• 제목/요약/키워드: Turning moment

검색결과 51건 처리시간 0.022초

巾着網漁船의 船型과 操船의 基礎的 硏究 (A Fundamental Study on the Types of Ship and the Steerage of Purse Seiners)

  • 김진건
    • 수산해양기술연구
    • /
    • 제30권1호
    • /
    • pp.13-24
    • /
    • 1994
  • Purse seiner detects a fish school navigating in full speed with the aid of fish finder, sonar, helicopter, etc., and casts a net quickly to enclose the fish school in purse seine net according to the movement of the fish school, wind, and current. At this moment, if the time of casting a net, direction, speed, and turning circle are net suitable, it is unavoidable to lose fish school founded with hard efforts and we only consume our efforts of casting and hauling the net. Therefore, in order to enclose the fish school to enhance the amount of fish for each casting, the author investigated the type of ships equipped with purse seiners and examined maneuvering tests so that we provide some basic information to figure out the ability of steerage correctly. The results obtained are summarized as follows: 1. Block coefficients of pelagic tuna purse seiners with gross tonnage between 500 and 1500 tons are recorded between 0.50 and 0.55 which are greater than those of off shore purse seiners recorded as between 0.44 and 0.54 and less than those of various cargo ships recorded as between 0.56 and 0.84. 2. L/B, L/D, B/D, B/T, and T/D of the class of gross tonnage between 75 and 130 tons are respectively 4.49, 11.00, 2.45, 2.85 and 0.86 as their average and those of the class of between 500 and 1500 tons are 4.89, 10.53, 2.15, 2.73 and 0.75 respectively, which are quite different from those of various cargo ships recorded as 6.0~7.5, 11.0~12.0, 1.6~2.0, 2.2~2.8 and 0.65~0.75 respectively. 3. Rudder area ratio of purse seiners of the class of between 75 and 130 tons is 1/24~1/31 and that of the clase of between 500 and 1500 tons is 1/36~1/42 which is greater than that of various cargo ships recorded as 1.45~1.75. 4. On speed-length ratio of purse seiners. 111 Dong-a has the biggest value 2.94 the class of 130 tons has 2.52 the class of between 75 and 100 tons has 2.30~2.35 and the class of between 500 and 1500 tons has 1.99~2.05. 5. Turning circle of stern trawlers Pusan 404 and Haelim 3 are measured as below according to rudder angles 5$^{\circ}$, 15$^{\circ}$, 25$^{\circ}$ and 35$^{\circ}$ respectively. Advances are 11.3~13.6, 6.0~7.1, 3.6~4.8 and 2.5~3.5 times of LPP respectively. Tactial diameters are 15.2~18.6, 6.9~8.0, 4.2~4.9 and 2.9~3.5 times of LPP. Purse seiner 111 Dong-a with rudder angle 35$^{\circ}$ has a good yaw with quick responsibility since its advance is 2.2~2.3 times of LPP and since its tactial diameter is 2.0~2.1 times of LPP. 6. In full ahead going of purse seiner 111 Dong-a, it takes about 2 minutes and 10.6 times of LPP from the reverse turning its engine into full astern to the ship speed 0. In its full astern going, it takes about 1 minute and 5.1 times of LPP from the reverse turning its engine into full ahead to the ship speed 0. In its full ahead going, it takes about 2 minutes and 50 seconds and 12.3 times of LPP from stopping its engine to the dead slow ahead speed 3.2 knots.

  • PDF

명량수도 해역에서 항해속력 규제와 선박운용에 관한 연구 (A Study on the Ship's Speed Control and Ship Handling at Myeongnayang Waterway)

  • 김득봉;정재용;박영수
    • 해양환경안전학회지
    • /
    • 제20권2호
    • /
    • pp.193-201
    • /
    • 2014
  • 본 연구는 강조류 해역을 통과하는 선박의 해양사고를 방지하기 위해 안전한 항행속력과 적절한 통과시기를 제시하였다. 이 자료의 해석을 위하여 2010년 7월 12일부터 15일까지 명량수도를 대상으로 통과선박의 AIS 데이터 수집과 2010년 9월 4일 현장조사를 실시하였고, 여기서 수집된 자료를 바탕으로 최소항행속력(minimum navigation speed)과 여유 제어력을 감안한 적정항행속력(optimum navigation speed), 조류속력별 대응타각(respond rudder angle)을 산출하였다. 또한 조위와 조류속력 데이터를 분석해 안전한 통과시기를 제시하였다. 이 연구를 통해 얻은 결과는 다음과 같다. (1) 조류의 유속이 4.4 kn 이상이 되면 선박의 타만으론 자력 조선이 불가능하다. (2) 강한 조류에 의해 발생되는 유압력과 회두모멘트에 대응하기 위해서는 최소항행속력은 조류의 2.3배, 적정항행속력은 조류의 4.0배 이상이어야 한다. (3)사리 기간 중 명량수도 적정 통과 시기는 고 저조시간 1시간 전부터 최소 30분 전까지이며 고 저조가 된 이후 5시간 동안은 4 kn 이상의 유속이 남아있는 시간으로 이 지역 항해를 자제해야 한다.

렘 콜하스의 건축에서 나타나는 밀집과 보이드를 적용한 디자인 방법에 관한 연구 (A Study on the Design Methods Utilizing 'Congestion' and 'Void' from Rem Koolhaas's Architecture)

  • 박소라
    • 한국실내디자인학회논문집
    • /
    • 제23권6호
    • /
    • pp.51-59
    • /
    • 2014
  • Rem Koolhaas has pursued new architectural approaches breaking with conventional ones. Around the 1990s when large-scale projects occurred with the union of Europe ahead, Koolhaas recognized the limits to the existing methods for responding to such changes. Accordingly, he came to use design methods based on 'congestion' and 'void' as strategical alternatives, which became the moment for him to leap forward from the previous working sphere based in Europe to becoming an architect who would be commissioned a number of large-scale global projects. Therefore, this study intends to investigate his design methods which utilized congestion and void, and to derive spatial characteristics from the projects based on such methods. First of all, the study looked into the historical background, definition and process of congestion and the void as design methods, and analyzed his projects to which such methods were applied by classifying them into the following categories: 1) the void that removes a space of singularity; 2) the void that penetrates space while making a flow; and 3) the void that is formed by vertical extrusion. Then, the characteristics of architectural spaces made in this way were identified as 1)the single-body appearance made by congestion and the following types of space made by the void: 2) the non-uniformly shaped space that looks like floating; 3) the flexible space with various flows and directions; and 4) the space with virtual possibilities that embrace contingent events. This understanding of Rem Koolhaas's design methods which were attempted in various ways at his critical turning point will be the foundation to understand the overall world of his works.

Kinematic Analysis of Back Somersault Pike According to Skill Level in Platform Diving

  • Park, Jiho;Yoon, Sukhoon
    • 한국운동역학회지
    • /
    • 제27권3호
    • /
    • pp.157-164
    • /
    • 2017
  • Objective: The purpose of this study was to investigate kinematic differences in back pike somersault in platform diving according to skill level and to apply the findings to improve performance. Method: Korean divers participating in this study were divided into a skilled group (age: $21.6{\pm}4.16y$, height: $1.68{\pm}0.03m$, weight: $62.0{\pm}3.94kg$, career: $12.6{\pm}5.13y$) and a less-skilled group (age: $20.6{\pm}2.7y$, height: $1.72{\pm}0.05m$, weight: $64.8{\pm}6.76kg$, career: $12.2{\pm}2.49y$) and an independent t-test was performed to analyze differences between groups at the moment of takeoff. Results: The two groups showed significant differences in displacement and velocity of center of mass (COM), takeoff angle, hip joint angle, knee joint angular velocity, and hip joint angular velocity at the takeoff (p<.05), and significant differences in displacement of COM, hip joint, and ankle joint during flight (p<.05). Conclusion: For a successful back pike, the COM should rise quickly in the vertical direction and the hip joint angle and angular velocity should increase. To improve performance, the back pike turn should be practiced on the ground before an attempt on a 10-m platform, to stretch the ankle and knee joints and enable quick flexion of the hip joint when turning in flight.

Morphogenetic Alterations of Alternaria alternata Exposed to Dicarboximide Fungicide, Iprodione

  • Kim, Eunji;Lee, Hye Min;Kim, Young Ho
    • The Plant Pathology Journal
    • /
    • 제33권1호
    • /
    • pp.95-100
    • /
    • 2017
  • Fungicide-resistant Alternaria alternata impede the practical control of the Alternaria diseases in crop fields. This study aimed to investigate cytological fungicide resistance mechanisms of A. alternata against dicarboximide fungicide iprodione. A. alternata isolated from cactus brown spot was cultured on potato-dextrose agar (PDA) with or without iprodione, and the fungal cultures with different growth characteristics from no, initial and full growth were observed by light and electron microscopy. Mycelia began to grow from one day after incubation (DAI) and continued to be in full growth (control-growth, Con-G) on PDA without fungicide, while on PDA with iprodione, no fungal growth (iprodione-no growth, Ipr-N) occurred for the first 3 DAI, but once the initial growth (iprodione-initial growth, Ipr-I) began at 4-5 DAI, the colonies grew and expanded continuously to be in full growth (iprodione-growth, Ipr-G), suggesting Ipr-I may be a turning moment of the morphogenetic changes resisting fungicidal toxicity. Con-G formed multicellular conidia with cell walls and septa and intact dense cytoplasm. In Ipr-N, fungal sporulation was inhibited by forming mostly undeveloped unicellular conidia with degraded and necrotic cytoplasm. However, in Ipr-I, conspicuous cellular changes occurred during sporulation by forming multicellular conidia with double layered (thickened) cell walls and accumulation of proliferated lipid bodies in the conidial cytoplasm, which may inhibit the penetration of the fungicide into conidial cells, reducing fungicide-associated toxicity, and may be utilized as energy and nutritional sources, respectively, for the further fungal growth to form mature colonies as in Ipr-G that formed multicellular conidia with cell walls and intact cytoplasm with lipid bodies as in Con-G.

4차 산업혁명 시대의 공연예술아카이브와 창조적 활용 (A Study of the Creative Application of Performing Arts Archives in the Fourth Industrial Revolution)

  • 최해리
    • 트랜스-
    • /
    • 제6권
    • /
    • pp.1-15
    • /
    • 2019
  • 공연은 현시되는 순간에 즉시 소멸하며, 오직 공연자의 몸과 관객의 기억 속에서만 남는 무형의 예술이다. 사라진 공연의 동일한 반복, 복원, 재현은 불가능하지만, 동서고금을 막론하고 예술가들은 자신들의 공연을 유형의 형태로 남기고자 당대 첨단의 기술을 동원하여 다양한 기록술(記錄術)을 시도해왔다. 이러한 기록술로 공연예술을 보존 및 활용하는 곳이 공연예술아카이브이다. 4차 산업혁명 시대를 맞이하여 선진국들의 라이브러리 기관들은 예술가들뿐만 아니라 일반인들의 창조적 행위를 후원하는 기관으로 변모하고 있다. 한국의 공연예술아카이브 기관들 또한 4차 산업혁명 시대에 발맞추어 공연자료를 보존하고 서비스한다는 고루한 사료보관소의 역할에서 벗어나서 새로운 문화콘텐츠를 창제하는 플랫폼으로 변환해 가야 할 것이다. 이 논문은 한국 공연예술아카이브의 변화양상을 요약하고, 4차 산업혁명 시대에 대응하는 공연예술 아카이브의 창조성에 대해 제시하고자 한다.

  • PDF

유아의 동작 교육을 위한 실루엣 기반 동작 추정 (Silhouette-based Motion Estimation for Movement Education of Young Children)

  • 신영숙;김혜정;이정욱;이경미
    • 한국콘텐츠학회논문지
    • /
    • 제8권4호
    • /
    • pp.273-284
    • /
    • 2008
  • 동작은 유아의 신체적, 사회적, 인지적 발달에 매우 중요한 요소이다. 본 논문에서는 유아의 신체에 적절한 동작 추정 방법을 제안한다. 본 논문에서는 동작교육에 필요한 동작 중에서 걷기, 뛰기, 앙감질의 이동동작과 구부리기, 뻗기, 균형잡기, 회전하기의 비이동 동작을 대상으로 한다. 제안된 시스템은 두 대의 카메라에서 획득된 프레임에서 조명 보정, 배경 제거, 모폴로지 실행 등의 과정을 통해 실루엣을 추출한다. 실루엣 특징으로 면적, 가로세로 비율, 발의 위치, 7개의 Hu moments를 사용한다. 또한 지역 특징으로 실루엣을 $5{\times}3$으로 나누어 각 영역의 면적과 움직임을 사용한다. 동작 추정을 위해서, 추출된 특징에 확률 전파를 적용하였다. 본 논문에서 제안된 알고리즘은 마커없이 유아들의 기본 동작을 추정함으로써 동작교육을 위한 가상 학습공간에서 실감형 인터페이스로 사용될 수 있는 가능성을 보여주고 있다.

암반매입말뚝을 위한 주면고정액의 역학적 특성 (Mechanical Properties of Filling Materials for Bored Pile in Rock)

  • 문경태;박상렬;신민건
    • 대한토목학회논문집
    • /
    • 제37권4호
    • /
    • pp.637-645
    • /
    • 2017
  • 제주도는 여러 차례의 화산활동에 의해 형성된 섬으로 불규칙한 화산암층 구조를 가지고 있다. 해상풍력발전기와 같은 구조물은 기초에서부터 하중 작용점까지의 거리가 멀고 상대적으로 큰 수평하중이 작용하여 매우 큰 전도모멘트를 지지해야 한다. 이러한 구조물을 경제적으로 지지하기 위해서는 암반층이라도 말뚝기초를 시공해야 한다. 따라서 본 연구에서는 암반매입말뚝을 위한 주면고정액의 적정배합비를 찾기 위하여 물, 시멘트, 모래의 배합비를 달리하여 역학적 성능을 평가하고, 실험 결과와 기존 연구 결과를 비교분석하였다. 동일한 배합조건에서 시멘트풀과 소일시멘트보다 모르타르(잔골재 비=20~40%)의 역학적 성능이 우수하게 나타났다. 이 결과를 바탕으로 적정배합범위와 강도추정식을 제안하였다.

운전정지 조건에서 5 MW 수평축 풍력터빈 로터의 풍하중 해석 (Wind Loads of 5 MW Horizontal-Axis Wind Turbine Rotor in Parked Condition)

  • 유기완;서윤호
    • 한국풍공학회지
    • /
    • 제22권4호
    • /
    • pp.163-169
    • /
    • 2018
  • 본 연구에서는 운전 정지 상태로 회전하지 않는 수평축 해상 풍력터빈 로터에서 발생하는 풍하중을 풍속, 요 각도, 방위각, 피치 각도를 달리하면서 대기경계층 내에서 작동하는 조건으로 평가하였다. 하중 예측 결과의 검증을 위해 단순화 한 블레이드 형상에 대한 블레이드 요소이론과 단순 계산치를 이용하여 얻어낸 공력 하중을 상호 비교하였으며, 코드와 비틀림 각도가 블레이드 스팬 방향에 따라 변하는 NREL 5 MW급 대형풍력터빈 로터에 대해서는 NREL에서 개발한 FAST 해석 결과와 본 연구의 해석 결과를 비교함으로써 해석 결과의 정확도를 검증하였다. 로터의 하중은 허브 중심을 원점으로 하는 고정된 3축 좌표계에 대해서 힘과 모멘트로 표현되는 6분력 하중으로 나타내었다. 따라서 이 결과는 풍력터빈 시스템의 동적 거동 해석과 로터에서 발생되는 전도 모멘트를 견디기 위해 필요한 지지 구조물의 기초하중 자료로 적용할 수 있다.

3차원 공간 탐색을 위한 헬리콥터 조종사 메타포어와 그 구현 (Helicopter Pilot Metaphor for 3D Space Navigation and its implementation using a Joystick)

  • 김영경;정문렬;백두원;김동현
    • 한국컴퓨터그래픽스학회논문지
    • /
    • 제3권1호
    • /
    • pp.57-67
    • /
    • 1997
  • 가상공간 탐색은 근본적으로 가상카메라의 조작으로 귀결된다. 이때 가상카메라는 자유도 6을 가지고 움직인다. 그러나 우리가 주로 사용하는 마우스나 조이스틱 등의 입력장치는 2D 장치이다. 따라서 입력장치의 운동에 대응되는 카메라의 운동은 어느 한 순간에는 2D운동이다. 그러므로 카메라의 6DOF(degrees of freedom) 운동은 2D 또는 1D 운동들의 결합으로 표현할 수밖에 없다. 많은 가상공간 탐색 브라우저에서는 이 문제를 해결하기 위해 여러 가지 탐색 모드를 사용한다. 그러나 다수의 모드를 설정하는데 사용된 기준이 분명하지 않고 각 모드에서 가능한 조작들이 서로 중복되는 경향이 있을 뿐만 아니라 입력장치의 감각 대응성(kinesthetic correspondence)이 미흡하기 때문에 사용자가 공간을 탐색할 때 상황을 장악하고 있다는 느낌을 가지기 힘들다. 이 문제를 해결하기 위해서는 일관적이면서도 포괄적인 단일 탐색 메타포어가 필요한데 본 논문에서는 이를 위해 헬리콥터 조종사 메타포어를 제안한다. 헬리콥터 조종사 메타포어를 이용한다는 것은 조종장치들에 의해 사용자가 공간에서 날고있는 가상 헬리콥터의 조종사가 되어 공간 영상을 탐색 한다는 의미이다. 본 논문에서는 헬리콥터의 6DOF 운동을 직관적으로 조작하기 위해서 이를 6개의 2D 운동공간, 즉, (1) 평면상의 이동, (2) 수직면상의 이동, (3) 현위치중심의 피치, 요회전, (4) 현위치중심의 롤, 피치회전, (5) 좌우상하 선회, (6) 물체중심회전, 으로 분할하고, 각 2D 운동공간을 가시화 시켜 그 공간 자체를 메뉴화 하였다. 이렇게하면 사용자로 하여금 의식적으로 특정 모드를 선택하는 부담없이 단지 필요에 의해 적절한 2D 운동공간을 시각적으로 판단할 수 있도록 해준다. 각 운동공간에서의 헬리콥터 운동은 조이스틱의 2D 조작으로 제어한다.

  • PDF