• 대한조선학회논문집
• /
• 제49권5호
• /
• pp.440-446
• /
• 2012

A twisted cylinder has been newly designed by rotating the elliptic cross section along the spanwise direction in order to reduce the drag and vorticies in wake region. The flow around the twisted cylinder at a subcritical Reynolds number (Re) of 3000 is investigated to analyze the effect of twisted spiral pattern on the drag reduction and vortex suppression using large eddy simulation (LES). The instantaneous wake structures of the twisted cylinder are compared with those of a circular and a wavy cylinder at the same Re. The shear layer of the twisted cylinder covering the recirculation region is more elongated than that of the circular and the wavy cylinder. Successively, vortex shedding of the twisted cylinder is considerably suppressed, compared with those of the circular and the wavy cylinder. Consequently, the mean drag coefficient and the fluctuating lift of the twisted cylinder are less than those of the circular and the wavy cylinder.

• 대한조선학회논문집
• /
• 제57권2호
• /
• pp.96-103
• /
• 2020

The new geometric disturbance is proposed to control the flow around the bluff body. The new geometry is characterized by the variable pitch which is applied on the Helically Elliptic Twisted (HET) cylinder. The performance of the HTE geometry as a biomimetic passive flow control was confirmed by Jung and Yoon (2014). The Large Eddy Simulation (LES) is used for the evaluation of the flow control performance of the Variable Pitch HTE (VPHTE) cylinder at Reynolds number (Re) of 3000 corresponding to the subcritical regime. The circular and HTE cylinders are also considered to compare the performance of the VPHTE cylinder at the same Re. The VPHTE cylinder gives the smallest values of the force coefficients than the circular and HTE cylinders. The drag and lift coefficients of the VPHTE cylinder are about 15.2% and 94.0% lower than those of the circular cylinder, respectively. Especially, the VPHTE cylinder achieves about 2.3% and 30.0% reduction of the drag coefficient and the root mean square of the lift coefficient than the HTE cylinder, respectively. Furthermore, The VPHTE cylinder forms more elongated and stabilized separated shear layer than the circular cylinder, which supports the reduction of the force coefficients.

• 한국해양공학회지
• /
• 제29권1호
• /
• pp.9-15
• /
• 2015

We investigated the Reynolds number effects on the flow over a twisted offshore structure in the range of 3×10³≤ Re ≤ 1 × 10⁴. To analyze the effect of the twisted surface treatment, a large eddy simulation (LES) with a dynamic subgrid model was employed. A simulation of the cylindrical structure was also carried out to compare the results with those of the twisted offshore structure. As Re increased, the mean drag and lift coefficient of the twisted offshore structure increased with the same tendency as those of the cylindrical structure. However, the increases in the mean drag and lift coefficient of the twisted offshore structure were much smaller than those of the cylindrical structure. Furthermore, elongated shear layer and suppressed vortex shedding from the twisted offshore structure occurred compared to those of the cylindrical cylinder, resulting in a drag reduction and suppression of the vortex-induced vibration (VIV). In particular, the twisted offshore structure achieved a significant reduction of over 96% in VIV compared with that of the cylindrical structure, regardless of increasing Re. As a result, we concluded that the twisted offshore structure effectively controlled the flow structures with reductions in the drag and VIV compared with the cylindrical structure, irrespective of increasing Re.

• 설비공학논문집
• /
• 제23권10호
• /
• pp.670-677
• /
• 2011

Direct numerical simulation are performed in order to investigate the effect of the circular cylinder shape on the forced convection around a circular cylinder at the Reynolds number of 300 and Prandtl number of 0.71. Three-dimensional characteristics of fluid flow and heat transfer around the smooth, wavy and torsional cylinders are investigated. A wavy cylinder has the sinusoidal variation in the cross sectional area along the spanwise direction with the wave length of ${\pi}/3$ and wavy amplitude of 0.1. A torsional cylinder has the twisted elliptic cross section with a torsional period of ${\pi}/2$ and an axis ratio of 1.35 corresponding to the major axis of 1.15 and the minor axis of 0.85. The value of time-and surface-averaged drag coefficient for the smooth cylinder is similar to that for the wavy cylinder, but larger than that for the torsional cylinder. The time and surface-averaged lift coefficient for the smooth cylinder is larger than that for the wavy and torsional cylinders. The time-averaged local heat transfer rate for the wavy and torsional cylinders shows different distribution along the circumferential direction, compared to that for the smooth cylinder because of the shape change in the spanwise direction for the cases of the wavy and torsional cylinders.

• Structural Engineering and Mechanics
• /
• 제68권1호
• /
• pp.17-38
• /
• 2018

In this paper, we compare and assess the performance of the standard 3- and 6-node MITC shell elements (Lee and Bathe 2004) with the recently developed MITC triangular elements (Lee et al. 2014, Jeon et al. 2014, Jun et al. 2018) which were based on the partitions of unity approximation, bubble node, or both. The convergence behavior of the shell elements are measured in well-known benchmark tests; four plane stress tests (mesh distortion test, cantilever beam, Cook's skew beam, and MacNeal beam), two plate tests (Morley's skew plate and circular plate), and six shell tests (curved beam, twisted beam, pinched cylinder, hemispherical shells with or without hole, and Scordelis-Lo roof). To precisely compare and evaluate the solution accuracy of the shell elements, different triangular mesh patterns and distorted element mesh are adopted in the benchmark problems. All shell finite elements considered pass the basic tests; namely, the isotropy, the patch, and the zero energy mode tests.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.146-149
• /
• 2004

We have studied a liquid crystal (LC) mode (named locked super homeotropic (LSH)) in which the LCs aligned homeotropically are locked by surrounding walls such as cubic, hexagonal and cylinder. In the device, the vertically aligned LCs tilt down symmetrically around the center of the cell when a voltage is applied and thus it exhibits wide viewing angle. The structure of this LSH mode is suitable for large-sized display panels. since the LCs are locked in micro domains the LCs do not flow to the bottom of the panel by gravity. This mode is applicable to achieve high performance TFT-LCD TV because of high performance characteristics such as high contrast, high brightness, wide-viewing angle.

• 한국가스학회지
• /
• 제25권2호
• /
• pp.22-27
• /
• 2021

이 논문은 LPG 자동차용 엔진의 고장사례를 연구하여 자동차 생산에 활용함이 목적이다. 첫번째 사례는 엔진의 실린더헤드를 분해하여 확인한 결과 실린더 헤드의 점화플러그가 조립되는 나사부 마멸때문에 점화플러그의 불꽃이 누설되어 출력이 떨어지면서 엔진의 부조화 현상이 가끔 유발되는 것을 발견하였다.. 두 번째 사례는 캠샤프트의 위치와 크랭크 샤프트 위치를 맞춘 타이밍 마크가 0.5칸 틀어져 엔진의 부조화 현상이 발생된 것을 확인되었다. 세 번째 사례는 실린더 헤드를 분해하여 확인한 결과, 실린더 헤드에 제거되지 못한 이물질이 3번 흡기포트에서 공기 흐름에 따라 이동하다가 흡기밸브의 닫힘시기를 원활하지 못하여 하여 고장이 발생된 것을 확인하였다. 따라서, 자동차 관리자는 철저하게 점검해야 하고, 자동차 생산자는 철저한 품질확보를 통해 고장의 원인을 제거해야 할 것으로 판단된다.

• 복식
• /
• 제52권3호
• /
• pp.149-160
• /
• 2002

Symbolism found in a certain object inherits characteristics from the culture that contains the objects. The purpose of this study was investigate the formative beauty of Korean trousers twisted the pieces together based on the way of Korean thinks and the Topology. The shape is formed by cutting from the fabric. From the perspective of semiology, the fabric and the pattern shape correspond to ground and figure. Ground and figure are identical with the principle of the whole and the part, which is the same in Korea, China, and the West. But In Korea, the 3-dimensional garment is made by adding a twist. This is very important and defines the difference in the way of thinking and topology. Korean trousers consist of three parts : Hury, Marupok, and Sapok. The small Sapok can be made by removing the Marupok and large Sapok (figure) from the fabric (ground) when making Korean trousers. A Mobius strip is made when the large Sapok is adjoined with the small Sapok by reversing the small Sapok, making a 180$^{\circ}$twist and then stitching together. The theory of Mobius strip can be applied in Joining Bajiburi. thus when the trousers are completed the Klein's bottle is seen because of the 2 existing Mobius strop. The theory of Mobius strip can be applied in Joining Bajiburi, thus when the trousers are completed the Klein's bottle is seen because of the 2 existing Mobius strip. Hury is cylinder while the small and large Sapok make up the Mobius strip. As a result, Mobius strip, Kleins'bottle, protective plan can be applied in cutting Hanbok used in the countryside, so I have come to see that the traditional Korean way of thinking is closely related to the theory of topological.