• Macromolecular Research
• /
• 제9권3호
• /
• pp.171-178
• /
• 2001

We report the diffraction behavior of the functionalized sol-gel film composed of two different silanes. One silane (SGDR1) contains disperse red 1 (DR1) that is composed of an azobenzene unit. The other silane (SGCHC) bears a chalcone derivative that is photocrosslinkable under UV irradiation. Two-beam coupling method was employed for fabricating the diffraction gratings. The dynamics of formation and erasure of the gratings was studied in term of the variation of the diffraction efficiency. The decaying behavior of the polarization efficiency was also observed after turning off the two pump beams. For complete erasure of the diffraction gratings, we irradiated the linearly polarized single beam. During two-beam coupling, we irradiated UV light on the film surface. The effects of the photocrosslink between the double bonds in chalcone units on the value and dynamic properties of diffraction efficiency are mainly studied in this work.

• 반도체디스플레이기술학회지
• /
• 제16권1호
• /
• pp.102-105
• /
• 2017

Currently, the size of the electronic device is in the nano area. In order to control the movements of these nanoscale devices, one should be able to understand the physical phenomena in the nano area. Recently, due to carbon nanotubes and mechanical outstanding electrical conductivity and mechanical characteristics of the carbon nanotubes and Graphene behaves to apply. Efforts have been active. There are various tubes with a radius of a in a compact mass in the form of a Multi walled carbon nanotubes in different between the radius. Van der Waals force can move smoothly without friction with each other by the nanoscale motor turning, using the properties, making. This is the lightest solids per unit area on the thickness is electrical atomic layer one of the substance and the electrical conductivity, the best material and mechanical characteristics are very much. Many studies because great is the ideal nanoelectromechanical device of material is being considered. In this study, electrical resonator for a new structure proposed and the nature and methodology would like to come up.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.850-855
• /
• 2006

Railway signal interlocking device with the reverse unit control device which is most important from country season, the subway and the high-speed railroad back, electric relay boarding and lodging accomplishes the master and servant and it comes and before from the Japanese back and an electronic interlocking device, a zone one interest in updated technology introduction Great Britain, Germany, Sweden and the United States, it quarrels about under developing it puts to practical use even from our country it shows. About reasoning lower our country subway or the country closing up shop stem there is not a possibility of throwing away the impression where the exhibition hall of foreign nation signal system is being turning out. Consequently is enormous a system well expense at the foreign corporation about under paying Oh!, it understands, with difficult always it is exposed to it is an actuality in the accident which is dangerous. In like this point of view first piece which is important securing safety of system from electronic anger of electronic interlocking device.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제31권2호
• /
• pp.201-216
• /
• 2024

The aim of this paper is to study a new and unified class 𝓡^α_Cosh of analytic functions associated with cosine hyperbolic function in the open unit disc E = {z ∈ ℂ : |z| < 1}. Some interesting properties of this class such as initial coefficient bounds, Fekete-Szegö inequality, second Hankel determinant, Zalcman inequality and third Hankel determinant have been established. Furthermore, these results have also been studied for two-fold and three-fold symmetric functions.

• Architectural research
• /
• 제25권4호
• /
• pp.61-72
• /
• 2023

The main factors that made Seoul's rapid population accommodation and urbanization possible in the mid-to-late 20th century were the ex-pansion of urban infrastructure, completion of the transportation system, and housing supply. The development of transportation and resi-dential development occurred simultaneously, and in particular, apartment complexes, a representative residential area in Seoul, were most influenced by Perry's neighborhood unit theory. The purpose of this study is to analyze the process of the physical environment of apartment complexes in the metropolitan area in response to development of transportation in the mid-to-late 20th century. The analysis sites are Jamsil Apartment Complex(1974), Dunchon Apartment Complex(1979), Mok-dong New Town(1983), Sanggye New Town(1985), Bundang New-town(1990) and Ilsan Newtown(1990), which were planned at the turning point of development of transportation and actively reflect the neigh-borhood unit theory. The analysis was conducted in three stages. Analyzing the status of transportation when the plan was established, deriv-ing the planning elements, and classifying the planning elements into walking, bus, car, and subway which is the representative transportation. The conclusions from the analysis are as follows. Firstly, completing the legal system and expanding the related infrastructure are essential. Secondly, in contrast to the increase in traffic volume, the pedestrian environment has been continuously improved. Thirdly, despite the emergence of new mode of transportation, there was a tendency to activate the linkage between transportation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권5호
• /
• pp.763-772
• /
• 2018

Objective: Swine manure in Korea is separated into solid and liquid phases which are composted separately and then applied on land. The nutrient accumulation in soil has been a big issue in Korea but the basic investigation about nutrient input on arable land has not been achieved in detail. Within the nutrient production from livestock at the national level, most values are calculated by multiplication of the number of animals with the excreta unit per animal. However, the actual amount of nutrients from swine manure may be totally different with the nutrients applied to soil since livestock breeding systems are not the same with each country. Methods: This study investigated 15 farms producing solid compost and 14 farms producing liquid compost. Composting for solid phase used the Turning+Aeration (TA) or Turning (T) only methods, while liquid phase aeration composting was achieved by continuous (CA), intermittent (IA), or no aeration (NA). Three scenarios were constructed for investigating solid compost: i) farm investigation, ii) reference study, and iii) theoretical P changes (${\Delta}P=0$), whereas an experiment for water evaporation was conducted for analyzing liquid compost. Results: In farm investigation, weight loss rates of 62% and 63% were obtained for TA and T, respectively, while evaporation rates for liquid compost were 8.75, 7.27, and $5.14L/m^2{\cdot}d$ for CA, IA, and NA, respectively. Farm investigation provided with the combined nutrient load (solid+liquid) of VS, N, and P of 117.6, 7.2, and $2.7kg/head{\cdot}yr$. Nutrient load calculated from farm investigation is about two times higher than the calculated with reference documents. Conclusion: The nutrient loading coefficients from one swine (solid+liquid) were (volatile solids, 0.79; nitrogen, 0.53; phosphorus, 0.71) with nutrient loss of 21%, 47%, and 29%, respectively. The nutrient count from livestock manure using the excretion unit has probably been overestimated without consideration of the nutrient loss.

• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3594-3599
• /
• 2009

경부고속선에서 사용하는 열차제어시스템은 ATC, IXL, CTC로 분류되며, 열차 속도 제어 및 간격 제어에 관련된 ATC 정보는 UM71 AF 궤도회로와 BSP Loop를 통해 지상에서 차상으로 전송된다. 궤도회로를 통해 전송되는 정보는 주로 열차 운행에 직접적인 영향을 주는 운영 정보로 구성된다. 특히 BSP Loop를 통해 전송되는 정보는 터널, 차축온도 검지장치, 또는 절연구간과 같이 특수한 선로변 환경에 대해 추가적인 정보 전송을 필요로 하는 구간에서 사용된다. 본 논문에서는 경부고속선 개통 이후부터 현재까지 기존선과 고속선 연결 구간에서 주로 사용되는 UM71 AF 궤도회로의 BA형 동조 유니트 특성을 기준값과 측정값을 비교하여 분석하였다. 이러한 분석을 통해 BA형 동조 유니트가 설치된 구간의 궤도회로 장애와 같은 문제 발생시 원인규명 및 유지보수를 보다 쉽게 이룰 수 있을 것이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.818-821
• /
• 2004

With a rapid development in the area of micro and ultra precision technology, the micro surface machining of small size parts are explosively increased. Especially, to improve efficiency of various beams in lens and reflector, non-rotational symmetric form and several mm level heights changeable surface can be machined at a time. These geometric complex 3D surface cannot be machined by general short stroke FTS. The long stroke FTS if firmly needed to move directly several mm and have nm level positioning accuracy for the complex surface form. The long stroke FTS used linear motors to drive moving unit long and fine, aero static bearings to decrease friction and moving errors in guide way, optical linear scale with nm level resolution to measure position of FTS. Furthermore, to increase the performance of acceleration of FTS, the light material, such as AL is used for the structure and the high stiffness box type structure is selected. In this paper, the genetic algorithm approach is described to determine a set of design parameters for auto tuning. The authors have attempted to model the design problem with the objective of minimizing the error, such as variable pattern change. This method can give the better alternative than existing other method.

• 수산경영론집
• /
• 제39권3호
• /
• pp.111-137
• /
• 2008

Fisheries resources living in inland have continuously reduced due to over-fishing and development thoughtless for the environment. Inland fisheries that target the fisheries resources have been also confronted by several problems such as insufficiency of inland fisheries management systems, inconsistent fisheries management system, inferior infrastructure of inland fisheries, and decreasing fishermen's real income. These problems have demotivated fishermen who want to focus on fishing and farming activation. Therefore, this paper provides alternatives of reorganization for turning to sound and healthy inland fisheries industries by reviewing Korean inland fisheries management systems. The reorganization should be preferentially granted resource management by water system considering geographical conditions, seed release, and establishment of fisheries order for maintenance of sound and healthy inland fisheries. Also, the reorganization should be moved toward the competitive strengthening of "company unit" for inland fisheries, the nourishment of fisher-oriented fisheries management system, strong relationship among inland fishermen, the systematic management of inland fisheries, the strengthening of guidance service for inland fisheries, the extension of infrastructure related to fisheries production, the development of inland fisheries policy including public people, and the improvement of inland fisheries system and law reflecting various users of inland fisheries.

• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.638-645
• /
• 2014

컨테이너 물동량 증대에 따라 항만 내 타부두 간 환적 물동량 수요가 크게 증대되었으나, 기존 YT 방식의 타부두 환적은 이를 효율적으로 뒷받침하지 못하고 있다. 본 논문은 컨테이너항만의 경쟁력 향상을 위한 컨테이너 대용량 이송장치 개발방안을 제시하였다. 시스템 대안의 장단점 분석과 국내 터미널 운영형태를 고려하여 2단적재 다중 편성시스템(DMTS)을 최종 대안으로 선정하였다. DMTS 회전반경은 13.5m로, 국내 기존 항만의 layout에서 즉시 운용 가능할 것으로 판단된다. 특허분석을 통하여 DMTS 핵심기술 항목으로서 현가 조향장치 최적설계, 동력 및 동력전달 장치, 주행제어 및 안전감시장치, 그리고 트레일러 간 연결기 등을 도출하였다. DMTS는 국내 수출입 항만에 적용하는데 문제가 없으며 단위 수송용량이 높아 운영 효율성 개선에 기여할 것으로 판단된다.