nostril and distance between two centers, (3) overlapped area of two nostrils and (4) the overlapped area ratio of two nostrils. Assessment results of the nose deformity were determined by statistical analysis of evaluation results from three greatly experienced plastic surgeons. In addition, regression model was developed using correlation relationship and factor analysis of parameters from results of the image analysis.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.