• Title/Summary/Keyword: Turn-Table

Search Result 73, Processing Time 0.033 seconds

후판 압연공정에서의 판 선단부 형상제어 연구 (Ski-end shape control based on the model in heavy plate mill)

  • 천명식;박해두
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2007년도 추계학술대회 논문집
    • /
    • pp.93-95
    • /
    • 2007
  • Studies on ski-end shape control at the top end of rolling plate in heavy thick plate mill by using FEM analysis and measuring system have been performed. Plate shape behaviour at the top-end on rolling by the two different methods in finishing rolling process has been observed. One is to minimize the height of ski-end by using pass line based on the relational model between shape factor and pick-up and the other one is to prevent turn down problem caused by the impact between table roller and down bended plate on rolling by using roll speed difference. To minimize the height of ski-end, the prediction models based on the FEM analysis and measuring data was developed. The control method of ski - end shape on finishing rolling process was applied in actual mill and the height of ski-end was reduced by about 50% compared with conventional operation.

  • PDF

지리적으로 분산된 디자이너들을 위한 3D 디자인 협업 환경 - 공유 조작과 원격 실재감을 지원하는 증강현실 기반 인터랙션 기법을 중심으로 - (Collaborative 3D Design Workspace for Geographically Distributed Designers - With the Emphasis on Augmented Reality Based Interaction Techniques Supporting Shared Manipulation and Telepresence -)

  • 사공경;남태진
    • 디자인학연구
    • /
    • 제19권4호
    • /
    • pp.71-80
    • /
    • 2006
  • 국제화, 전문화, 분업화 되고 있는 비즈니스 환경으로 인해 제품 디자인 프로세스에서 협업의 중요성은 날로 높아지고 있다. 본 연구에서는 서로 다른 공간에 존재하는 디자인 전문가들이 3D 모델을 함께 검토하고 논의할 수 있는 실시간 원격디자인 협업 환경을 제안한다. 특히 원격 협업 환경에서 원격 실재감, 공유조작, 상대 인식 등의 비언어적인 의사소통 방법을 제공하는 새로운 인터랙션 기법을 개발하고, 디자인 리뷰와 관련된 작업에 어떠한 영향을 끼치는지 평가하였다. 관련연구 조사와 디자인 협업 행태의 관찰 실험을 기반으로 작업대상 관련, 작업공간 관련, 상대인식 관련 요구사항을 도출하였다. 이를 충족시키기 위해 증강현실(Augmented Reality) 기반의 3차원 원격 협업 환경을 구축하였고 원격 사용자에 대한 존재감을 제공하는 회전원반(Turn-table)과 가상그림자(Virtual Shadow)라는 인터랙션 도구를 개발하였다. 회전원반은 가상모델의 조작에 직관성을 부여하고 상대의 조작에 물리적인 단서를 제공한다. 가상그림자는 상대의 위치, 제스처, 지시 등의 인식 정보를 지속적이고 자연스럽게 제공한다. 평가 실험을 통하여 새로운 인터랙션 도구들이 3D 모델의 검토에 있어서 대략적인 지시를 효과적으로 지원하며 수정사항에 대한 논의를 촉진시킴을 알 수 있었다. 연구 결과는 가상의 3차원 모델을 다루는 원격에 위치한 사용자들(디자이너-디자이너, 디자이너-엔지니어, 혹은 디자이너-모델러 등) 간의 자연스러운 의사소통을 촉진하고 협업의 효율을 증대시키는데 기여할 수 있다.

  • PDF

정밀 연삭가공을 위한 제어시스템 설계 (Control System Design for Precision Grinding)

  • 오창진
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
    • /
    • pp.453-458
    • /
    • 2000
  • Design of an in-process feedback control system has been studied for precision grinding. A grinding system consists of a grinding tool, a turn table and a disk-shaped workpiece on the table is taken as an object. A grinding process model has been deduced which gives some reasoning about the process errors. In the control system the tool position is actively controlled by an electro-magnetic actuator in-process. The ground error is feedback to compose a closed-loop control system and an optimal PID controller is applied. Some control performances such as transient response and disturbance such as transient response and disturbance attenuation have been examined, which convinces the effectiveness of the control. Some methods for implementation of the control. Some methods for implementation of the control have been suggested from a standpoint of practical application.

  • PDF

Shaking table testing of a steel frame structure equipped with semi-active MR dampers: comparison of control algorithms

  • Caterino, N.;Spizzuoco, M.;Occhiuzzi, A.
    • Smart Structures and Systems
    • /
    • 제15권4호
    • /
    • pp.963-995
    • /
    • 2015
  • The effectiveness of the various control algorithms for semi-active structural control systems proposed in the literature is highly questionable when dealing with earthquake actions, which never reach a steady state. From this perspective, the paper summarizes the results of an experimental activity aimed to compare the effectiveness of four different semi-active control algorithms on a structural mock up representative of a class of structural systems particularly prone to seismic actions. The controlled structure is a near full scale 2-story steel frame, equipped with two semi-active bracing systems including two magnetorheological dampers designed and manufactured in Europe. A set of earthquake records has been applied at the base of the structure, by utilizing a shaking table facility. Experimental results are compared in terms of displacements, absolute accelerations and energy dissipation capability. A further analysis on the percentage incidence of undesired and/or unpredictable operations corresponding to each algorithm gives an insight on some factors affecting the reliability and, in turn, the real effectiveness of semi-active structural control systems.

PLC를 이용한 자동 연마석 평면 연삭기 개발 (Development of automatic surface grinder using PLC)

  • 주해호;이재원;박현제
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
    • /
    • pp.71-74
    • /
    • 1992
  • This paper describes the automation of the surface grinder for a grinding wheel by application of programmable logic controller(PLC) with a position sensor, and a limit switch. The control system is designed to provide feeding a workpiece on the turn table and pressing it by the upper disk automatically. In this development the automation of checking the thickness of a grinding wheel is most important. In order to measure the relative displacement, the proximity sensors were employed and the sensitivities of the sensors were investicated and discussed the superiority. It has been shown by model experiment that the automation system of the surface grinder is performed satisfactory.

  • PDF

지상 연소 시험을 위한 킥 모터의 추력 축 정렬 (The Thrust Axis Alignment of Kick Motor for Ground Firing Test)

  • 정동호;김지훈;이한주;오승협
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.389-392
    • /
    • 2008
  • The thrust axis alignment of the launch vehicle is very important because of the misalignment causes the unstable attitude control and results in mission failure. Generally, optical methods such as digital theodolite and laser tracker and mechanical method such as turn table method are used to thrust axis alignment. This article deals with the simple method of thrust axis alignment of Kick Motor.

  • PDF

광디스크 플레이어의 턴테이블용 폴리머재료의 마찰ㆍ마멸 특성 연구

  • 지광열;김대은
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 춘계학술대회 논문요약집
    • /
    • pp.60-60
    • /
    • 2004
  • 광디스크 미디어 저장기기에 있어서 음악과 영상을 재생하는 광디스크 플레이어의 기구부품 중 턴테이블은 디스크를 장착, 고정하여 디스크에 기록된 신호를 재생케 하는 광디스크 메커니즘의 중요기능 부품이다. 특히 별도의 클램퍼 없이 턴테이블에 부설된 탄지력만으로 디스크를 장착, 고정하는 슬림형 플레이어에서 스핀들 모터의 회전 시 턴테이블에 장학된 광디스크의 슬립은 재생에러를 야기한다. 스피닝 회전속도가 증가할수록 디스크의 슬립을 방지하기 위해서는 디스크와 턴테이블의 증가된 마찰력이 요구된다.(중략)

  • PDF

A Rapid Quantitative Assay of Intact Ambroxol Tablets by FT-NIR Spectroscopy

  • Kim, Do-Hyung;Ah, Woo-Young;Kim, Hyo-Jin
    • 대한약학회:학술대회논문집
    • /
    • 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
    • /
    • pp.213.2-213.2
    • /
    • 2003
  • A simple analytical procedure using FT-NIR for the rapid determination of individual ingredients was evaluated. Direct measurements were made by reflection using a reflectance accessory, by transmittance using tablet accessory and turn table. FT-NIR spectral data were transformed to the first derivative. Partial Least Square Regression(PLSR) was applied to quantify near-infrared (NIR) spectra of 2 ingredients. These calibration models were cross-validated (leave-one-out approach). The prediction ability of the models was evaluated on ambroxol tablets and compared with the real values in manufacturing procedure. (omitted)

  • PDF

비보호 좌회전 효율성 제고를 위한 대향 직진 교통류의 Gap-Time기준 연구 (Study on The Warranty of Opposing Through Flow Gap Acceptance Time for more Efficient Management of Permissive Left-Turn)

  • 백승엽;박기수
    • 한국ITS학회 논문지
    • /
    • 제10권4호
    • /
    • pp.107-115
    • /
    • 2011
  • 경찰청에서는 교통운영체계 선진화 방안의 일환으로 "비보호 좌회전" 운영 확대를 추진하고 있으며, 현재 기존 연구자료 및 편람 상 비보호좌회전 허용준거로는 교통사고건수, 차로수, 보행자교통량, 시계확보, 비보호 좌회전 차로수, 교통량(비보호 좌회전 교통량 ${\times}$ 대향직진 교통량) 등 6가지 세부기준이 제시되어있다. 그러나 실무적인 입장에서 비보호 좌회전 차량의 안전하고 원활한 통행을 확보하기 위해 무엇보다 대향 직진 교통류의 차량 사이에 일정 수준 이상의 시간적 간격(Gap-time)이 확보되어야 한다. 이에 본 연구에서는 교통류간(차량간) 행태를 고려한 미시적 측면인 간격수락 개념이 준거기준으로 반영되어야 한다는 전제를 두고 비보호 좌회전으로 운영중인 서울시내 6개 교차로를 대상으로 현황조사 및 동영상 촬영을 통해 비보호 좌회전 차량군의 교차로 통과시간값(T1)과 대향직진 차량군 사이의 Gap-time값(T2)과의 관계를 조사 분석하여 두 값 사이의 관계를 통계적 과정을 통해 유추하였다. 또한 표본수 부족의 한계를 극복하기 위해 미시적 분석 프로그램인 Vissim 을 이용한 모형분석을 통해 두 값 사이의 관계를 추가 분석하였다. 이에 교통운영체계 선진화 연구보고서에서 제시한 준거(안)과 더불어 비보호 좌회전 운영을 위한 새로운 기준으로 T1 값에 따른 적정 T2값 모형제시(T1값 - T2값 Table)를 통해 효율적인 비보호 좌회전 운영 확대에 도움을 줄 수 있을 것으로 기대해본다.

고려시대 가구재료 연구 (A Study on the Material of Furniture in Goryeo)

  • 조숙경
    • 한국가구학회지
    • /
    • 제25권1호
    • /
    • pp.19-27
    • /
    • 2014
  • This paper studied the materials of the furniture which the noble men used in Goryeo, based on the furniture material category of solid wood furniture, lacquerware inlaid with mother-of-pearl and hardware. As for the solid wood furniture, the wood and furniture types are inferred based on the documents. The trees used for the wood furniture were zelkova, korean willow, pine, royal paulownia, maidenhair tree, korean pine, chinese juniper and elm. The furniture types were table, chair, wooden bench, small portable table, writing table, and folding screen. As to the types of lacquerware inlaid with mother-of-pearl, most of them were hams with top, which were made of abalone shells. The features of the lacquerware inlaid with mother-of-pearl were in detail and elaborate like the pattern of the full bloomed chrysanthemum. Writing tables were also made of lacquerware as pieces of furniture. Distinctively, the mother-of-pearl furniture material was popular enough to be used even in a horse saddle. Regarding the metal feldspar used as both a practical use and decoration, there are drop handle, hinge, the front basis, and lock seen in the artifacts, which were made of cast iron, bronze, and brass. Their manufacture techniques were eojamoon, bratticing and sheet metal. Through this study of the furniture materials used in Goryeo, it seems that Goryeo furniture focused on the functions rather than on the decorations, and in turn the forms were simple and basic. The technique of mother-of-pearl, a bit elaborate one, was used in the props furniture like kitchen wares, hams, or writing talbes. Probably, the solid wood is inferred to be used in a low wooden bench, a chair, and a table based on the documents.

  • PDF