• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.356-362
• /
• 2004

Using multi wrapped copper by polyimide film for HTS transformer, the breakdown and V-t characteristics of two type models for turn-to-turn, one is point contact model, the other is surface contact model, were investigated under ac and impulse voltage at 77 K. A material that is Polyimide film (Kapton) 0.025 mm thickness is used for multi wrapping of the electrode. Statistical analysis of the results using Weibull distribution to examine the wrapping number effects on V-t characteristics under at voltage as well as breakdown voltage under ac and impulse voltage in $LN_2$ was carried. Also, survival analysis was performed according to the Kaplan-Meier method. The breakdown voltages for surface contact model are lower than that of the point contact model, because the contact area of surface contact model is wider than that of point contact model. At the same time, the shape parameter of the point contact model is a little bit larger than the of the surface contact model. The time to breakdown tn is decreased as the applied voltage is increased, and the lifetime indices slightly are increased as the number of layers is increased. According to the increasing applied voltage and decreasing wrapping number, the survival probability is increased.

• 한국강구조학회 논문집
• /
• 제18권6호
• /
• pp.759-768
• /
• 2006

턴버클은 인장재의 중간에 삽입되어 인장력을 조절할 수 있는 장치이다. 그러나 설계 인장력의 크기는 측정이 불가능하고 경험적인 방법으로 현장기술자가 판단하여 시공을 한다. 기존의 턴버클을 이용한 구조물은 시간이 지나면서 인장력의 변화가 생기지만 적절한 조치 없이 그대로 사용하게 된다. 이러한 단점을 보완하기 위해 인장력 측정이 가능한 턴버클을 개발하였다. 본 연구는 기존의 턴버클의 직선부를 곡선화하여 인장력에 의한 곡선부의 휨변형을 이용하여 가로방향 변화를 유도하였다. 가로방향의 변화는 그 값이 작으므로 버니어 캘리퍼스나 내측 마이크로메터를 이용하여 현장에서 측정하고 이 값을 이용하여 하중의 크기를 측정할 수 있도록 고안하였다. 시작품을 제작하여 실험을 수행하였다. 또한 이론적인 해석을 통하여 해석의 유용성을 입증한 후 변수해석을 하였다. 변수해석에 의해 적절한 용량과 측정기의 형상을 도출하였다.

• 한국보건간호학회지
• /
• 제10권1호
• /
• pp.118-138
• /
• 1996

Because of accelerated urbanization public body visiting nursing project that started according as matter of health on urban class in the lower brackets of income was concentrated on Social interests has a unsatisfied points to propel project efficiently from the lack of rating materials. Therefore centering around written contents in documentary literature of citizen health by household in five years from starting year of project to now. visiting frequency by medical manpower was evaluated quantitatively and qualitatively in aspect of management hereupon. for the sake of giving a basic materials for public health project of this field. This research presents documentary literature of citizen health which become materials is that as one person's charged region of nurse in duty scale. district is Kang-Buck Gu. the object is resident in the lower brackets of income grounded livelihood protection law and who is admitted by the head of organ~chief of health care). and the number of material centering around the head of a household is 415 copy. The result of research is summarized. as follow. 1. Average visiting frequency examinated by medical manpower show difference according to valuables of supervision characteristics namely average visiting. Frequency of nurse has long term residence in case registration season is early and supervision season is the first year and is high incase a kind of house is unlicdnsed mountain town. Average visiting frequency with doctor is high incase supervision season is the first year and the medical insurance system is admitted by chief of health care. That shows that a man of discomfort behavior left alone are yet many in local society. The meaning of this result shows that the continuity of official relation about class in the lowest brackets of income of long term residence goes well between househole who is a user of visiting nursing service of the object according to midway income under management influences a given duty of nurse s and so causes quantitative decrease. 2. In case behavier and condition of health that nurse diagnoses are bad. as the type matter is a lack of health and the number of patient is large. the average visiting frequency of nurse is high. because average visiting frequency with doctor is high as the condition of health is bad and the number of patient is large. That is similar with that of nurse. CD Average visiting frequency of nurse s seen by matter of disease is very high only in apoplexy by 39.50 and is confined within limits from 7.63 to 11.36 in other disease. But average visiting frequency with doctor is double as many as that of nurse but defined in apoplexy hypertension and articulate. (1) Average visiting frequency of nurse by existence in inoculation of hepatitis is low by 6.73 in unidentified group and very high by 26.89 in group of non-inoculation and the case of the antigenic positive man of B type hepatitis or epileptic who can't be inoculated shows 13.00 and that even family nursing service is needed to them. That result shows that though one person nurse of local charge has a large scale of duty. as visting nursing service is given a class who has a large demand preferentially by respectively accurate nursing diagnosis. the number of diagnosis service is similar with it. 3. During five years. average visiting frequency of nurse is 10.84 and average visiting frequency with doctor is 76.50 seeing from the official scale of nurse. visiting by household is performed two more per year to the average. Seeing this by type of service. average visiting frequency of nurse is higher in indirectly nursing than in directly nursing and that suggests that at the time of visiting household nurse performs education of protection lively save patient but at the time of contrastedly visiting with doctor. directly nursing is more contents of service show no difference by man power and medication dressing by demand is 14.3 and 18.6 the aid of hardship term of doctor and nurse is high by 18.7 and 17.00 in the request of hospitalization when seeing by demands. 4. Action by turns exemplified 1994 is well in sequence of 2/4 turn. 3/4 turn. 1/4 turn. 4/4 turn. When seen by average visiting frequency of nurse but gradually is even. Without difference by turns. average visiting frequency of doctor is much higher in 1/4 turn than other turns. Type of service by turns is all even but directly nursing is inactive in 4/4 and indirectly nursing. Very increases in 4/4 and so. Nurse's quantity of duty is plentiful that shows that by evaluation of last turn and plan of project. Contents of service follows that medication and dressing is the highest by' 5.57 in 1/4turn. goes down gradually by turn. becomes 3.57 in 3/4 turn. and increases again by 4.83 in 4/4 turn. the rest service is higher in 2/4 turn than other turns. 5. Total visiting frequency of nurse is explained to total $37.5\%$ by six valuables of visiting frequency of doctor. nursing demand. demand of diagnosis. condition of behavior. year. Special terms and magnitude of influential power is the same as sequence of enumerated valuables. Namely. the higher the visiting frequency of doctor. the bigger nursing and demand of diagnosis is. the worse the condition of behavior is. the older the object is and the more the household of special terms is. the high total visiting frequency of nurse is.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권3호
• /
• pp.231-238
• /
• 2002

In this paper, we present a new approach to autopilot design for skid-to-turn missiles which may have severe aerodynamic cross-couplings and nonlinearities with angle of attack. The model of missile motion is derived in the maneuver plane and, based on that model, pitch, yaw, and roll autopilot are designed. They are composed of a nonlinear term which compensates for the aerodynamic couplings and nonlinearities and a linear controller driven by the measured outputs of missile accelerations and angular rates. Besides the outputs, further information such as Mach number, dynamic pressure, total angle of attack, and bank angle is required. With the proposed autopilot and simple estimators of bank angle and total angle of attack, it is shown by computer simulations that the induced moments and some aerodynamic nonlinearities are properly compensated and that the performance is superior to that of the conventional ones.

• 한국전기전자재료학회논문지
• /
• 제19권10호
• /
• pp.912-917
• /
• 2006

In this paper, Trench emitter electrode IGBT structure is proposed and studied numerically using the device simulator, MEDICI. The breakdown voltage, on-state voltage drop, latch up current density and turn-off time of the proposed structure are compared with those of the conventional trench gate IGBT(TIGBT) structures. Enhancement of the breakdown voltage by 19 % is obtained in the proposed structure due to dispersion of electric field at the edge of the bottom trench gate by trench emitter electrode. In addition, the on-state voltage drop and the latch up current density are improved by 25 %, 16 % respectively. However increase of turn-off time in proposed structures are negligible.

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권3호
• /
• pp.38-42
• /
• 2003

HTS transformer is promising one of HTS power applications to be commercialized in the near future. To realize the applications, insulation technology in the coolant, liquid nitrogen, should be established. So breakdown characteristics should be considered at insulation components; turn-to-turn, layer-to-layer, winding-to-winding, were investigated. Firstly breakdown strengths of Kapton films were compared with Kraft paper these are as turn insulator. And next the characteristics of surface flashover on FRP were measured and the influence on breakdown strength of bubble generated with joule heat was discussed with the shape of cooling channel between layers. Finally barrier effect at winding-to-winding was discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.139-142
• /
• 2006

This paper describes a new method using random modulated strategies for switched reluctance machines. The proposed method is combined random turn-on, turn-off angle technique and random pulse width modulation technique. The purpose of this proposed method is to decrease harmonic spectrum, and thus reduce the emitted acoustical noise. A random generator is generated by linear congruential generator (LCG) using random pulse position (RPP) scheme. Simulation results show that the harmonic intensity of proposed method is better than that of conventional method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.71-73
• /
• 2007

This paper deals with dynamic characteristics of LSRM. Position choose mover of LSRM and inductance. When approved current in each phase by decided position, we made sure current and voltage according to turn-on, turn-off. In dynamic simulation of LSRM, through an experiment, we decided turn-on position of inductance profile. Also, we presented dynamic characteristic analysis model which is consisted at motor and sensor signal part, etc., and substitute circuit constant that get using magnetic equivalent circuit method, we confirmed current and voltage waveform.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.417-420
• /
• 1998

In this paper the formation mechanism of tail current is analyzed and its effect on GTO turn-off performance is given. The conclusion is that the large tail current will considerably increase the turn-off loss $E_{off}$ and cause the re-triggering during GTO's off-switching, therefore the best design criterion is that the tail current of power GTO must be as low as possible.w as possible.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.663-666
• /
• 1999

This paper describes a three-phase converter with high power factor using a scheme of discontinuous current mode(DCM). The proposed system can replace the conventional diode bridge with step-up chopper which is used as a converter for adjustable speed drive. In this system, the current of reactor is zero at turn-on instance because of operation in DCM, while the switch turns off at the instance of maximum current. A soft-switching scheme with lossless snubber was proposed. Therefore, a zero-voltage switching at turn off can be achived by lossless snubber and zero-current switching at turn on can be obtained by operating under DCM. A theoretical analysis and computer simulations with PSpice were done to verify the operation of the proposed system. Also a prototype of hardware system was built and tested for verifying the feasibility of proposed system.