• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.135-138
• /
• 1996

A wide angle propagation techinque is formulated through an expansion of the Holmholtz operator followed by a Pade expansion and factorization of the resulting polynomials. Its accuracy is checked through the successful modeling of integrated waveguide turning mirrors, indicating that 6-th order polynomial can handle as large as 55$^{\circ}$tilt angle very accurately.

• 한국운동역학회지
• /
• 제14권1호
• /
• pp.117-131
• /
• 2004

The foreign superior players and national team players' turning phase was measured, compared and analyzed to help the representative players improve the skill of turn. The underwater video camera used to analyze and evaluate the representative players' skill of turn in detail and the result is as follows. 1. The record for the phase of turn was similar to the rank of the last record. The improvement of the skill of turn was required because Korean players' record was lower than the foreign players' one. In case of 200m events the 1st turn was the fastest and it took more time as the turn is repeated. 2. It shows that the preparation phase and turing motion cause the difference between the players and within one player. 3. The horizontal movement of center of gravity moves to turning point slowly in the preparation phase, does not move nearly in the turning phase and increase again in the propulsion phase. Good record has short time for turn phase. The result means that the shorten the turning phase is the most important factor. Therefore the preparation for this is required. The vertical movement is maintained or increase a little and then move to from the turning phase. 4. The characteristic of horizontal velocity in center of gravity is that there is any big changes at the preparation phase, the faster velocity is found from the better record and the accelerating time is fast at the propulsion phasen. The wrong motion is made by not using the swimming velocity for fuming and waiting and more time is required by this. 5. The angle of knee when the player touch the turning point is 106.22-135.56 and the maximum angle of knee during the driving after the touch of tuning point is full extension. The size of maximum angle of knee did not match with the required time of propulsion phase. It seems that the individual difference is big when the players touch the turning point the angle of knee and the research for the individual angle which can reveal the maximum power should be carried out. The national team player's skill for the him is behind the foreign players' one and a lot of problems were found. It shows that the players could not practice the skill for turn during the training. The 1st reason for it is the various facilities like underwater window or analyzing equipment like underwater camera with which the coaches can teach and correct the players' detailed skill. It is need to evaluate the players' detailed skill exactly and correct it by objective data to complete the good skill in the future. In this regard, the investment for the facility is necessary.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.195-199
• /
• 2001

The flow turning process, an incremental forming process, is a cost-effective forming method for axi-symmetric intricate parts to net shape. However, the flow turning process shows a fairly complicated deformation, it is very difficult to obtain satisfactory results. Therefore extensive experimental and analytical research has not been carried out. In this study, an fundamental experiment was conducted to improve productivity with process parameters such as tool path, angle of roller holder($\alpha$), feed rate(v ) and comer radius of forming roller(Rr). These factors were selected as variables in the experiment because they were most likely expected to have an effect on spring back. The clearance was controlled in order to achieve the precision product which is comparable to deep drawing one. And also thickness and diameter distributions of a multistage cup obtained by flow turning process were observed and compared with those of a commercial product produced by conventional deep drawing.

• Journal of Biosystems Engineering
• /
• 제23권3호
• /
• pp.291-304
• /
• 1998

A control algorithm fir the unmanned vehicles was developed using image information received through a CCD camera that acquires more powerful information over the wide range of wave-length comparing with other sensors and was applied to a speed-sprayer. The algorithm consisted of straight mode for passing along with middle of two tree-rows and turning mode for changing from a row to another row. In case of turning mode, two marks of colored papers were employed to indicate turning point and to decide turning direction for various orchard situations. The method of analysis and image would be differed according to camera's tilt-angle and position that is set on the speed-sprayer. Hence, it analyzed the point of difference by making camera's up and downward tilt-angle.

• 한국정밀공학회지
• /
• 제25권3호
• /
• pp.50-55
• /
• 2008

In this paper, we propose a new shape compensation scheme to make up for the difference in groove radius between the formed tools and the machined bearing raceways, which inherently takes place during machining the ball bearing raceways by the turning process using conventional formed tools. The associated conventional methods of the formed tool design and its modification such as a simple depth compensation method and a graphical compensation method are introduced and the latter, which has been known to be the better of the two, is experimentally investigated in detail to reveal its drawback. The algorithm is given and it is applied to develop a formed tool design program. The program developed by the presented approach is successfully applied to design the formed turning tool for the bearing raceways.

• 수산해양기술연구
• /
• 제41권2호
• /
• pp.156-164
• /
• 2005

The size of the ship's turning circle is influenced by various factors, such as block coefficient, underwater side shape, rudder area ratio, draft, trim and Froude's number. Most of them are already fixed on departure from a port. However, the ship's speed and the rudder angle are controllable factors which operations are able to change optionally during sailing. The DGPS measured the turning circles according to the ship's speed and the rudder angle. The maximum advances by slow and full ahead were 302m and 311m, and the maximum transfers were 460m and 452m, respectively. There occurs almost no difference in size of the turning circle by variation of the ship's speeds. When the rudder angles were changed to $10^{\circ}$, $20^{\circ}$ and $30^{\circ}$, the maximum advances were 447m, 271m and 202m, and then also the maximum transfers 657m, 426m and 285m, respectively. The diameter of the tuning circle was decreased exponentially when the rudder angle was increased. The maneuverability was better when the direction of turning and propulsion of propeller are in the opposite direction rather than in the same one togetherm. The distance of the maximum transfer was always bigger than that of the maximum advance.

• 대한기계학회논문집B
• /
• 제26권8호
• /
• pp.1077-1087
• /
• 2002

The heat (mass) transfer characteristics on the blade surface of a high-turning first-stage turbine rotor for power generation has been investigated by employing the naphthalene sublimation technique. A four-axis profile measurement system is developed successfully for the measurements of local sublimation depth on the curved surface In the leading edge region, there is a good agreement between the present heat (mass) transfer data and the previous result on a turbine blade with a moderate turning angle, but some discrepancies are found in the mid-chord heat (mass) transfer between the two results. The local heat (mass) transfer on the present suction surface is greatly enhanced due to an earlier boundary transition, compared with that on a turbine blade with a moderate turning angle, meanwhile there is only a slight change in the pressure-side heat (mass) transfer between the two different turbine rotors. In general, the heat (mass) transfer augmentation by the endwall vortices is found much higher on the suction surface than on the pressure surface.

• 한국기계가공학회지
• /
• 제12권1호
• /
• pp.63-69
• /
• 2013

Many researchers are trying to reduce the use of lubrication fluids in metal cutting to obtain safety, environmental and economical benefits. The aim of this study is to determine the optimization lubrication conditions in minimum quantity lubrication(MQL) turning of workpieces with taper angle. This study has been considered about various conditions of MQL. The objective functions are cutting force and surface roughness. Design factors are nozzle diameter, nozzle angle, MQL supply pressure, distance between tool and nozzle and length of supply line. The cutting force and surface roughness were statistically analyzed by the use of the Box-Behnken method. As a results, optimum lubrication conditions were suggested and verification experiment has been performed. The results of this study are expected to help the selection of lubrication conditions in MQL turning.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.422-427
• /
• 2000

The design of low-solidity vaned diffusers and the effect on the performance of a turbocharger compressor is discussed. The effect of vane number and turning angle was investigated while maintaining a basic design with a leading edge angle of $70^{\circ}$, leading and trailing edge radius ratios of 1.1 and 1.3. All results are compared with those obtained with the standard vaneless diffuser configuration and it was shown that all designs increased and shifted the pressure ratio to reduced flowrates. Despite the low-solidity configuration none of the vane designs provided a broad operating range, and the vane leading edge angle was not main factor that system went into the surge condition. The diffuser of higher trailing edge angle improved the flow range for the compressor to operate at lower flow region.

• 한국항해항만학회지
• /
• 제27권5호
• /
• pp.465-471
• /
• 2003

내항 탱커가 비교적 정온한 해역에서 타선을 피하기 위해 대각도 조타론 행한 결과, 선회 중에 전복하는 사고가 발생하였다. 저자들은 전 논문에서 비중량이 큰 액체화물의 자유표면영향에 의한 중심상승과 전진 항해 중에 발생하는 선체 침하와 이로 인하여 생기는 선체 트림의 변화 때문에 발생하는 복원력 감소를 고려하여 사고선박의 복원력 곡선을 계산하였다. 본 논문에서는 먼저 전복사고를 당한 선박의 모형선을 제작하여 자항 선회실험을 실시하고 전복선박의 정상 선회시의 선회반경, 편류각 및 선속을 계측한다. 그리고 자항 선회실험을 통하여 얻은 선회반경, 선속 및 횡 편류각을 기초로 하여 각 경사각에 따른 측 압력과 경사 모멘트에 관한 실험을 실시하고, 갑판상 해수 침입이 측 압력과 경사 모멘트에 미치는 영향에 대해서 파악한다. 마지막으로 선회시 해수 침입으로 인해 발생하는 외측 경사 모멘트와 측압 중심의 변화론 조사함으로써 전복사고가 발생한 저건현 내항 탱커의 복원성에 대하여 검토를 하였다.