• Journal of Animal Science and Technology
• /
• v.64 no.2
• /
• pp.365-379
• /
• 2022

The present study was conducted with the aim of investigating the effect of storage length, turning frequency and egg position on internal quality traits of chukar eggs obtained from 56-week-old chukar partridges under the same nutrition and management conditions. A total of 720 eggs were collected and assigned to 36 subgroups according to storage length (7, 14, 21, and 28 d), turning frequency (0, 1, and 24 per day) and egg position (pointed end up, blunt end up and horizontal). As a result of the study, almost all the internal quality traits of chukar eggs were negatively affected by lengthening of storage period especially 21 days and longer (p < 0.001). Internal egg quality traits weren't statistically affected by turning frequency except yolk index (p < 0.01). An improvement was observed in Haugh unit, albumen index and heigh of eggs stored with pointed end up (p < 0.001). Some significant interactions occurred among all internal egg quality traits which were mostly dependent on the eggs stored horizontally, extended storage time more than 21 days and egg turning during storage. The results and interactions showed that internal quality traits would be preserved well for the eggs stored less than 21 days with the position of pointed end up independent of turning. If the storage period was to exceed 21 days, the eggs should be positioned horizontally and turning should be applied to preserve the quality of chukar eggs.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.269-269
• /
• 2019

The ships are turning for the purpose of collision avoidence and change of course. It is possible that ships have capsizing accident when improper loading of cargo and excessive use rudder angle in turning. It is difficult for navigation officers to recognize the danger of heeling during a turn, because the dynamic state of the ship changes in real time. Thus, in this study, ship's heeling angle was predicted during turning using the maneuverability indices estimated from the ship's autopilot. The maneuverability indices estimated through the Kalman filter of Autopilot is real-time predictable. The turning radius was obtained from the estimated Index of turining ability and calculations of the heeling angle were possible in turning. It is intended to be used as a basic data on the prevention of danger heeling angle during turning.

• The Journal of Korean Physical Therapy
• /
• v.19 no.5
• /
• pp.21-28
• /
• 2007

Purpose: The aims of this study was to evaluate the effects of shoulder lateral rotation and trunk extension exercises on standing posture improvement exercises using turning round in the patients with Parkinson's disease. Methods: For twenty-one patients with Parkinson's disease, shoulder lateral rotation and trunk extension exercises were performed for a total of three sets, ten times a set, three days a week for twelve weeks. To measure turning round, ink foot-print method was used. The number of steps and time were measured every week for before and after study (twelve weeks). Results: The results are as follows: Changes in steps and time on each week during twelve weeks showed significant differences, compared with before test(p<0.05). Conclusion: Standing posture improvement exercises can help perform turning round in the patients with Parkinson's disease.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.2
• /
• pp.111-118
• /
• 2006

It is indispensable to grasp the turning ability of a ship to operate her effectively. For this purpose, the author measured the turning ability of training ship, A-RA by use of bow thruster and stem rudder. The turning ability of this ship, in case of using both of stem rudder and bow thruster at the same time, caused by increase of steering angle provides more influence to the size of tactical diameter than it caused by the power of bow thruster. But the influence of bow thruster on the turning ability is available only within rudder angle $5^{\circ}\;-\;10^{\circ}$, so it is possible to grasp that the effect of bow truster is reduced as rudder angle become bigger. In case of the influence of bow thruster by her speed, the ability of bow thruster is very effective at low speed, but it is almost not available in normal turning speed. Therefore, the using both of stem rudder and bow thruster can be useful in case of low speed proceeding at entrance or departure of the narrow waterway or inside port which sea traffic is congest for collision avoidance.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.298-305
• /
• 2021

Identifying the effect of turning characteristics on collision avoidance for Maritime Autonomous Surface Ships (MASS) can provide a key to avoid the collision of MASS. The purpose of this study was to derive a method to identify the effect of turning characteristics, which can be changed by various rudder angles and the ship's speed, on collision avoidance. The turning circle was observed using a mathematical model of a 161-meter-long ship, and it was analyzed that the turning circle had an effect on collision avoidance through numerical simulations of collision avoidance for four collision situations of two ships. The evaluation results using the two variables, the minimum relative distance between two ships and the minimum time at the minimum relative distance, demonstrated that the rudder angle has a major influence on the change of the minimum relative distance, and the ship's speed has a major influence on the change of the minimum time. The evaluation method proposed in this study was expected to be applicable to collision avoidance as a measures in remote control of MASS.

• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.95-103
• /
• 2016

PURPOSES : Permitted left turn is a turning maneuver in which a vehicle turns left using a gap between oncoming vehicles, called gap acceptance, and it enables for more efficient traffic operation at intersections. In Korea, the permitted left turn has not been a common maneuver at signalized or un-signalized intersections. However, many experts and the Police Agency tried to apply this effective turning maneuver at intersections in Korea since 2010. Though the investigation of gap acceptance is significantly important in understanding a driver's behavior at intersections, there have not been many studies about this topic, specifically a study to develop probability models of gap acceptance behavior. METHODS : In this study, the probability model of gap acceptance behavior for a permitted left turn was developed based on observational field studies. To develop the model, seven variables were analyzed including gap, waiting time, traffic volume, conflict-flow vehicle type, left-turning vehicle type, the number of lane, and time. RESULTS : In the final model, gap and left-turning vehicle type were found to be significant influencing factors. CONCLUSIONS : Through this model development, it was concluded that as the gap size increased, the probability of gap acceptance was higher. Moreover, when a left-turning vehicle was a passenger car, the probability of gap acceptance was higher than compared to large size buses or freight cars.

• Journal of the Korean Institute of Navigation
• /
• v.10 no.2
• /
• pp.83-96
• /
• 1986

In the restricted sea way such as fair way in harbor, narrow channel etc, the safe ship-handling is a very important problem, which is greatly related with turning ability of ships. It is of great importance that ship-handlers can grasp the position of pivoting point varying with time increase at any moment for relevant steering activities. Mean while, in advanced ship-building countries they study and investigated pivoting point related with turning characteristics, hut their main interest lies in ship design, not in safe ship controlling and maneuvering. In this regards it is the purpose of this paper to provide ship-handlers better under standing of pivoting point location together with turning characteristics and then to help them in safe ship-handling by presenting fact that pivoting points vary according to configuration of ships. The author calculated the variation of pivoting point as per time increase for various type of vessels, based on the hydrodynamic derivatives obtained at test of Davidson Laboratory of Stevens Institutes of Technology , New Jersey, U.S.A. The results were classified and investigated according to the magnitude of block coefficient , length-beam ratio, length-draft ratio, rudder area ratio ete, and undermentioned results were obtained. (1) The trajectory of pivoting point due to variation of rudder angle are all the same at any time, though the magenitude of turning circle are changed variously. (2) The moving of pivoting point is affected by the magnitude of block coefficient, length-beam ratio, length-draft ratio, however the effect by rudder area ratio might be disregarded. (3) In controlling and maneuvering of vessels in harbor, ship-handlers might regard that the pivoting point would be placed on 0.2~0.3L forward from center of gravity at initial stage. (4) The pivoting point of VLCC or container feeder vessels which have block coefficient more than 0.8 and length-beam ratio less than 6.5 are located on or over bow in the steady turning. (5) When a vessel intends to avoid some floating obstruction such as buoy forward around her eourse, the ship-handler might consider that the pivoting point would be close by bow in ballast condition and cloase by center of gravity in full-loaded condition.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.270-276
• /
• 2000

Hard turning has the potential to replace grinding process and to achieve significant reduction in production time and cost. The main applications for hard turning is finishing process, namely grinding process. Therefore, it must be able to satisfy high surface integrity of the workpiece. This paper discusses surface quality in terms of residual stress and damaged layer with respect to cutting parameters in an intermittent hard turning. Damaged layer experiment is carried out orthogonal array. From that is based on the orthogonal array. From the response table, cutting parameters are analyzed from the view point of the damaged layer and residual stress. From this experimental results, even though in the intermittent hard turning, surface integrity turns out be good enough for replacing grinding process.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.9
• /
• pp.960-966
• /
• 2007

High-efficient machining, which means to machine a part in the least amount of time, is the most effective tool to improve productivity. In this study, a new feed optimization method based on virtual manufacturing was proposed to realize the high-efficient machining in turning process through the cutting power regulation. The cutting area was evaluated by using the Boolean intersection operation between the cutting tool and workpiece. And the cutting force and power were predicted from the cutting parameters such as feed, depth of cut, spindle speed, specific cutting force, and so on. Especially, the reliability of the proposed optimization method was validated by comparing the predicted and measured cutting forces. The simulation results showed that the proposed optimization method could effectively enhance the productivity in turning process.

• Journal of Astronomy and Space Sciences
• /
• v.39 no.3
• /
• pp.79-86
• /
• 2022

Thermospheric wind observations from high to mid latitudes are compared with the newly developed Multiscale Atmosphere Geospace Environment (MAGE) model for the Nov 3-4 geomagnetic storm. The observation and simulation comparison shows a very good agreement and is better at high latitudes in general. We were able to identify a thermospheric poleward wind reduction possibly linked to a northward turning of the Interplanetary Magnetic Field (IMF) at ~22 UT on Nov 3 and an enhancement of the poleward wind to a southward turning near 10 UT on Nov 4 at high latitudes. An IMF southward turning may have led to an enhancement of equatorward winds at Boulder, Colorado near midnight. Simultaneous occurrence of aurora may be associated with an IMF By turning negative. The MAGE model wind simulations are consistent with observations in these cases. The results show the model can be a very useful tool to further study the magnetosphere and ionosphere coupling on short time scales.