• 한국항해항만학회지
• /
• 제46권1호
• /
• pp.18-25
• /
• 2022

해양수산부는 2014. 4. 16. 발생한 세월호 전복사건 이후 안전관리 부실 문제가 제기되어 법과 제도를 강화하였다. 그럼에도 불구하고 내항 여객선에서는 최근 5년 동안 매년 평균 약 13건의 충돌·접촉·좌초사고 발생하고 있다. 특히 해양안전심판원의 재결에 따르면, 항내에서 조선 중 발생한 여객선 사고의 주된 원인은 대부분 선장의 부적절한 조선 또는 부주의라고 판단하였다. 이에 본 논문은 항내에서 발생한4건의 여객선 해양사고를 분석한 후 선장의 부적절한 조선 등 행위에 기여한 환경적·제도적·물적·인적 요인에 대해 상세히 살펴보았다. 그결과 다음과 같은 기여 요인들이 확인되었다. 첫째 환경적인 요인으로서 선회장의 크기가 기준을 충족하지 못한 사례가 확인되었다. 둘째 제도적인 요인으로서 VTS관제가 적절히 지원되지 않았고, 선장이 안전한 항내 조선을 위한 교육이 부족하며, 최신화된 해도가 제공되지 않았다. 셋째 물적요인으로서 선장이 Wing bridge에서 접·이안 조선 중 실시간으로 속력을 확인할 수 있는 속력계가 설치되어 있지 않았다. 그리고 인적요인으로서 선장이 적절한 선교자원을 지원받지 못하였고, 적절한 항해계획이 수립되지 않았다. 이에 본 논문에서는 선장의 안전한 항내 조선을 위해 기준에 맞는 선회장을 확보하는 것과 선장이 선박조종 시뮬레이션 교육을 이수하도록 하는 것 등을 개선방안으로 제시하였다.

• 수산해양교육연구
• /
• 제15권1호
• /
• pp.123-133
• /
• 2003

The present investigations were carried out for the most and fundamental elements, what is called maneuverability, stability, safety, rig, sail about the world famous race, VOLVO60 and America's cup. The results obtained are summarized as follows: First, the structure of yacht should be designed with focuse on the preparation for the preparation of collision with other yachts around, with the dumps of iceberg and also whales nearby. At the same time, the accurate calculation on the each structure and equipment of yacht should be processed for the dynamic stability in the rainstorms. Second, VOLVO60, long-distance sailing, should be emphasized on the light weight and the safety, while the boat for America's cup, short-distance sailing, should be stressed on the appropriate weight of the body and the maximum speed for fast maneuverability. Third, up-to-the minute materials should be developed for the appropriate wind power and the turning of directions.

• 한국도서관정보학회지
• /
• 제13권
• /
• pp.1-28
• /
• 1986

An outline of the scope and history of encyclopaedias is essentially a guide to the story of the development of scholarship, for encyclopaedias stand out as landmarks throughout the centuries, recording much of what was known at the time of publication. the early stage of encyclopaedias originated a summaries of scholarship in forms comprehensible to their readers, so that compiled their works single-handedly. The impact of Christianity brought a new phase in Western encyclopaedia making. As religion is emphasized in the encyclopaedias of those time, it pervades the whole of their contents. It was made for Christian education. The general trend in treatment in the Middle ages was arranged by subject. Most of the encyclopaedias issued before the introduction of printing into Europe having been arranged in a methodical or classical form, the alphabetically arranged encyclopaedia has a history of less than 1000 years. By influence of printing and Renaissance, a turning point came with encyclopaedia making. There were just as increasingly preferred to put practical topics first. Until those time, thought in terms of arranging their entries in alphabetical order has already familiarized. By generalization of public education in 19th-century, there were increasingly the number of purchasers so that prevailed commercial publication. It was those time that was settled the features of contemporary such as multivolume compendium of all available knowledge, complete with maps and a very detailed index, as well as numerous adjuncts such as bibliographies, illustrations, lists of abbreviations and foreign expressions, gazetteers, and so on.

• 한국공작기계학회논문집
• /
• 제15권4호
• /
• pp.44-48
• /
• 2006

Recently, demand the ultra precision product which is increasing rapidly is used extensively frontier industry field such as semi-conductor, computer, aerospace, precision machine. Ultra precision processing is the portion that is very needed to NT in the field of mechanical engineering. The latest date, together with radical advancement of electronic and photonics industry, necessity of ultra precision processing is on the increase for the manufacture of various kernel parts those are connected with these industrial fields. Specially, require motion accuracy of high resolution of nm order in stroke of hundreds millimeters according as diameter of processing object great and processing accuracy rises. In this case ,the response speed absolute delay because inertial mass of moving part is very large. Therefore, real time motion error compensation becomes very hardly. In this paper, we used ultra precision cutting unit(UPCU) to cope such problem. a UPCU is designed and tested to obtain sub-micrometer from accuracy in diamond turning of flat surfaces. The thermal growth spindle error is compensated for real time using a UPCU driven by piezoelectric actuator along with a laser encoder displacement sensor.

• 한국연소학회지
• /
• 제10권3호
• /
• pp.25-33
• /
• 2005

Fast-time instability is investigated for diffusion flames with Lewis numbers greater than unity by employing the numerical technique called the Evans function method. Since the time and length scales are those of the inner reactive-diffusive layer, the problem is equivalent to the instability problem for the $Li\tilde{n}\acute{a}n#s$ diffusion flame regime. The instability is primarily oscillatory, as seen from complex solution branches and can emerge prior to reaching the upper turning point of the S-curve, known as the $Li\tilde{n}\acute{a}n#s$ extinction condition. Depending on the Lewis number, the instability characteristics is found to be somewhat different. Below the critical Lewis number, $L_C$, the instability possesses primarily a pulsating nature in that the two real solution branches, existing for small wave numbers, merges at a finite wave number, at which a pair of complex conjugate solution branches bifurcate. For Lewis numbers greater than $L_C$, the solution branch for small reactant leakage is found to be purely complex with the maximum growth rate found at a finite wave number, thereby exhibiting a traveling nature. As the reactant leakage parameter is further increased, the instability characteristics turns into a pulsating type, similar to that for L < $L_C$.

• 대한기계학회논문집
• /
• 제8권5호
• /
• pp.450-461
• /
• 1984

본 연구에서는 그러한 간접적인 방법의 하나로서 공구대로부터 가속도신호를 절삭시간의 경과에 따라 측정한 후, 시계열자료를 모델화하는 전산프로그램을 사용하 여 적합한 모델을 구하고 그로부터 유도되는 여러 특성들을 관찰함으로써 보다 현실적 인 방법론을 제시하고자 하였다.

• 한국표면공학회지
• /
• 제15권3호
• /
• pp.138-145
• /
• 1982

The effects of the simultaneous variations of the ratio of feed gases(H2/N2 Flow ratio), feed gas flow rate (H2/N2, total-flow rate) and partial pressures of TiCl4 (PTiCl41) as well as deposition time and cobalt content of the substrate on the deposition rate of the TiN Coated Cemented Tungsten Carbide Tools were investigated. Deposition was carried out in the temperature range of 930$^{\circ}C$-1080$^{\circ}C$ and an activation energy of 46.5 Kcal/mole can be calculated. Transverse rupture strength was noticeably reduced by the TiN coating on the virgin surfa-ce of Cemented Tungsten Carbide, the extent of which was decreased according to the coa-ting thickness. Microhardness value observed on the work was in the range of 1700∼2000kg/mm, which were in well agreement with the value of bult TiN. The wear resistance of TiN layers was performed by turning test and it was observed that crater and flank resistance remarkably enhanced by TiN coating.

• 한국생산제조학회지
• /
• 제8권3호
• /
• pp.42-51
• /
• 1999

An experimental modeling of cutting and structural dynamics and the on-line detection of malfunction process is substantial not only for the investigation of the static and dynamic characteristics of cutting process but also for the analytic realization of diagnostic systems. In this regard, We have discussed on the comparative assessment of two recursive time series modeling algorithms that can represent the machining process and detect the abnormal machining behaviors in precision round shape machining such as turning, drilling and boring in mold and die making. In this study, simulation and experimental work were performed to show the malfunctioned behaviors. For this purpose, two new recursive approach (REIVM, RLSM) were adopted fur the on-line system identification and monitoring of a machining process, we can apply these new algorithm in real process for the detection of abnormal machining behaviors such as chipping, chatter, wear and round shape lobe waviness.

• 한국기계가공학회지
• /
• 제10권3호
• /
• pp.87-93
• /
• 2011

CNC lathe machining has been widely used for parts machining of vehicles, aircraft, ships, electronics, etc. because cost savings for shortening processing time and increasing productivity are great. In this study, the purpose is to investigate the effect of cooling methods such as oil mist, water-soluble cutting oils on the workpiece surface roughness with the cutting speed, cutting depth, tool nose radius and feed rate of CNC lathe machine as a parameter in the cutting process of the aluminum alloy 2024 which is used a lot recently on aircraft parts. It is found that oil mist is coolant and water-soluble cooled by cutting the experimental conditions, cutting speed and cutting depth without effecting the surface roughness value was constant.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2004년도 추계 종합학술대회 논문집
• /
• pp.78-83
• /
• 2004

일상생활의 거의 모든 커뮤니케이션 분야에 걸쳐 다양하게 활용되고 있는 인터넷이 중요한 미디어로 확실히 자리 잡혀 감에 따라 인터넷을 통한 거의 모든 정보가 무료였던 시대에서 비즈니스의 수익 구조가 구성되어 가고 있는 가운데 캐릭터의 OSMU 중 인터넷상에서의 활용 범위가 점차 확장되고 있는데, 캐릭터가 활용되어 수익을 창출할 수 있는 모델에 관하여 연구한다.