• Steel and Composite Structures
• /
• 제2권4호
• /
• pp.297-314
• /
• 2002

An energy method of analysis is presented which can be used to study the inelastic lateral-distortional buckling of hot-rolled I-sections continuously restrained at the level of the tension flange. The numerical modelling leads to the incremental and iterative solution of a fourth-order eigenproblem, with very rapid solutions being obtainable, so as to enable a study of the factors that influence the strength of continuously restained I-beams to be made. Although hot-rolled I-sections generally have stocky webs and are not susceptible to reductions in their overall buckling loads as a result of cross-sectional distortion, the effect of elastic restraints, particularly against twist rotation, can lead to buckling modes in which the effect of distortion is quite severe. While the phenomenon has been studied previously for elastic lateral-distortional buckling, it is extended in this paper to include the constitutive relationship characteristics of mild steel, and incorporates both the so-called 'polynomial' and 'simplified' models of residual stresses. The method is validated against inelastic lateral-torsional buckling solutions reported in previous studies, and is applied to illustrate some inelastic buckling problems. It is noted that over a certain range of member slenderness the provisions of the Australian AS4100 steel standard are unconservative.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.504-507
• /
• 2002

We investigated electro-optic and ionic properties of twisted nematic cells by using control of chiral pitch. These properties are observed in practical experiment and simulations. C-V and V-T curve characteristics were obtained from three types of cells with d/p. It is shown that d/p ratio of short cells exhibit faster response time improved by 20% than normal cell. Also, inter-gray response time is improved each rise time and decay time. And, the increase of saturation voltage is happened because of the small twist angel change from initial state at high voltage near 5V. To compensate for longer black level tail, gamma curve index was varied from g = 2.2 to g = 2.7 in module status. Additionally, adding chiral dopant into TN cells improved ionic characteristics such as increasing VHR, Ion density and DC Hysteresis were decreased..

• 한국식품과학회지
• /
• 제37권3호
• /
• pp.334-338
• /
• 2005

본 연구는 식품병마개 PVC 가스켓과 식품에 함유된 SEM을 효과적으로 분석하기 위해 연구했다. SEM은 발포제로 사용되는 ADC의 열분해산물로 알려졌다. 그러나 SEM은 분자량이 낮으며 ultraviolet light나 fluorescence에 활성을 갖지 않는다. 따라서 2-NBA-SEM으로 유도체화하여 HPLC triple column system으로 분석했을 때 상관관계는 0.9997이상이며 검출한계는 0.48ng/g으로 나타났다. 식품병마개 PVC 가스켓에서 SEM의 검출율은 77.08%로 나타났으며, 유통중인 병마개 PVC 가스켓에서 SEM은 812.20-5771.30ng/g 수준이였다. 그리고 회수율은 PVC 가스켓과 식품에서 각각 92.12-98.71%와 83.45-97.33%로 측정되었다.

• 대한치과보철학회지
• /
• 제41권3호
• /
• pp.360-368
• /
• 2003

Statement of Problem: The residual monomer of denture base materials causes hypersensitivity on oral mucosa and intereferes with the mechanical properties of the cured resin. The amount of residual monomer is influenced by materials, curing cycle, processing method, and etc. Purpose: The aim of this study was to investigate the residual methyl methacrylate(MMA) content of injection molded denture base polymer, and to compare this with the self-cured resin and the conventional compression molded heat-cured resin. Materials and Methods: Disc shaped test specimens (50mm in diameter and 3mm thick) were prepared in a conventional flasking technique with gypsum molding. One autopolymerized denture base resins (Vertex Sc. Dentimex. Netherlands) and two heat-cured denture base resins (Vertex RS. Dentimex. Netherlands, Ivocap. Ivoclar Vivadent, USA) were used. The three types of specimens were processed according to the manufacturer's instruction. After polymerization, all specimens were stored in the dark at room temperature for 7 days. There were 10 specimens in each of the test groups. 3-mm twist drills were used to obtain the resin samples and 650mg of the drilled sample were collected for each estimation. Gas chromatography (Agillent 6890 Plus Gas Chromatograph, Agillent Co, USA) was used to determine the residual MMA content of 10 test specimens of each three types of polymer. Results: The residual monomer content of injection molded denture base resins was $1.057{\pm}0.141%$. The residual monomer content of injection molded denture base resins was higher than that of compression molded heat cured resin ($0.867{\pm}0.169%$). However, there was no statistical significant difference between two groups (p>0.01). The level of residual monomer in self cured resin($3.675{\pm}0.791$) was higher than those of injection molded and compression molded heat cured resins (p<0.01). Conclusion: With respect to ISO specification pass / fail test (2.2% mass fraction) of residual monomer, injection molding technique($1.057{\pm}0.141%$) is a clinically useful and safe technique in terms of residual monomer.

• The Korean Journal of Pain
• /
• 제33권1호
• /
• pp.48-53
• /
• 2020

Background: The aim of this study was to clarify the topographical relationship between the accessory nerve (AN) and transverse cervical artery (TCA) to provide safe and convenient injection points for AN blockade. Methods: This study included 21 and 30 shoulders of 14 embalmed Korean adult cadavers and 15 patients, respectively, for dissection and ultrasound (US) examination. Results: The courses of the TCA and AN in the scapular region were classified into four types based on their positional relationships. Type A indicated the nerve that was medial to the artery and ran parallel without changing its location (38%). In type B (38%), the nerve was lateral to the artery and ran parallel without changing its location. In type C (19%), the nerve or artery traversed each other only once during the whole course. In type D (5%), the nerve or artery traversed each other more than twice forming a twist. At the levels of lines I-IV, the nerve was relatively close to the artery (approximately 10 mm). TCAs were observed in all specimens around the superior angle of the scapula at the level of line II, whereas they were not found below line VI. In US images of the patients, the TCA was commonly observed at the level of line II (93.3%) where all ANs and TCAs were observed in cadaveric dissection. Conclusions: The results expand the current knowledge of the relation between the AN and TCA, and provide helpful information for selective diagnostic nerve blocks in the scapular region.

• 한국산학기술학회논문지
• /
• 제19권6호
• /
• pp.614-627
• /
• 2018

국내 도시철도 노선은 이용자의 접근을 편리하게 하기 위하여 주거단지 및 도심지 인근 지역에 시공되는 사례가 많다. 도시 인구 증가로 인하여 교통망 확충과 재건축 등이 지속적으로 이루어짐에 따라 도시철도 인접 지역 굴착이 불가피하며 굴착 시 발생하는 지반 응력 및 지하수위 변화는 도시철도 궤도틀림을 유발한다. 이에 본 논문에서는 삼차원 유한차분 해석 상용프로그램 FLAC3D를 이용하여 도시철도 인접지반 대규모 굴착 시 지하수위에 따른 굴착 부 벽체 수평변위 및 배면지반의 침하와 궤도틀림량 산정 후 이들의 상관관계를 분석하고 궤도틀림 및 지하 박스구조물 안정성 평가를 실시하였다. 그 결과 깊은 굴착 시 지하수위에 따른 궤간틀림은 매우 미소하게 발생하였으나 줄틀림 72.5%, 수평틀림 83.3%, 면틀림 61.9%, 평면성틀림 43.3%로서 상대적으로 큰 차이가 발생하는 것으로 나타났다. 또한, 흙막이 벽체의 최대 수평 변위 및 벽체 배면 침하 차는 각각 65.1%, 21.4%가 발생하는 것으로 나타났으며 지하수위가 지표면에 위치한 경우 지하 박스구조물의 인장 응력이 허용 기준을 초과하는 것으로 나타났다. 그러므로 도시철도 구조물에 인접하여 깊은 굴착이 시공된 경우 궤도틀림으로 인한 사고를 미연에 방지하기 위해 본 연구에서 수행한 삼차원 수치해석과 실시간 모니터링을 실시하는 것이 바람직하다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권10호
• /
• pp.4271-4274
• /
• 2014

The epithelial to mesenchymal transition (EMT) is a key step during embryonic morphogenesis and plays an important role in drug resistance and metastasis in diverse solid tumors. We previously reported that 48 h treatment of anti-cancer drug doxorubicin could induce EMT in human gastric cancer BGC-823 cells. However, the long term effects of this transient drug treatment were unknown. In this study we found that after 48 h treatment with $0.1{\mu}g/ml$ doxorubicin, most cells died during next week, while a minor population of cells survived and formed colonies. We propagated the surviving cells in drug free medium and found that these long term cultured drug survival cells (abbreviated as ltDSCs) retained a mesenchymal-like cell morphology, and expressed high levels of EMT-related molecules such as vimentin, twist and ${\beta}$-catenin. The expression of chromatin reprogramming factors, Oct4 and c-myc, were also higher in ltDSCs than parental cells. We further demonstrated that the protein level of p300 was upregulated in ltDSCs, and inhibition of p300 by siRNA suppressed the expression of vimentin. Moreover, the ltDSCs had higher colony forming ability and were more drug resistant when compared to parental cells. Our results suggested that an epigenetic mechanism is involved in the EMT of ltDSCs.

• Wind and Structures
• /
• 제22권4호
• /
• pp.455-476
• /
• 2016

In both structural and environmental wind engineering, the vertical variation of wind direction is important as it impacts both the torsional response of the high-rise building and the pedestrian level wind environment. In order to systematically investigate the vertical variation of wind directions (i.e., the so-called 'twist effect') induced by hills with idealized geometries, a series of wind-tunnel tests was conducted. The length-to-width aspect ratios of the hill models were 1/3, 1/2, 1, 2 and 3, and the measurements of both wind speeds and directions were taken on a three-dimensional grid system. From the wind-tunnel tests, it has been found that the direction changes and most prominent at the half height of the hill. On the other hand, the characteristic length of the direction change, has been found to increase when moving from the windward zone into the wake. Based on the wind-tunnel measurements, a descriptive model is proposed to calculate both the horizontal and vertical variations of wind directions. Preliminarily validated against the wind-tunnel measurements, the proposed model has been found to be acceptable to describe the direction changes induced by an idealized hill with an aspect ratio close to 1. For the hills with aspect ratios less than 1, while the description of the vertical variation is still valid, the horizontal description proposed by the model has been found unfit.

• 복식
• /
• 제58권1호
• /
• pp.9-16
• /
• 2008

Six of the Imdang tombs containing remains with imprints of ancient fabrics and textiles were investigated. Within the tombs, a total of 120 pieces of imprinted fabrics and textiles were investigated, all of which belongs to $5{\sim}6C$ Shilla period. All of the hemp textiles examined exhibited similar characteristics found in ancient hemp textiles: they were woven by plain weave technique with s-twist threads. The examined silk could be categorized into plain woven silk, cho, and double woven brocade, all of them made with non-twisted threads and degummed silk. The density of the plain woven silk ranged from 39 threads to 144 threads. Cho was also found, which showed similar characteristics to those of Gaya and Bakjae tombs. One piece of 2/1 twill weave on plain ground and 12 pieces of double woven brocade were found and their average density was $97.4{\times}33.4/cm$ with denser warp than weft. The various thickness of the threads were observed in the examined plain braid. The silk with twining technique showed thicker warp than weft. This is similar to the techniques of fabrics found in the King Muryeoung's Tomb of the Bakjae period. Fabrics with the purple-like color were observed in the some of the double woven brocades and also on the plain woven silk imprinted on the remains. The purple-like color was revealed to be purple with a tint of violet. The two tombs from which the imprinted fabrics with purple-like color were found belonged to top-class social level of the Shilla period, which informs that the purple color was used exclusively for the people of higher social status. The floss silk was found between the double woven brocade and plain woven silk of the belt, which is an important evidence that the floss silk was used for stuffing in the early 6th century.

• 한국학교보건학회지
• /
• 제10권2호
• /
• pp.193-211
• /
• 1997

The study was designed to gain necessary basic data in order to grasp the health knowledge, attitude, and practice level of students and teachers of elementary, middle and high schools. This study was conducted through interviews of 3,400 students and 1,022 teachers attending 14 different schools large, middle and small cities and rural towns during a period of nine months (from Oct. 2 1995 to Jun. 30 1996). By the results of this study, the recommendations can be summarized as follows: 1. A school health development committee should be established of 10 members: school health related teachers (physical trainers, nurses, and teachers in charge of health), parents, persons related to health administration, local medical doctors, and student reprensentatives in order to support and immplement school health development plans. 2. Like advanced countries, a health class of 2~4 hours should beplaced in middle and high schools. A nurse majoring in health from a university should be the teacher. 3. A curriculum of health should contain the following: education on health, sex, alcohol, tabacco, the misuse of the drugs, the structure and function of human body, the growth of the body, mental health, safety and emergency care, the prevention of disease, proper eating habits and nutrition, daily health life, family health education, society health, community health, environmental pollution and individual responsibility. 4. Create a school health promotion center, with a nurse's office, and a sports center which has health machines (bars, aerobics, training, twist machine, belt massage, running machine, bench press, chest waist, hack hip extension machine) as well as a physical strength measuring machine (muscular strength, alertness, flexibility, endurance, lung functions and so on), so that the teaching staff and students can use them and train their bodies. 5. Through a refresher education program, urge teachers to understand school health promotion services. 6. Regulate a standard and establish a system of monitoring the physical enviroment of the school (the height of desks and chairs, illumination facilities, ventilation facilities, safe drinking water). 7. Create a check list of health to evaluate improvement.