• 한국항해학회지
• /
• 제21권1호
• /
• pp.103-108
• /
• 1997

Mathematical model of maneuvering motion for a single-screw single-rudder ship is established and several applications to the special situations of maneuvering are attempted. While, the mathematical model for twin-screw twin-rudder ship is not presented so much, because that type of ship is not popular. Lee et al. have examined the characteristics of such ship by captive model tests in 1988, in Japan. This paper proposes new mathematical models for propeller effective wake (1 -${\omega}_p$) and effective neutral rudder angle ${delta}_R$ in the case of twin-screw twin-rudder ship. And some maneuvering motionse are calculated with proposed models and compared with exact simulations.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1996년도 The Korean Institute of Navigation 1996년도 한·중 국제학술 심포지움 및 추계학술발표회 논문집
• /
• pp.81-88
• /
• 1996

Mathematical model of maneuvering motion for a single-screw single-rudder ship is established and several applications to the special situations of maneuvering are attempted. While the mathematical model for twin-screw twin-rudder ship is not studied presented so much because that type of ship is not popular. Lee et al. have examined the characteristics of such ship by captive model tests in 1988 in Japan. This paper proposes new mathematical models for propeller effective wake (1-wp) and effective neutral rudder angle $\delta$R in the case of twin-screw twin-rudder ship. And some maneuvering motions are calculated with proposed models and compared with exact simulations.

• 대한조선학회논문집
• /
• 제58권6호
• /
• pp.407-414
• /
• 2021

The manoeuvrability of a ship with an unwanted heel angle due to a maritime accident is changed from the original characteristics. The purpose of this study is to quantitatively investigate the change in the manoeuvring performance of a twin-screw ship under various hee angles and speed conditions. A series of free running model test campaigns were performed in the Ocean Engineering Basin of Korea Research Institute of Ships & Ocean Engineering (KRISO) for a twin-screw car ferry vessel. Turning circle test and zig-zag 10/10 and 20/20 tests were carried out on the heel angles of 0, -10, and -19.5 degrees. In addition, two-speed conditions were considered to understand the effect of ship speed. In order to examine the effect of the bilge keel, a heel angle of -22 degree where the bilge keel is exposed outside the water surface, was considered. Finally, the change of manoeuvring characteristics according to the heel angle for a twin-screw and a single-screw vessel is discussed.

• 해양환경안전학회지
• /
• 제7권3호
• /
• pp.1-16
• /
• 2001

선박의 항행안전의 문제가 중요시됨에 따라 선박조종시뮬레이터를 이용한 운항훈련, 안전성 검토 등이 필요성이 중요하게 인식되고 있다. 또한 추진성능을 향상시킬 목적으로 다양한 선종이 출현되고 있고, 이에 따라 선박조종시뮬레이터의 개발에 있어서 선박의 데이터베이스는 필수적이라고 할 수 있다. 따라서 선종에 따른 수학모델을 각각 선박조종시뮬레이터에 적용시킴으로써 다양한 조종 시뮬레이션을 가능하게 할 수 있다. 본 논문에서는 우수한 추진성능을 목적으로 한 2축2타선박을 대상으로 조종운동 수학모델을 정식화하였다. 구체적으로 항만내에서의 저속시 조종운동을 구현할 수 있는 수학모델에 대해서 검토하였으며, 선체·프로펠러·타의 상호간섭에 대해서도 고려하였다. 또한, 수치시뮬레이션을 수행함으로써 2축2타선박의 기본적인 조종성능을 확인하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.392-405
• /
• 2014

SSPA experiences a growing interest in twin skeg ships as one attractive green ship solution. The twin skeg concept is well proven with obvious advantages for the design of ships with full hull forms, restricted draft or highly loaded propellers. SSPA has conducted extensive hull optimizations studies of LNG ships of different size based on an extensive hull data base with over 7,000 models tested, including over 400 twin skeg hull forms. Main hull dimensions and different hull concepts such as twin skeg and single screw were of main interest in the studies. In the present paper, one twin skeg and one single screw 170 K LNG ship were designed for optimally selected main dimension parameters. The twin skeg hull was further optimized and evaluated using SHIPFLOW FRIENDSHIP design package by performing parameter variation in order to modify the shape and positions of the skegs. The finally optimized models were then built and tested in order to confirm the lower power demand of twin skeg designed compaed with the signle screw design. This paper is a full description of one of the design developments of a LNG twin skeg hull, from early dimensional parameter study, through design optimization phase towards the confirmation by model tests.

• 대한조선학회논문집
• /
• 제41권1호
• /
• pp.15-22
• /
• 2004

Twin-skeg type stern shapes are recently adopted for very large commercial ships. However it is difficult to apply a CFD system to a hull form having twin-skeg, since grid topology around a twin-skeg type stern is more complicated than that of a conventional single-screw ship, or of an open-shaft type twin-screw ship with center-skeg. In the present study a surface mesh generator and a multi-block field grid generation program have been developed for twin-skeg type stern. Furthermore, multi-block flow solvers are utilized for potential and viscous flow analysis around a twin-skeg type stern The present computational system is applied to a 15,000TEU container ship with twin-skeg to prove the applicability. Wave profiles and wake distribution are calculated using the developed flow analysis tools and the results are compared with towing tank measurements.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2008년도 특별논문집
• /
• pp.84-89
• /
• 2008

Twin screw mode LNG Carrier is appeared. Because LNG CARRIER is larger recently. In this paper introduces maneuvering characteristics of Twin screw LNG CARRIER on single screw mode, which are found when the non-using screw mode is fixed or not(wind mill).

• 대한조선학회논문집
• /
• 제33권4호
• /
• pp.60-65
• /
• 1996

1축 1타선에 대한 조종운동 수학모델은 통상적인 경우 이미 확립되어 널리 사용되고 있다. 또한 저속이나 천수역에서의 조종운동계산에도 응용되고, 새로운 국면의 조종운동 해석에도 기존의 조종수학 모델이 근간이 되고 있다. 한편 2축 2타선과 같은 특수선형에 대해서는 Lee 등에 의한 상세한 구속모형시험 결과로 그 특성이 알려지게 되었고, 1축 1타를 기본으로 하는 기존 수학모델에 약간의 수정을 가함으로서 충분이 조종운동을 추정할 수 있음을 보였다. 본 논문에서는 2축 2타선에 대한 Propeller Effective Wake($1-w_p$)와 유효중립타각 (Effective Neutral Rudder Angle) ${\delta}_R$에 대한 추정모델을 제안하고, Hull의 유체력에 관해서도 Inoue의 추정식을 사용하여, 초기설계단계에서 선박의 주요치수, Propeller 및 타 제원만으로서 개략적인 2축 2타선의 조종운동 계산을 가능하도록 하였다. 이 추정법에 의한 조종운동 계산결과를 엄밀한 구속모형 시험 Data에 의한 계산과 비교하여, 본 논문에서 제안된 추정법의 유용성을 검증하였다.

• 대한조선학회논문집
• /
• 제54권2호
• /
• pp.161-169
• /
• 2017

Recently, ship owners have been requiring the assessment of the maneuverability of twin-screw ships under mechanical failures. Because this kind of assessment has not yet been conducted, it is necessary to study the types of machinery failures that can significantly affect the maneuverability of a ship, and to construct a procedure to simulate the maneuvering behavior under such failures. In this paper, the sole focus is the steering system failure from among the variety of failure types, and the maneuvering behavior of the ship under the single rudder failure is simulated for an investigation of the unique characteristics. First, the mathematical model for the twin-screw container ship is verified by comparing the simulated results for the $35^{\circ}$ turning test, $10^{\circ}/10^{\circ}$ zigzag test, and $20^{\circ}/20^{\circ}$ zigzag test under the normal operating condition with those obtained from free running model tests. After the IMO maneuvering tests are additionally simulated under the single rudder failure, the results are reviewed to investigate the maneuvering characteristics that are due to the failure. Further, the $35^{\circ}/35^{\circ}$ zigzag test and the $35^{\circ}$ turning test are simulated to additionally investigate the effects of the single rudder failure on the steering and turning abilities.

• 대한조선학회논문집
• /
• 제54권3호
• /
• pp.204-214
• /
• 2017

Recently, ship owners have been requiring the assessment of the maneuverability of a twin-screw ship under machinery failures. In this paper, we are only focused on the propulsion failure among propulsion failure, power supply failure, steering system failure etc. First of all, the mathematical model for the twin-screw 174K LNGC is verified by comparing the simulated results for $35^{\circ}$ turning test, $10^{\circ}/10^{\circ}$ zigzag test and $20^{\circ}/20^{\circ}$ zigzag test under normal operating condition and those obtained from free running model tests. And, sea trial results of 216K LNGC under single propeller failure are compared with those of 174K LNGC under identical condition to verify the proposed method to predict maneuverability under single propeller failure. After the straight line maneuver is simulated under the single propeller failure, the speed and equilibrated heading and rudder deflection angles at steady state are predicted. After the IMO maneuvering tests are simulated under the single propeller failure, the results are reviewed to investigate the maneuvering characteristics due to the failure.