• 디자인학연구
• /
• 제19권1호
• /
• pp.329-334
• /
• 2006

현대는 정치, 경제, 문화적으로 점차 국제화되어짐에 따라 내 외국인 관광객의 증가에 따른 관광산업의 중요성과 그 역할이 점차 부각되어지고 있다. 그 가운데 부산은 APEC 정상회의, 부산국제영화제(PIFF) 등의 대규모 국제 행사를 통해 국제적 관광도시를 지향하고 있으며, 이에 걸맞는 우리 고유의 문화적 특성을 마련할 필요성이 있다. 특히 호텔은 관광객들에게 우리 고유의 문화를 체험할 수 있는 장소를 제공하는 매개체적 역할을 한다. 그 중에서도 부산 중구에 위치한 코모도호텔은 한국적 외양과 의장의 건축적 요소를 갖추고 있지만 객실의 인테리어 디자인에는 한국적 요소가 적용되지 못한 문제점을 가지고 있다. 이러한 코모도호텔의 객실을 한국적 전통요소를 적용하여 리모델링함으로써 내 외국인 관광객들이 우리 고유의 문화를 친숙하게 느낄 수 있도록 하였다. 또한 우리의 문화를 지속적으로 보존, 계승, 발전시켜 세계적인 문화로 거듭날 수 있도록 하고자 하였다. 대상 객실은 스텐다드 더블, 디럭스 트윈, 세미 스위트 온돌룸의 세 가지 타입의 객실을 선정하고, 한국의 전통적 조형요소의 현대성과 전통성을 다양하게 적용한 객실 인테리어 리모델링 디자인을 제안하였다.

• 한국세라믹학회지
• /
• 제19권2호
• /
• pp.133-138
• /
• 1982

Two kinds of clinker liquid melts, one containing 2.0% of $K_2O$ and the other without $K_2O$, were prepared with the similar composition as those developed during the firing of portland cement clinker. One portion of melt was quenched and found to consist of glass together with traces of proto-$C_3A$, and the other portion was allowed to cool spontaneously to crystallize $C_3A$ and calciumferrite well. The product obtained by crystallization of the melt without $K_2O$showed cubic $C_3A$, while orthorhombic $C_3A$ was formed from the crystallized product containing $K_2O$. Studies on the hydration behavior of the samples made from the melts with 30% of gypsum were carried out for 24 hours by observation at regular intervals ettringite, monosulphate hydrates and gypsum which were formed or consumed during hydration. The samples without $K_2O$ in the melts were hydrated wth addition of proper amount of $K_2SO_4$ in the water for hydration. Hydration behavior of glassified $C_3A$ showed that it has low reactivity relative to crystallized $C_3A$, and also hydration reactivity of orthorhombic $C_3A$ was much lower than that of cubic $C_3A$ in 60 minutes. Potassium sulphate in the solution reduced the hydration reactivity of $C_3A$ . Evolution peaks of hydration heat examined by twin-type conduction micro-calorimeter showed that glassified $C_3A$ without $K_2O$ had secondary peak after 9 hours and $C_3A$ containing $K_2O$ after 12 hours. When crystallized $C_3A$ was hydrated, initial peaks of hydration heat were considerably high and there was no secondary peak for cubic $C_3A$ but the secondary peak of orthorhombic $C_3A$ appeared after 4 hours.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권1호
• /
• pp.36-42
• /
• 2013

The average twin lambing rate of Bayanbulak sheep is 2% to 3%. However, a flock of sheep with a close genetic relationship and an average of 2 to 3 lambs per birth has been found recently. To determine the major genes controlling the prolificacy of the flock in the present study, the flock was designated A while 100 normal Bayanbulak sheep were randomly selected to comprise the control flock B. Ligase detection reaction method was applied to detect and analyze the 10 mutational loci of the 3 candidate prolificacy genes including bone morphogenetic protein type I receptors, bone morphogenetic protein 15, and growth differentiation factor 9. The 10 mutational loci are as follows: FecB locus of the BMPR-IB gene; $FecX^I$, $FecX^B$, $FecX^L$, $FecX^H$, $FecX^G$, and $FecX^R$ of the BMP15 gene; and G1, G8, and FecTT of the GDF9 gene. Two mutations including BMPR-IB/FecB and GDF9/G1 were found in Bayanbulak sheep. Independence test results of the two flocks demonstrate that the FecB locus has a significant effect on the lambing number of Bayanbulak sheep. However, the mutation frequency of the G1 locus in GDF9 is very low. Independence test results demonstrate that the GDF9 locus does not have a significant impact on the lambing performance of Bayanbulak sheep. Among the 10 detected loci, BMPR-IB/FecB is the major gene that influences the high lambing rate of Bayanbulak sheep.

• Journal of Biosystems Engineering
• /
• 제35권4호
• /
• pp.215-223
• /
• 2010

In order to develop an precision aerial pesticide application system to be attached to an unmanned helicopter which can be applied to small lots of land, this study analyzed the flowing and spraying characteristics of the spray droplets by the main rotor downwash by setting the application conditions at the flight altitude of 3 m, the diameter of main rotor of 3.1 m, the boom length of around 2.8 m, and the spraying rate of 8 L/ha. The results of this study are summarized below. Through analysis of the covering area ratio of the spray droplets by main rotor downwash by nozzle type, boom with tilt angle and height, it was found that the covering area ratio of the twin flat-fan nozzle of around 25% was more uniform than other types of nozzle, also boom with $10^{\circ}$ tilt angle and spraying height of 3 m was shown to be the appropriate conditions for aerial application of pesticides. It was found that the nozzle position to minimize the scattering loss of spray droplets due to vortex phenomenon at both ends of the main rotor was around 10 cm from the end of the main rotor. An application test for the aerial pesticide application system attached to the HUA-ACEI unmanned helicopter developed by the Rural Development Administration showed that the range of covering area ratio of the spray droplets was 10-25%, and the spraying width was approximately 7 m when over 10% of covering area ratio was considered for valid spraying.

• Wind and Structures
• /
• 제15권6호
• /
• pp.481-494
• /
• 2012

The greenhouse type metal structures are increasingly used in modern construction of livestock farms because they are less laborious to construct and they provide a more favorable microclimate for the growth of animals compared to conventional livestock structures. A key stress factor for metal structures is the wind. The external pressure coefficient ($c_{pe}$) is used for the calculation of the wind effect on the structures. A high pressure coefficient value leads to an increase of the construction weight and subsequently to an increase in the construction cost. The EC1 in conjunction with EN 13031-1:2001, which is specialized for greenhouses, gives values for this coefficient. This value must satisfy two requirements: the safety of the structure and a reduced construction cost. In this paper, the Navier - Stokes and continuity equations are solved numerically with the finite element method (Galerkin Method) in order to simulate the two dimensional, incompressible, viscous air flow over the vaulted roofs of single span and twin-span with eaves livestock greenhouses' structures, with a height of 4.5 meters and with length of span of 9.6 and 14 m. The simulation was carried out in a wind tunnel. The numerical results of pressure coefficients, as well as, the distribution of them are presented and compared with data from Eurocodes for wind actions (EC1, EN 13031-1:2001). The results of the numerical experiment were close to the values given by the Eurocodes mainly on the leeward area of the roof while on the windward area a further segmentation is suggested.

• 지능정보연구
• /
• 제15권3호
• /
• pp.119-136
• /
• 2009

컨테이너 물동량 증가와 컨테이너선의 대형화에 따라서 항만 하역장비는 지속적으로 변화하고 있다. 본 연구는 항만 하역장비 가운데 컨테이너크레인의 기계적 생산성을 상세히 평가하기 위해 개발된 시뮬레이션 모델을 소개한다. 모델은 컨테이너크레인의 메커니즘으로 싱글 및 듀얼 트롤리 방식을, 스프레더 유형으로 싱글, 트윈, 탠덤 방식을 고려하고 컨테이너크레인의 규모와 속도 등에 관련된 세부 사양을 입력받아 기구학적 특성을 구현한다. 또한 외부의 물리적 제약으로 선박의 크기, 컨테이너의 적재위치와 무게를 고려한다. 본 모델은 다양한 입력변수가 파라미터 (parameter)로 분리되어 실험 조건을 편리하게 설정할 수 있으며, 객체 지향적으로 설계 개발되어 향후 새롭게 개발되는 장비 유형이나 기존 장비의 변화를 유연하게 수용할 수 있다.

• 한국재료학회지
• /
• 제13권7호
• /
• pp.453-459
• /
• 2003

In this paper the effect of interstitial heat treatment on the microstructure and mechanical properties was examined both in the 0.15C-6Mn steels and 0.15C-6Mn steels added with Nb or Ti. This result will be applied into the development of a steel which has the properties of high strength and high ductility resulted from the transformation induced plasticity. The strength-elongation combination was increased as the holding time was increased when the temperature is at $625^{\circ}C$. However, the strength-elongation combination was decreased sharply as the holding time was increased when the temperature is at $675^{\circ}C$. The tensile strength and elongation of a reverse transformed steels added with Ti or Nb was 93 kg/$\textrm{mm}^2$ and 40%, respectively. This steel shows higher strength more than 10% of the 0.15C-6Mn steel without loss of ductility. The autenite formed from the reverse transformed treatment has a fine lath type, which has the width size of 0.1-0.3 $\mu\textrm{m}$. The TRIP sequence normally transforms the austenite to martensite, however, some of the sequence will produce retained austenite \longrightarrow deformation twin \longrightarrow martensite

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.620-625
• /
• 2002

Considering the fuel consumption of car, a light structure of aluminum alloys is desired for car body nowadays. However, fusion welding of aluminum alloys has some problems of reduction of joint efficiency, porosity formation and hot cracking. ill the present work, investigation to improve the joint performance of laser welded joint has been carried out by addition of Cu, Ni, and Zr to A6N01 alloy welds. Aluminum alloy plate of 2.0mm in thickness with filler metal bar was welded by twin beam Nd:YAG laser facility (total power:5kW). The filler metals were prepared by changing the chemical compositions for adding the elements into the weld metal. Thirteen filler metal bars were prepared and pre-placed into the base metal before welding. Ar gas shielding with a flow rate of 10 l/min was used. The defocusing distance is kept at 0 mm. At travel speeds of 3 to 9 m/min and at laser power of 5kW (front beam 2kW rear beam 3kW), full penetration welds were obtained, whereas at travel speeds of 12 to 18 m/min and same power, partial penetration was observed. The joint efficiency of laser-welded joint was improved by the addition of Cu, Ni, and Zr due to the solid solution hardening, grain refining and precipitation hardening. The type of hardening has been further considered by metallurgical examination.

• Ocean and Polar Research
• /
• 제26권3호
• /
• pp.523-529
• /
• 2004

The seismic monitoring at Syowa Station$(69^{\circ}S,\;39^{\circ}E: SYO)$, located on the continental margin of the Eastern Dronning Maud Land, East Antarctica, began in 1959. Phase readings of the earthquakes have been reported since 1967 and have been annually published as part of the Data Report Series of the National Institute of Polar Research since 1968. An observation of a tripartite seismic network was carried out at SYO for a period of three years from 1987 to 1990. Epicenters of local earthquakes were determined for the first time by using the array network for the three-year period. Many different types of earthquakes, such as the mainshock-aftershock type, twin earthquake, earthquake swarms, etc., were detected during the period. After this, local events around SYO have been detected empirically from their waveforms recorded on seismograms. The seismic activity for the period of 1987-1990 was higher than that of the following decade. Earthquake epicenters, occurring during that period, were highly localized along the coast and in the central part of the $L\"{u}tzow-Holm$ Bay (LHB). Nine local earthquakes, recorded during the period of 1990-1996, showed many different types of events. The seismicity for the period of 1990-1996 was very low and the magnitudes ranged from 0.1 to 1.4. The locations of some events were determined by using the single station method for SYO, i.e., using the particle motions of the initial phase and S-P time. Two local events were detected in 1998 and one event in 2001. It would be estimated that the stress concentration was related to the glacial rebound around the LHB. Afterwards, we will be able to eventually examine the relationship between the seismicity around Antarctica and deglacial phenomena such as crustal uplift, and sea level change within the earth environmental system.

• 한국결정성장학회지
• /
• 제15권2호
• /
• pp.45-50
• /
• 2005

규소 표면의 기계적 손상은 산화 공정 중에 규소 표면에 여러 가지 형태의 결함들을 발생 시킨다. 규소 표면에 손상을 주는 마모 입자가 커짐에 따라 OISF보다는 etch pit의 형상이 동굴형인 선 결함(line defects)들이 많이 발생된다. 이들 결함들은 실리콘 결정을 성장시키는 단계에서 형성되는 결함들과는 상호 관련이 없다. 방향성 응고법으로 성장된 규소 결정속에 존재하는 결함들은 주로 twin과 stacking fault들이며 응고과정에서 발생이 예상되는 응력에 의한 전위는 거의 발견되지 않았다. 따라서 Czochralski 법으로 성장된 단 결정 규소뿐 아니라 방향성 응고법으로 성장된 다 결정 규소 기판도 표면의 결함들을 이용하여 extrinsic gettering을 통한 규소 결정 내부의 불순물 제거의 가능성이 높다.