• Journal of Advanced Research in Ocean Engineering
• /
• 제2권2호
• /
• pp.86-98
• /
• 2016

In this study, after the installation of a subsea pipeline, backfilling was performed in the trenched area. During these operations, a stability problem in the subsea pipeline occurred. The pipeline was directly impacted by environmental loading such as waves and currents that were caused by backfill material when scouring or sediment transport and siltation was carried out. Therefore, this study reviewed whether trenching was necessary, and conducted research into an indigenous seabed property that contains granular soil. A study of cohesive soil was also conducted in order to cross-correlate after calculating the values of the critical Shields parameter relevant to elements of the external environment such as waves and current, and the shear Shields parameter that depends on the actual shearing stress. In case of 1), sedimentation or erosion does not occur. In the case of 2), partial sedimentation or erosion occurs. If the case is 3), full sedimentation or erosion occurs. Therefore, in the cases of 1) or 2), problems in structural subsea pipeline stability will not occur even if partial sedimentation or erosion occurs. This should be reflected particularly in cases with granular and cohesive soil when a reduction in shear strength occurs by cyclic currents and waves. In addition, since backfilling material does not affect the original seabed shear strength, a set-up factor should be considered to use a reduced of the shear strength in the original seabed.

• 한국항공우주학회지
• /
• 제35권9호
• /
• pp.799-804
• /
• 2007

액체추진제 추력기 연소실의 인젝터로부터 발생하는 분무 거동을 파악하기 위하여 광학계측 기법을 사용한다. 실험에 사용된 인젝터는 지름이 0.406 mm이며 중심축으로부터 30 의 경사각을 이루는 8 개의 노즐 구멍으로 구성된다. 분무생성의 초기조건과 분무발달에 따른 미립화 과정을 분석하기 위해, 이중모드 위상도플러속도계(DPDA)로 측정된 액적의 속도 및 입경 등의 변이 거동을 제시하고 Nd:Yag 레이저평면광에 의해 획득된 순간평면이미지와 함께 고찰한다. 분무액적의 초기 분사속도에 근거한 Re 수와 We 수 등의 무차원 변수를 도출하여 인젝터 발생 분무의 미립화 및 난류성질 등에 대한 분무유동 양식의 범주를 결정한다. 이러한 분무분열에 대한 정성적, 정량적 결과는 향후 새로운 추력기 개발에 확실한 설계 기반을 제공할 것이다.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.73-84
• /
• 2015

Electricity generation using fossil fuels has caused environmental pollution. To solve this problem, research on new renewable energy sources (solar, wind power, geothermal heat, etc.) to replace fossil fuels is ongoing. These devices are able to generate power consistently. However, they have many weaknesses, such as high installation costs and limits to possible setup environments. Therefore, an active study on piezoelectric harvesting technology that is able to surmount the limitations of existing energy technologies is underway. Piezoelectric harvesting technology uses the piezoelectric effect, which occurs in crystals that generate voltage when stress is applied. Therefore, it has advantages, such as a wider installation base and lower technological costs. In this study, a piezoelectric harvesting device imitating seaweed, which has a consistent motion caused by fluid, is used. Thus, it can regenerate electricity at sea or on a bridge pillar, which has a constant turbulent flow. The components of the device include circuitry, springs, an electric generator, and balancing and buoyancy elements. Additionally, multiphysics analysis coupled with fluid, structure, and piezoelectric elements is conducted using COMSOL Multiphysics to evaluate performance. Through this program, displacement and electric power were analyzed, and the actual performance was confirmed by the experiment.

• 한국화재소방학회논문지
• /
• 제26권2호
• /
• pp.90-96
• /
• 2012

외장재에 의한 수직화재확산은 확산속도가 구획화재에 비해 매우 빨라 이에 대한 화재의 특성 분석이 요구된다. 본 연구에서는 건물 외부에서 발생한 화재가 연소 확대되면서 수직으로 상승하여 개구부를 통해 유입되는 화재의 성상에 대해서 외장재로 널리 사용되는 심재가 폴리에틸렌인 일반 알루미늄복합패널에 대해 화재시뮬레이션을 적용하여 연구하였다. 그 결과, 수직확산화염은 화재초기에 2층까지 상승하는 데는 약 135초가 걸렸지만 10층까지는 470초, 최고층인 30층까지 상승하는 데는 711초에 도달하는 것으로 분석되어 고층부로 갈수록 난류 및 외장재 설치공간의 연돌효과에 의해서 급격히 확대되는 것을 알 수 있었다. 이러한 연구 결과로 외장재가 설치된 건축물의 화재 시 개구부를 통한 화재는 동시다발적으로 그 건물의 내부에 확대되는 심각성을 확인할 수 있었다.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.72-79
• /
• 2000

In recent, occupational diseases in harmful working places become a social issue. It is the well-known fact that a respiration in polluted working places exert a serious effect on health of workers. Accordingly, the cutting off contaminants air originally is the best way to improve working environments. In these cases, ventilation systems should be essentially installed to dilute or exhaust the contaminated indoor air. In this study, we investigated the characteristics of ventilation system of the noxious gas in working indoor places with natural ventilation by using COMET. The numerical simulations were carried out the natural ventilation with two phase(air, dust). For turbulent flow, Reynolds stresses were closed by the standard $\kappa$-$\varepsilon$ model. The results are as follows ; 1) In the natural exhaust in the working place, the flows of the central region have a more rapid velocity vector than the right and left one. 2) Numerical results show that the distribution of contaminants concentration have greater influence on convection than the case of diffusion by government of velocity vectors. 3) To observe the velocity variation with distance, three location of distance are considered. As results, it shows that the velocity are 0.075(m/s) at y=5(m), 10(m) and mean concentration are raised 10.6% at y=5(m), 10(m). 4) We have presented the useful data for the adequate counterplan in the harmful working places by carrying out the various investigation of the natural ventilation.

• 대한토목학회논문집
• /
• 제31권5B호
• /
• pp.483-489
• /
• 2011

본 연구에서는 잠제 주변의 세굴 및 퇴적현상을 수치적으로 모의하기 위해 기존의 수치 파동 모델에 모래입자의 거동 해석을 위한 lagrangian 입자 모델을 결합한 새로운 수치모델을 개발하였다. 수치 파동 모델로서는 파랑에 의한 해저지반 내의 모래입자의 이동과 유동화 해석을 위해 투수성 매체 내부의 유체저항(관성저항, 층류저항 및 난류저항)을 고려할 수 있는 수치모델에 LES 난류모델을 도입한 수치해석기법(허와 최, 2008)을 이용하였다. 또한, 모래입자의 이동해석을 위한 lagrangian 입자 모델로서는 많은 개개의 입자들의 동적해석에 탁월한 개별요소법(Cundall and Strack, 1979)을 적용하였다. 개발된 해석기법을 이용하여 불투과 잠제 전면의 세굴에 대한 수치시뮬레이션을 실시한 후, 기존의 수리모형실험과 정성적으로 비교하면서 그 적용성을 검토하였다.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2284-2293
• /
• 2004

The evaporation heat transfer coefficient h$\_$r/ and frictional pressure drop Δp$\_$f/ of refrigerant R-134a flowing in the oblong shell and plate heat exchanger were investigated experimentally in this study. Four vertical counterflow channels were formed in the oblong shell and plate heat exchanger by four plates of geometry with a corrugated sinusoid shape of a 45 chevron angle. Upflow of refrigerant R-134a boils in two channels receiving heat from downflow of hot water in other channels. The effects of the refrigerant mass flux, average heat flux, refrigerant saturation temperature and vapor quality of R-134a were explored in detail. Similar to the case of a plate heat exchanger, even at a very low Reynolds number, the flow in the oblong shell and plate heat exchanger remains turbulent. The results indicate that the evaporation heat transfer coefficient h$\_$r/ and pressure drop Δp$\_$f/ increase with the vapor quality. A rise in the refrigerant mass flux causes an increase in the h$\_$r/ and Δp$\_$f/. But the effect of the average heat flux does not show significant effect on the h$\_$r/ and Δp$\_$f/. Finally, at a higher saturation temperature, both the h$\_$r/ and Δp$\_$f/ are found to be lower. The empirical correlations are also provided for the measured heat transfer coefficient and pressure drop in terms of the Nusselt number and friction factor.

• 대한기계학회논문집B
• /
• 제35권9호
• /
• pp.903-913
• /
• 2011

본 연구에서는 가스터빈 블레이드의 냉각을 위해 사용되는 막냉각 홀을 대상으로 다양한 형상변수들이 막냉각 효율에 미치는 영향을 평가하기 위한 수치적 연구를 수행하였다. 삼차원 압축성 Reynolds-averaged Navier-Stokes 해석을 수행하였으며, 난류모델로는 shear stress transport 모델이 사용되었다. 해석을 통해 홀의 형상, 측면 방향 분사각, 홀의 주기 및 분사율이 막냉각 효율에 미치는 영향이 평가되었다. 해석결과, 원통형홀의 경우 측면 방향 분사각이 존재할 때 월등히 향상된 막냉각 효율을 보여주었으며, 홴형상 홀의 경우 측면 방향 분사각이 $20^{\circ}{\sim}30^{\circ}$일 때 가장 높은 막냉각 효율을 보여주었다. 또한 홀의 주기의 변화에 따른 성능평가 결과 높은 분사율일 때가 낮은 분사율의 경우보다 홀의 주기에 의존하는 경향을 보였다.

• 한국주조공학회지
• /
• 제12권3호
• /
• pp.220-229
• /
• 1992

The degree of purification and the macrostructure of high purity aluminium were studied through the alternate stirring method in order to improve the nonuniformity of solute concentration in the unidirectional stirring method. The $2^3$ factorial design was done to examine the effects of experimental factors more qualitatively. In the relatively low stirring speed of 1500 rpm with alternate stirring mode, the uniform solute profile and refined grain structure were obtained due to strong washing effect and turbulent fluid flow. It was induced by the transition of the momentum boundary layer by alternation of the stirrer. It was concluded from this study that the alternate stirring mode was more effective to obtain the uniformity of solute even in the stirring speed of 1500 rpm. But the degree of purification decreased below the critical alternating period. When 2N(99.8wt.%) aluminium was used as the starting material the morphology of solid-liquid showed the cellular shape and the columnar grains were inclined to the direction of rotation. This inclined grain growth resulted from the difference of relative velocities of solid and liquid. The inclined angle was increased as the stirring speed increased and solidification proceeded. In the case of 4N aluminium, there was no inclined grain growth and it was confirmed from the macrostructure and SEM work that the morphology of solid-liquid interface was planar. From the factorial design, it was found that the alternate stirring mode showed poorer purification effect than that of unidirectional stirring mode at low speed(500 rpm). In addition, the factor that had the most significant effect on the degree of purification was the stirring speed.

• 대한기계학회논문집B
• /
• 제28권12호
• /
• pp.1535-1548
• /
• 2004

Condensation heat transfer experiments were conducted with the oblong shell and plate heat exchanger without oil in a refrigerant loop using R-l34a, R-407C and R-410A. An experimental refrigerant loop has been developed to measure the condensation heat transfer coefficient h$_{r}$ and frictional pressure drop $\Delta$p$_{f}$ of the various refrigerants in a vertical oblong shell and plate heat exchanger. The effects of the refrigerant mass flux(40∼80kg/$m^2$s), average heat flux(4∼8kW/$m^2$), refrigerant saturation temperature(30∼4$0^{\circ}C$) and vapor quality of refrigerants on the measured data were explored in detail. Similar to the case of a plate heat exchanger, even at a very low Reynolds number, the flow in the oblong shell and plate heat exchanger remains turbulent. A comparison of the performance of the various refrigerants revealed that R-410A had the highest heat transfer performance followed by R-l34a, and R-407C had the lowest performance of the refrigerants tested. The pressure drops were also reported in this paper. The pressure drops for R-410A were approximately 45% lower than those of R-l34a. R-407C had 30% lower pressure drops than R-l34a. Experimental results were compared with several correlations which predicted condensation heat transfer coefficients and frictional pressure drops. Comparison with the experimental data showed that the previously proposed correlations gave unsatisfactory results. Based on the present data, empirical correlations of the condensation heat transfer coefficient and the friction factor were proposed.tor were proposed.sed.