• Journal of Animal Science and Technology
• /
• 제64권2호
• /
• pp.365-379
• /
• 2022

The present study was conducted with the aim of investigating the effect of storage length, turning frequency and egg position on internal quality traits of chukar eggs obtained from 56-week-old chukar partridges under the same nutrition and management conditions. A total of 720 eggs were collected and assigned to 36 subgroups according to storage length (7, 14, 21, and 28 d), turning frequency (0, 1, and 24 per day) and egg position (pointed end up, blunt end up and horizontal). As a result of the study, almost all the internal quality traits of chukar eggs were negatively affected by lengthening of storage period especially 21 days and longer (p < 0.001). Internal egg quality traits weren't statistically affected by turning frequency except yolk index (p < 0.01). An improvement was observed in Haugh unit, albumen index and heigh of eggs stored with pointed end up (p < 0.001). Some significant interactions occurred among all internal egg quality traits which were mostly dependent on the eggs stored horizontally, extended storage time more than 21 days and egg turning during storage. The results and interactions showed that internal quality traits would be preserved well for the eggs stored less than 21 days with the position of pointed end up independent of turning. If the storage period was to exceed 21 days, the eggs should be positioned horizontally and turning should be applied to preserve the quality of chukar eggs.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2019년도 추계학술대회
• /
• pp.269-269
• /
• 2019

선박은 충돌회피 및 변침을 목적으로 선회를 수행한다. 부적절한 화물 적재 및 선회 중 과도한 타각을 사용하면 전복사고로 이어질 수 있다. 선회 중 선박동적상태가 실시간으로 변화하기 때문에 항해사들은 선회 중 횡경사의 위험을 인지하기 어렵다. autopilot에서 추정된 조종성 지수를 이용하여 선회 중 횡경사를 예측하였다. Autopilot의 Kalman filter를 통하여 추정된 조종성 지수는 실시간으로 예측이 가능하며, 추정된 선회성 지수로부터 선회반경을 구하고 선회 중 횡경사의 계산이 가능하였다. 본 연구는 선회 중 위험횡경사 예방에 관한 기초자료로 활용하고자 한다.

• The Journal of Korean Physical Therapy
• /
• 제19권5호
• /
• pp.21-28
• /
• 2007

Purpose: The aims of this study was to evaluate the effects of shoulder lateral rotation and trunk extension exercises on standing posture improvement exercises using turning round in the patients with Parkinson's disease. Methods: For twenty-one patients with Parkinson's disease, shoulder lateral rotation and trunk extension exercises were performed for a total of three sets, ten times a set, three days a week for twelve weeks. To measure turning round, ink foot-print method was used. The number of steps and time were measured every week for before and after study (twelve weeks). Results: The results are as follows: Changes in steps and time on each week during twelve weeks showed significant differences, compared with before test(p<0.05). Conclusion: Standing posture improvement exercises can help perform turning round in the patients with Parkinson's disease.

• 수산해양기술연구
• /
• 제42권2호
• /
• pp.111-118
• /
• 2006

It is indispensable to grasp the turning ability of a ship to operate her effectively. For this purpose, the author measured the turning ability of training ship, A-RA by use of bow thruster and stem rudder. The turning ability of this ship, in case of using both of stem rudder and bow thruster at the same time, caused by increase of steering angle provides more influence to the size of tactical diameter than it caused by the power of bow thruster. But the influence of bow thruster on the turning ability is available only within rudder angle $5^{\circ}\;-\;10^{\circ}$, so it is possible to grasp that the effect of bow truster is reduced as rudder angle become bigger. In case of the influence of bow thruster by her speed, the ability of bow thruster is very effective at low speed, but it is almost not available in normal turning speed. Therefore, the using both of stem rudder and bow thruster can be useful in case of low speed proceeding at entrance or departure of the narrow waterway or inside port which sea traffic is congest for collision avoidance.

• 한국항해항만학회지
• /
• 제45권6호
• /
• pp.298-305
• /
• 2021

자율운항선박(Maritime Autonomous Surface Ships, MASS)의 선회특성이 충돌회피에 미치는 영향을 식별하는 것은 MASS의 충돌회피에 핵심적인 단서를 제공할 수 있다. 본 연구의 목적은 다양한 타각과 선속에 의해서 변할 수 있는 선회특성이 충돌회피에 미치는 영향을 식별하기 위한 것이다. 선회특성이 충돌회피에 미치는 영향은 전장 161 미터 선박의 수학 모델을 이용하여 선회권을 관측한 후, 네 가지 충돌조우상황에 대한 충돌회피 수치 시뮬레이션의 결과를 이용하여 분석하였다. 두 선박 사이의 최소상대거리와 최소시간을 평가 변수로 이용하여 평가한 결과, 타각은 최소상대거리의 변화에 주요한 영향을 미치고, 선박의 속력은 최소시간의 변화에 주요한 영향을 미치는 것으로 나타났다. 본 연구에서 제안한 평가 방법은 MASS의 원격제어에서 충돌회피를 하나의 방법으로 적용 가능할 것으로 기대된다.

• 한국도로학회논문집
• /
• 제18권5호
• /
• pp.95-103
• /
• 2016

PURPOSES : Permitted left turn is a turning maneuver in which a vehicle turns left using a gap between oncoming vehicles, called gap acceptance, and it enables for more efficient traffic operation at intersections. In Korea, the permitted left turn has not been a common maneuver at signalized or un-signalized intersections. However, many experts and the Police Agency tried to apply this effective turning maneuver at intersections in Korea since 2010. Though the investigation of gap acceptance is significantly important in understanding a driver's behavior at intersections, there have not been many studies about this topic, specifically a study to develop probability models of gap acceptance behavior. METHODS : In this study, the probability model of gap acceptance behavior for a permitted left turn was developed based on observational field studies. To develop the model, seven variables were analyzed including gap, waiting time, traffic volume, conflict-flow vehicle type, left-turning vehicle type, the number of lane, and time. RESULTS : In the final model, gap and left-turning vehicle type were found to be significant influencing factors. CONCLUSIONS : Through this model development, it was concluded that as the gap size increased, the probability of gap acceptance was higher. Moreover, when a left-turning vehicle was a passenger car, the probability of gap acceptance was higher than compared to large size buses or freight cars.

• 한국항해학회지
• /
• 제10권2호
• /
• pp.83-96
• /
• 1986

In the restricted sea way such as fair way in harbor, narrow channel etc, the safe ship-handling is a very important problem, which is greatly related with turning ability of ships. It is of great importance that ship-handlers can grasp the position of pivoting point varying with time increase at any moment for relevant steering activities. Mean while, in advanced ship-building countries they study and investigated pivoting point related with turning characteristics, hut their main interest lies in ship design, not in safe ship controlling and maneuvering. In this regards it is the purpose of this paper to provide ship-handlers better under standing of pivoting point location together with turning characteristics and then to help them in safe ship-handling by presenting fact that pivoting points vary according to configuration of ships. The author calculated the variation of pivoting point as per time increase for various type of vessels, based on the hydrodynamic derivatives obtained at test of Davidson Laboratory of Stevens Institutes of Technology , New Jersey, U.S.A. The results were classified and investigated according to the magnitude of block coefficient , length-beam ratio, length-draft ratio, rudder area ratio ete, and undermentioned results were obtained. (1) The trajectory of pivoting point due to variation of rudder angle are all the same at any time, though the magenitude of turning circle are changed variously. (2) The moving of pivoting point is affected by the magnitude of block coefficient, length-beam ratio, length-draft ratio, however the effect by rudder area ratio might be disregarded. (3) In controlling and maneuvering of vessels in harbor, ship-handlers might regard that the pivoting point would be placed on 0.2~0.3L forward from center of gravity at initial stage. (4) The pivoting point of VLCC or container feeder vessels which have block coefficient more than 0.8 and length-beam ratio less than 6.5 are located on or over bow in the steady turning. (5) When a vessel intends to avoid some floating obstruction such as buoy forward around her eourse, the ship-handler might consider that the pivoting point would be close by bow in ballast condition and cloase by center of gravity in full-loaded condition.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.270-276
• /
• 2000

Hard turning has the potential to replace grinding process and to achieve significant reduction in production time and cost. The main applications for hard turning is finishing process, namely grinding process. Therefore, it must be able to satisfy high surface integrity of the workpiece. This paper discusses surface quality in terms of residual stress and damaged layer with respect to cutting parameters in an intermittent hard turning. Damaged layer experiment is carried out orthogonal array. From that is based on the orthogonal array. From the response table, cutting parameters are analyzed from the view point of the damaged layer and residual stress. From this experimental results, even though in the intermittent hard turning, surface integrity turns out be good enough for replacing grinding process.

• 대한기계학회논문집A
• /
• 제31권9호
• /
• pp.960-966
• /
• 2007

High-efficient machining, which means to machine a part in the least amount of time, is the most effective tool to improve productivity. In this study, a new feed optimization method based on virtual manufacturing was proposed to realize the high-efficient machining in turning process through the cutting power regulation. The cutting area was evaluated by using the Boolean intersection operation between the cutting tool and workpiece. And the cutting force and power were predicted from the cutting parameters such as feed, depth of cut, spindle speed, specific cutting force, and so on. Especially, the reliability of the proposed optimization method was validated by comparing the predicted and measured cutting forces. The simulation results showed that the proposed optimization method could effectively enhance the productivity in turning process.

• Journal of Astronomy and Space Sciences
• /
• 제39권3호
• /
• pp.79-86
• /
• 2022

Thermospheric wind observations from high to mid latitudes are compared with the newly developed Multiscale Atmosphere Geospace Environment (MAGE) model for the Nov 3-4 geomagnetic storm. The observation and simulation comparison shows a very good agreement and is better at high latitudes in general. We were able to identify a thermospheric poleward wind reduction possibly linked to a northward turning of the Interplanetary Magnetic Field (IMF) at ~22 UT on Nov 3 and an enhancement of the poleward wind to a southward turning near 10 UT on Nov 4 at high latitudes. An IMF southward turning may have led to an enhancement of equatorward winds at Boulder, Colorado near midnight. Simultaneous occurrence of aurora may be associated with an IMF By turning negative. The MAGE model wind simulations are consistent with observations in these cases. The results show the model can be a very useful tool to further study the magnetosphere and ionosphere coupling on short time scales.