• 한국멀티미디어학회논문지
• /
• 제20권12호
• /
• pp.2009-2015
• /
• 2017

A two-dimensional lens is required to reproduce both the horizontal and vertical parallax through an autostereoscopic 3D display. Among the two-dimensional lenses, a hexagonal micro lens array (MLA) having good optical efficiency is mainly used. However, the hexagonal MLA has complex geometric features. The first feature is that the lens cells are zigzagged in the vertical direction, which should be reflected in the view number calculation for each sub-pixel. The second feature is that the four sides of a hexagonal lens cell are tilted, requiring a more careful view index assignment to the lens cell. In this paper, we propose a sub-pixel multiplexing scheme suitable for the features of the hexagonal MLA. We also propose a view-overlay algorithm based on a two-dimensional lens and compare subjective image quality with existing view-selection through autostereoscopic 3D display implementation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.53-54
• /
• 2006

We have studied the viewing angle control of a twist nematic liquid crystal display (TN-LCD). The TN-LCD exhibits a bad image quality along vertical direction, due to characteristics such as low contrast ratio and grey scale inversion. The proposed new TN-LCD has the function of switching between the wide viewing mode and narrow viewing angle mode using two tilted LC layers at both sides of a TN-cell Tilt angles of the two LC layers, $14^{\circ}$ and $60^{\circ}$ were required in both wide viewing angle and narrow viewing angle modes, respectively.

• 한국임상수의학회지
• /
• 제16권2호
• /
• pp.519-522
• /
• 1999

This study was performed to determine the effects of anastomosis on the internal diameter and wall thickness of jugular vein. Tro shepherd dogs were used for this experiment. In dog 1, xylazine(2 mg/kg) and ketamine(5.5 mg/kg) were injected intramuscularly for induction followed by enflurane(3%) anesthesia. In dog 2, acepromazine(0.03 mg/kg) and ketamine(5 mg/kg) were injected intravenously for induction followed by enflurane(3%) anesthesia. The dogs were heparinized(1 mg/kg) for the prevention of thrombosis. After jugular vein was exposed by incision of left cervical area, two Johns Hopkins bulldog clamps were clamped. Jugular vein was cut between two clamps, and it was reanastomosed using 5-0 silk. Ultrasonography was done along the jugular vein on both sides of each dogs 21 days after anastomosis surgery. The internal diameter and circumference of the vein in the anastomosis area were markedly reduced with thickening of the vein wall, but no thrombi were observed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권6호
• /
• pp.731-737
• /
• 1999

This paper describes the path tracking control for a mobile robot which has two casters at the front and rear to keep balance and two driving wheels on the left and right sides of its body. Power wheeled steering method is adapted to control heading of the robot. It is very difficult to find appropriate feedback gains when linear regulator control scheme is adapted to path tracking con-trol of this type of robot. Therefore in this paper we propose the path tracking control algorithm using the fuzzy logic control scheme for this type of root. Simulation to prove the validity of the proposed two algorithms is performed. The results are reported as last part in this paper.

• Animal cells and systems
• /
• 제6권1호
• /
• pp.35-40
• /
• 2002

Two species of the genus Burmoniscus Collinge, 1914 (Philosciidae), B. philippinensis and B palawanensis from Palawan Island, the Philippines are described as new. In the family Philosciidae, only a single species, Pseudo-typhloscia alba (Dollfus, 1898), has been recorded from the Philippines. Two species of the genus Burmoniscus Collinge, 1914 (Philosciidae), B. philippinensis and B. palawanensis from Palawan Island, the Philippines are described as new. B. philippinensis is distinguished from its congeners by the shape of telson with straight sides and slightly protruding distal part with acute apex, while B. palawanensis by its peculiar shape of male pleopod 1 endopod.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2002년도 춘계학술대회
• /
• pp.91-97
• /
• 2002

In this thesis presents line balancing problems of two-sided and mixed model assembly line widely used in practical fields using genetic algorithm for reducing throughput time, cost of tools and fixtures and improving flexibility of assembly lines. Two-sided and mixed model assembly line is a special type of production line where variety of product similar in product characteristics are assembled in both sides. This thesis proposes the genetic algorithm adequate to each step in tow-sided and mixed model assembly line with suitable presentation, individual, evaluation function, selection and genetic parameter. To confirm proposed genetic algorithm, we apply to increase the number of tasks in case study. And for evaluation the performance of proposed genetic algorithm, we compare to existing algorithm of one-sided and mixed model assembly line. The results show that the algorithm is outstanding in the problems with a larger number of stations or larger number of tasks.

• Steel and Composite Structures
• /
• 제22권1호
• /
• pp.79-89
• /
• 2016

Cold formed steel shear panel is one of the main components to bearing lateral load in low and mid-rise cold formed steel structures. This paper uses finite element analysis to evaluate the stiffness, strength and failure mode at cold formed steel shear panels whit steel sheathing and nonlinear connections that are under monotonic loading. Two finite element models based on two experimental model whit different failure modes is constructed and verified. It includes analytical studies that investigate the effects of studs and steel sheathing thickness changes, fasteners spacing at panel edges, one or two sides steel sheathing and height-width ratio of wall on the lateral load capacity. Dominant failure modes include buckling of steel sheet, local buckling in boundary studs and sheet unzipping in the bottom half of the wall.

• 대한안전경영과학회지
• /
• 제4권2호
• /
• pp.83-101
• /
• 2002

In this thesis presents line balancing problems of two-sided and mixed model assembly line widely used in practical fields using genetic algorithm for reducing throughput time, cost of tools and fixtures and improving flexibility of assembly lines. Two-sided and mixed model assembly line is a special type of production line where variety of product similar in product characteristics are assembled in both sides. This thesis proposes the genetic algorithm adequate to each step in tow-sided and mixed model assembly line with suitable presentation, individual, evaluation function, selection and genetic parameter. To confirm proposed genetic algorithm, we apply to increase the number of tasks in case study. And for evaluation the performance of proposed genetic algorithm, we compare to existing algorithm of one-sided and mixed model assembly line. The results show that the algorithm is outstanding in the problems with a larger number of stations or larger number of tasks.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.479-480
• /
• 2006

We have studied the viewing angle control of a twist nematic liquid crystal display (TN-LCD). The TN-LCD exhibits a bad image quality along vertical direction, due to characteristics such as low contrast ratio and gray scale inversion. The proposed new TN-LCD has the function of switching between the wide viewing mode and narrow viewing angle mode using two tilted LC layers at both sides of a TN-cell. Tilt angles of the two LC layers, $14^{\circ}$ and $60^{\circ}$ were required in both wide viewing angle and narrow viewing angle modes, respectively.

• International journal of advanced smart convergence
• /
• 제10권4호
• /
• pp.172-182
• /
• 2021

We look at the business model development of a fan community platform 'Weverse' from two-sided platform (TSP) to multi-sided platform (MSP) and investigate its platform business model. From the Rocket Model's theoretical perspective, the results reveal that Weverse firstly focuses on inviting artists as many as possible starting from BTS, then attracts new artists' fans naturally. For success of this TSP, it forms MSP, 'Weverse Shop' to meet two sides' relevant needs timely and filtered. In third stage of connection, various partnerships are attempted in terms of open platform strategies. For instance, by combining 'VLive' and Weverse, Naver's fan platform business is transferred to Weverse. For core transaction through direct and indirect monetization, several cobranding activities are tried. Lastly, regarding optimization, newly born Weverse being launched in the first half of 2022 is supposed to create further synergies with Naver's R&D capabilities in data, AI, and other technologies like metaverse platform 'ZEPETO' which already sells clothing items of Weverse artists.