• Title/Summary/Keyword: Turns ratio

Search Result 225, Processing Time 0.023 seconds

Capital Buffer and Determinant Factors of Conventional Banks in Indonesia

  • ANISA, Anisa;SUTRISNO, Sutrisno
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.7 no.12
    • /
    • pp.377-384
    • /
    • 2020
  • Banking is very regulated by the government and even has to follow regulations issued by the Basel Committee on Banking Supervision, which regulates banking in the world. According to Basel III, banks must provide capital reserves called capital buffers. The purpose of this study is to examine the factors that determine capital buffer. Factors thought to affect the capital buffer studied consisted of profitability (ROA), credit risk (NPL), liquidity risk (LDR), capital adequacy in the previous period (CARt-1), management risk (NIM), and ratio of operating risk (OER). The population in this study is conventional banks listed on the Indonesia Stock Exchange, as many as 42 banks, with a sample of 40 banks taken by purposive sampling method with an observation period of four years with quarterly data (2016-2019). To test the hypotheses, regression panel data is used. After being tested, it turns out that the fixed effect model is better than the common effect and random effect. The results of the study with fixed effect models show that ROA, NPL, and OER significantly and negatively affect capital buffer. CARt-1 has a positive and significant effect on capital buffer, while LDR and NIM do not affect capital buffer.

Design of a TRIAC Dimmable LED Driver Chip with a Wide Tuning Range and Two-Stage Uniform Dimming

  • Chang, Changyuan;Li, Zhen;Li, Yuanye;Hong, Chao
    • Journal of Power Electronics
    • /
    • v.18 no.2
    • /
    • pp.640-650
    • /
    • 2018
  • A TRIAC dimmable LED driver with a wide tuning range and a two-stage uniform dimming scheme is proposed in this paper. To solve the restricted dimming range problem caused by the limited conduction ratio of TRIAC dimmers, a conduction ratio compensation technique is introduced, which can increase the output current up to the rated output current when the TRIAC dimmer turns to the maximum conduction ratio. For further optimization, a two-stage uniform dimming diagram with a rapid dimming curve and a slow dimming curve is designed to make the LED driver regulated visually uniform in the whole adjustable range of the TRIAC dimmer. The proposed control chip is fabricated in a TSMC $0.35{\mu}m$ 5V/650V CMOS/LDMOS process, and verified on a 21V/500mA circuit prototype. The test results show that, in the 90V/60Hz~132V/60Hz ac input range, the voltage linear regulation is 2.6%, the power factor is 99.5% and the efficiency is 83%. Moreover, in the dimming mode, the dimming rate is less than 1% when the maximum dimming current is 516mA and the minimum dimming current is only about 5mA.

The Peer Effects of Under-performing Students on Proficient Students: Evidence from Regression Discontinuity Design (학업성취도 미달 학생이 보통 이상 학생의 학업성취도에 미치는 친구효과 추정)

  • Woo, Seokjin
    • Journal of Labour Economics
    • /
    • v.39 no.3
    • /
    • pp.75-97
    • /
    • 2016
  • This paper estimates the peer effect of how improving the under-performing students can affect the academic performance of other students, focusing on the ratio of students more than proficient. We take advantage of the regression discontinuity design of the policy assignment rule of School-for-Improvement (SFI), which targeted the under-performing schools as an identification strategy. The estimation results from the 2009-2010 NAEA (National Assessment of Educational Achievement) reveal that the decrease of the ratio of under-performing students tends to increase the ratio of excellent or proficient students at around the policy cutoff. The finding turns out to be robust to various falsification tests.

  • PDF

Effect of Pole to Slot Ratio on Cogging torque and EMF Waveform in Fractional Slotted PM motor (PM 모터에서 극당 슬롯비율이 코깅토오크와 역기전력 파형에 미치는 영향력에 관한 연구)

  • Kim, Do-Wook;Min, Cheol-Ki;Jun, Myung-Sun;Lee, Kab-Jae;Lee, Ju
    • Proceedings of the KIEE Conference
    • /
    • 2002.04a
    • /
    • pp.74-76
    • /
    • 2002
  • Conventional integral slot design tend to have a high cogging torque and large end turns which contribute to copper losses. The fractional slot is more effective compared to integral slot in the cogging torque and EMF waveform. The effectiveness of fractional slot can be maximized by selecting optimal pole to slot ratio. This paper presents the effect of pole to slot ratio on the cogging torque and EMF waveform in the fractional slotted permanent magnet(PM) motor. The effectiveness of the proposed designs had been confirmed by comparing cogging torque, and EMF waveform between conventional and new models which are analyzed by Finite Element Method(FEM).

  • PDF

Analysis of MANET Protocols Using OPNET (OPNET을 이용한 MANET 프로토콜 분석)

  • Zhang, Xiao-Lei;Wang, Ye;Ki, Jang-Geun;Lee, Kyu-Tae
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.9 no.4
    • /
    • pp.87-97
    • /
    • 2009
  • A Mobile Ad hoc Network (MANET) is characterized by multi-hop wireless connectivity, frequently changing network topology with mobile nodes and the efficiency of the dynamic routing protocol plays an important role in the performance of the network. In this paper, the performance of five routing protocols for MANET is compared by using OPNET modeler: AODV, DSR, GRP, OLSR and TORA. The various performance metrics are examined, such as packet delivery ratio, end-to-end delay and routing overhead with varying data traffic, number of nodes and mobility. In our simulation results, OLSR shows the best performance in terms of data delivery ratio in static networks, while AODV has the best performance in mobile networks with moderate data traffic. When comparing proactive protocols (OLSR, GRP) and reactive protocols (AODV, DSR) with varying data traffic in the static networks, proactive protocols consistently presents almost constant overhead while the reactive protocols show a sharp increase to some extent. When comparing each of proactive protocols in static and mobile networks, OLSR is better than GRP in the delivery ratio while overhead is more. As for reactive protocols, DSR outperforms AODV under the moderate data traffic in static networks because it exploits caching aggressively and maintains multiple routes per destination. However, this advantage turns into disadvantage in high mobility networks since the chance of the cached routes becoming stale increases.

  • PDF

A Numerical Study on the Drag of Axial Cylinder (종축 실린더의 항력에 대한 수치 해석적 연구)

  • Lee, Hyun-Bae;Choi, Jung-Kyu;Kim, Hyoung-Tae
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.49 no.6
    • /
    • pp.512-520
    • /
    • 2012
  • In this study, the numerical analysis for the flows around an axial cylinder is carried out in order to investigate the basic characteristics of drag of blunt body. A variation of drag and flow separation for the axial cylinder is investigated according to the length-diameter ratio. Also, the flow separation around the head is removed by rounding-off the front edge of the body to analyze the effect of drag reduction. Most of the drag turns out to be a pressure drag component and the variation of drag is caused by the change of pressure and velocity which is affected strongly by the flow separation at the edges of the axial cylinder. Especially, it is found that the pressure drag component acting on the back of axial cylinder, as known as the base drag, mainly changes the drag. As the length-diameter ratio of axial cylinder increases, the drag sharply decreases and the minimum is shown when the length-diameter ratio is about 2.4. Also, as the length-diameter ratio increases further above 2.4, the drag increases at a slower rate. The pressure drag is almost constant when the length-diameter ratio is greater than 8, but the increase of friction drag component is the reason for the increase of the drag. When flow separation is removed completely at the front edge of the axial cylinder, the pressure drag component is reduced to 12~17%, but the total drag is reduced to only 17%~32% due to the friction drag component that increases linearly proportional to the length-diameter ratio.

Living and Behavioral Differentials of the Elderly's Dementia in Daegu (대구시 노인들의 치매 실태 및 치매노인들의 생활 습관적 특성)

  • Kim, Han-Gon
    • Korea journal of population studies
    • /
    • v.28 no.2
    • /
    • pp.165-182
    • /
    • 2005
  • The main purposes of this study are to describe the elderly dementia, and to explore characteristics of the elderly dementia among the aged 65 and over in Daegu area. In this study, 1,120 subjects which were 0.6 percent of the population were selected and face-to-face interviews were conducted. The face-to-face interviews were conducted from July 1, 2004 to August 31, 2004. KMMSE was introduced to measure the status of the interviewees' dementia. The findings of this study are as follows: 8.9 percent of respondents turns out to be dementia patients. Among the dementia patients, 52.5 percent are mild dementia patients, 35.0 percent are mid-level symptoms and 12.5 percent are severe symptoms of dementia patients. Cross-tabulation analyses and logistic regression analysis were introduced to explore the demographic, living, and behavioral differentials of the elderly's dementia. According to the logistic regression analysis, it turns out that white educational attainment, participating in the leisure activities for both physical exercise and mental activities, having meals regularly, adequate amount of meals, and high economic status decrease the odds ratio of elder dementia among the elderly who are 65 and above in Daegu area and are statistically significant. On the other hand, age increases the odds ratio of the elder dementia of the elder among Koreans above 65 in Daegu area. Finally, policy implications and some suggestions for the improvement of the elder dementia are introduced and discussed.

Response Reduction of a SDOF Structure based on Friction Force Ratio of MR Controller (MR제어기의 마찰력비에 따른 단자유도 구조물의 응답감소)

  • Seong, Ji-Young;Min, Kyung-Won
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.23 no.4
    • /
    • pp.435-443
    • /
    • 2010
  • This study presents key parameters for the structure installed with MR controller in reducing its responses. MR controller is regarded as Bingham model of which control forces are frictional and viscous ones. The parameters are identified as friction force ratios, $R_f$ and $R_h$ which are, respectively, ratio of MR controller friction force to static restoring force for free vibration and ratio of the friction force to amplitude of harmonic force. Structure-MR controller system shows nonlinear response behavior due to friction force. Energy balance strategy is adopted to transform the behavior to linear one with equivalent damping ratio. Finally, proposed equivalent linear process is compared to the nonlinear one, which turns out to give acceptably good results.

The performance evaluation for H2 reforming of the plate type hydrogen generation system (평판형 수소생산시스템의 수소개질 성능평가)

  • Heo, Su-Bin;Yun, Bong-Seock;Lee, Do-Hyung
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.38 no.6
    • /
    • pp.602-608
    • /
    • 2014
  • Hydrogen energy, a field of low-carbon substitute energy, can be produced by fossile fuel reforming and electrolysis of water etc. We developed 1kW class flat type reformer for PEM Fuel Cells. The PEMFC is highly sensitive to carbon monoxide because CO has detrimental effects on the performance of the fuel cell. Thus, reformed gas supplied to Fuel cell system, which maintained CO concentration below 10ppm. After applying optimum drive condition, reformed gas was measured with gas chromatography and could find out about each experimental condition of $H_2$ and CO concentration. As a results, The 1kW class plate type hydrogen generation system's optimum condition is A/F ratio ${\alpha}=1.3$, STR temperature 1023K, S/C ratio 3, and $PrOx1{\cdot}2$ 30cc/min. It turns out that installation of PrOx 2 stage is more efficient for reducing CO concentration.

Analysis of the Exterior Spatial Organization and Residents\\\\` Satisfaction Degree to the Apartment Complex in Teagu (대구시 아파트 단지의 외부공간구성 및 만족도에 관하여)

  • 권태식;김영수
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.18 no.1
    • /
    • pp.53-68
    • /
    • 1990
  • The purpose of this study was to establish the more rational and practical basic theory for the landscape planning in the aparment complex. In this study, the actual conditions of exterior space, the residens' satisfaction degree and the correlation between exterior space and the residents' satisfaction defree were investigated and analyzed on the 13apartment complexes in Taegu City. Through the statistical analysis, the main results were obtained as fellows : It was found that the size of green area ratio in the apartment complexes were in the order of Jugong Apt. (Korean Housing Corporation), Siyoung Apt. (City Operation), Minyoung high-rise Apt. (Private Business) and Minyoung low-rise Apt. (Private Business) complex. The highest ratio of footway and Parking area were shown in Minyoung high-rise Apt. complex. The important factors at the exterior space of apartment complex were composed by 6 major factors, importance degrees of which are Visual, Practical, Convenient, Sentimental, Recreational and Spatial factors for teenagers in orders. The residents' satisfaction degrees to the exterior space were highly correlated with the spatil organization, size of green area and quantity of trees, view, management situation, defensibility of outside noise, rest place, water landscapings by turns. In order to get more than the average satisfaction degree 18 exterior space, the green area should be occupied by 35% of the apartment complex area and more than 76% of the green area (i. e. 16% of the apartment complex area) should be planted with trees. In the Taegu City regulation, the ratio of tree composition is proposed for only the number of tree. But it was shown that the satifaction degree are more correlated with the species and afforestation of trees than the nuts her of trees in this study. therefore, the species of tree and the afforestation of tree should be considered when the landscape planning of the apartment complex begins. It was found that the ratio of afforestation to make the more desirable exterior space In the apartment complex shoule be 8 to 2 in the ratio of arbor to shrub. It was also required that 30 species of arbor and 15 species of shrub should be planted for the more desirable landscape of the apartment complex.

  • PDF