• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.7-12
• /
• 2007

본 연구에서는 선행연구에 의해 설계되어진 20인승급 소형 위그선의 주날개 구조를 엔진 및 프로펠러에 의해 유발되는 진동을 가진력으로 하여 강제진동 해석을 수행하였다. 대상 위그선은 왕복엔 진을 날개에 장착하여 프로펠러에 의한 추력으로 비행하며， 미는 형식(Pusher Type)의 엔진 배열을 취하고 있다. 유한요소해석을 위해서 구조해석 상용프로그랩인 MSC/NASTRAN을 사용하였으며， 엔진의 주요 진동 특성인 X-mode 와 Y-mode 그리고 Z-mode를 특정 가진 주파수로 하여 주파수 응답 해석을 수행하였고, 엔진의 추력방향 진동 모드인 X-mode를 프로펠러의 회전에 의해 진동을 수반하는 가진 추력으로 가정하여 과도응답 해석을 수행한 후 날개의 진동 특성을 살펴보았다.

• 식물조직배양학회지
• /
• 제27권2호
• /
• pp.89-94
• /
• 2000

큰용담의 기내배양에서 EMS를 처리한 경우 돌연변이체를 선발하기에 최적의 농도는 200 uM이며 농도가 높아질수록 생존률이 저하되었으며 줄기는 가늘고 나선형으로 꼬이고 백화현상이 가장 심하였다. Colchicine의 경우 30일 까지는 전 농도에서 84~97%의 높은 생존률을 보였으나 60일 이후에는 농도에 따라 생존률의 차이가 보였다 변이체가 단간이며 왜소하였다. MNU의 경우 10 $\mu$M에서 200$\mu$M까지는 89~97%의 높은 생존률을 보이다가 500$\mu$M이상에서는 18.2%로 급격한 감소를 보였으며 변이체의 잎의 형태가 도피침형에서 주걱형과 도란형으로 변형된 것과 잎의 청색에서 진보라색으로 변형된 2가지 type의 변이체가 형성되었다. Sodium azide를 처리한 경우 적정농도는 80$\mu$M였고 60일 배양 시 전반적으로 30~50%의 균일한 생존률을 보였고 초장이 아주 작고 다분얼성 변이체를 형성하였다. 형성된 shoot의 길이를 비교하여 보면 sodium azide, MNU의 경우에서는 약 1.0cm내외인 반면 colchicine의 경우 0.5 cm내외로 저조한 길이 생장을 보였다. RAPD에 의한 돌연변이체의 확인에서 농도가 가장 높은 500$\mu$M에서 변이 band가 관찰되었으며 돌연변이 계통에서 새로 형성된 band의 수는 MNU에서 2개 NaN3에서 1개로 전부 3개 (8.1%)의 변이 band가 나타났다.

• 복식
• /
• 제58권10호
• /
• pp.164-172
• /
• 2008

Soochonri tombs are assumed to be of the Baekje Kingdom in the early 5th century. We have examined 12 artifacts and 24 textiles in the four tombs. Along with hemp textiles, silk and embroidery threads were found In the Soochonri tombs. Within the hemp textiles both hemp and ramie were made using s-twist threads and the thread count distribution is calculated to be $8.5{\sim}15.5/cm^2$. Taffeta, one of the silk, can be categorized in to four types. First, the plain woven silk was made with warp and weft of the same thickness. The rates of thread count are also similar. Secondly the warp and weft are of the same thickness but has more spaces between threads. Third, the type of warp and weft is different in thickness, the thicker thread woven in the same direction. Lastly, a textile was woven with spaces the same as the width of the reed mark in every two warps. There were five compound weave found. Among them one was made with non-twisted thread for warp and s-twist thread for weft. One plain braiding with apparent spaces between threads were found. All three of the twining were made with wefts thicker than warps, barely showing the warps as a result. Textiles of the Soochonri tombs are the oldest of the Baekje Kingdom studied by far and therefore important artifacts of the Baekje Kingdom. These textiles are similar to those found in the King Muryeong's Tomb and tombs of Gaya and Shilla.

• 대한수학회지
• /
• 제35권2호
• /
• pp.331-340
• /
• 1998

We define the spherical non-commutative torus $L_{\omega}$/ as the crossed product obtained by an iteration of l crossed products by actions of, the first action on C( $S^{2n＋l}$). Assume the fibres are isomorphic to the tensor product of a completely irrational non-commutative torus $A_{p}$ with a matrix algebra $M_{m}$ ( ) (m > 1). We prove that $L_{\omega}$/ $M_{p}$ (C) is not isomorphic to C(Prim( $L_{\omega}$/)) $A_{p}$ $M_{mp}$ (C), and that the tensor product of $L_{\omega}$/ with a UHF-algebra $M_{p{\infty}}$ of type $p^{\infty}$ is isomorphic to C(Prim( $L_{\omega}$/)) $A_{p}$ $M_{m}$ (C) $M_{p{\infty}}$ if and only if the set of prime factors of m is a subset of the set of prime factors of p. Furthermore, it is shown that the tensor product of $L_{\omega}$/, with the C＊-algebra K(H) of compact operators on a separable Hilbert space H is not isomorphic to C(Prim( $L_{\omega}$/)) $A_{p}$ $M_{m}$ (C) K(H) if Prim( $L_{\omega}$/) is homeomorphic to $L^{k}$ (n)$\times$ $T^{l'}$ for k and l' non-negative integers (k > 1), where $L^{k}$ (n) is the lens space.$T^{l'}$ for k and l' non-negative integers (k > 1), where $L^{k}$ (n) is the lens space.e.

• 산업공학
• /
• 제21권4호
• /
• pp.411-417
• /
• 2008

An impeller is a type of high-speed rotor that is used to compress or transfer fluid under high-speed and pressure at high temperatures. The impeller is composed of an axial hub and several blades attached along the hub. The weight and shape of an impeller must be balanced, because their imbalances can cause noise and vibration, which can lead to the breakage of the impeller blades during operation. Thus, the hub and blades of an impeller are commonly machined in a 5-axis NC machine to obtain qualified surfaces. The impeller machining strategy or process plan can not be easily obtained due to the complex, overlapped and twisted shapes of impeller blades. Skillful machining process planners may generate appropriate machining strategies based on their experiences and floor data. However, in practice most shop floor data for the impeller machining is not well-structured such that it does not effectively provide a process planner with information for machining strategies and/or process plans. This paper reports the development of a case-based machining strategy support system (CBMS) that employs case-based reasoning to obtain the machining strategy of an impeller by using the existing machining strategies of the shop floor. The CBMS generates impeller machining strategies through a stepwise reasoning process considering the similarity features between the blade shapes and machining regions. A case study is provided to demonstrate that CBMS can generate useful machining strategies facilitating process planners. The developed system can simulate the tool paths of impeller machining and runs on the web.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.300-300
• /
• 2008

In this study, the advanced DuoPIGatron-type ion beam (IB) system was applied to inorganic thin film for aligning liquid crystal (LC). LC alignment on $Ta_2O_5$ via IB irradiation was embodied. As a result of IB irradiation, the homogeneously aligned liquid crystal display (LCD) on $Ta_2O_5$ was observed with low pretilt angles. The $Ta_2O_5$ were deposited on indium-tin-oxide coated Coming 1737 glass substrates by rf magnetron sputtering at $200^{\circ}C$. The deposition process resulted in forming very uniform thin film on glass substrates without any defects. To confirm the application of the inorganic alignment on modem display optical devices, we fabricated twisted nematic LCD and measured optical property and response time. As a result of the experiment, the electro optical characteristics of the LCD fabricated by using IB irradiation on $Ta_2O_5$ alignment layer were similar with the other LCD fabricated by using rubbing process.

• BMB Reports
• /
• 제53권3호
• /
• pp.160-165
• /
• 2020

The root meristem of Arabidopsis thaliana is protected by the root cap, the size of which is tightly regulated by the balance between the formative cell divisions and the dispersal of the outermost cells. We isolated an enhancer-tagged dominant mutant displaying the short and twisted root by the overexpression of ZINC-FINGER OF ARABIDOPSIS THALIANA1 (ZAT1) encoding an EAR motif-containing zinc-finger protein. The growth inhibition by ZAT1 was shared by ZAT4 and ZAT9, the ZAT1 homologues. The ZAT1 promoter was specifically active in the outermost cells of the root cap, in which ZAT1-GFP was localized when expressed by the ZAT1 promoter. The outermost cell-specific expression pattern of ZAT1 was not altered in the sombrero (smb) or smb bearskin1 (brn1) brn2 accumulating additional root-cap layers. In contrast, ZAT4-GFP and ZAT9-GFP fusion proteins were distributed to the inner root-cap cells in addition to the outermost cells where ZAT4 and ZAT9 promoters were active. Overexpression of ZAT1 induced the ectopic expression of PUTATIVE ASPARTIC PROTEASE3 involved in the programmed cell death. The EAR motif was essential for the growth inhibition by ZAT1. These results suggest that the three related ZATs might regulate the maturation of the outermost cells of the root cap.

• ALGAE
• /
• 제32권3호
• /
• pp.171-179
• /
• 2017

The strictly freshwater red algal order Batrachospermales has undergone numerous taxonomic rearrangements in the recent past to rectify the paraphyly of its largest genus Batrachospermum. These systematic investigations have led to the description of new genera and species as well as re-circumscription of some taxa. Specimens collected from two locations in the southeastern USA were initially identified as being allied to Batrachospermum sensu lato, but could not be assigned to any recognized species. Representative rbcL (plastid) and COI-5P (mitochondrion) sequences showed these specimens to be similar to each other and not closely matching the previously published sequence data for other Batrachospermum taxa. Comparison of sequence variation and morphology with a broader range of batrachospermalean taxa resulted in the proposal of a new monotypic genus Lympha mucosa gen. et sp. nov. to accommodate these specimens. Lympha mucosa is sister to members of a newly described genus Volatus, but the two genera are easily distinguished based on straight versus curved, twisted or spirally coiled carpogonial branch, respectively. This new taxon has morphological similarities to Batrachospermum sections Turfosa and Virescentia, but can be differentiated based on genetic divergence in rbcL and COI-5P as well as a combination of morphological characters: dense, compressed whorls, axial carposporophytes with a single type of gonimoblast filament; cortication of the main axis closely appressed; and short, straight carpogonial branch arising from the pericentral cell and carpogonia with unstalked, lanceolate trichogynes. This new taxon adds to the freshwater red algal diversity of the southeastern USA, a region already known for biodiversity and high endemism of the aquatic flora and fauna. It is also a relevant new addition to the taxonomic knowledge of the freshwater red algal Batrachospermales.

• Fibers and Polymers
• /
• 제7권3호
• /
• pp.317-322
• /
• 2006

Reduction of yam hairiness by nozzles in ring spinning and winding is a new approach. Simulation of the airflow pattern inside the nozzles provides useful information about actual mechanism of hairiness reduction. The swirling air current inside the nozzles is capable of wrapping the protruding hairs around the yam body, thereby reducing yam hairiness. Since production rate of winding is very high and the process itself increases yarn hairiness any method to reduce the hairiness of yarns at this stage is a novel approach. A CFD (computational fluid dynamics) model has been developed to simulate the airflow pattern inside the nozzles using Fluent 6.1 software. In this study, both S- and Z-type nozzles having an axial angle of 500 and diameter of 2.2 mm were used for simulation studies. To create a swirling effect, four air holes of 0.4 mm diameter are made tangential to the inner walls of the nozzles. S- and Z-twisted yams of 30 tex were spun with and without nozzles and were tested for hairiness, tensile and evenness properties. The total number of hairs equal to or exceeding 3 mm (i.e. the S3 values) for yam spun with nozzle is nearly 49-51 % less than that of ring yams in case of nozzle-ring spinning, and 15 % less in case of nozzle-winding, while both the yarn types show little difference in evenness and tensile properties. Upward airflow gives best results in terms of hairiness reduction for nozzle-ring and nozzle wound yams compared to ring yarns. Yarn passing through the centre of the nozzle shows maximum reduction in S3 values.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.1079-1082
• /
• 2015

통신선로설비 기술기준 제23조에서는 옥내통신선과 전선간 이격거리 기준을 제시하고 있으며 몇 가지 조건에 해당하는 경우에 한하여 예외 규정을 마련하고 있다. 하지만 동 기술기준의 제32조에서는 옥내통신선으로서 케이블 형태를 갖는 꼬임케이블, 광섬유케이블을 사용하도록 규정하고 있고 이는 이격거리 기준의 예외 조건과 상충하는 문제점을 갖고 있다. 또한 이격거리 기준의 예외 조건 중 최대 15.4W의 PoE 공급 전력 기준을 최대 30W로 확대해야 할 필요성이 제기되고 있는 실정이다. 이에 본 논문에서는 국내외 관련 기술기준 및 표준 규격을 분석하여 보다 합리적인 옥내통신선과 전선간 이격거리 기술기준의 개선 방안을 제시하고자 한다.