• 대한기계학회논문집B
• /
• 제40권1호
• /
• pp.21-29
• /
• 2016

상업용 풍력발전단지에 설치된 기상 탑의 측정데이터와 풍력터빈의 SCADA(Supervisory Control and data Acquisition) 데이터를 이용하여 풍력터빈의 후류영향을 분석하고 후류 풍속저감 예측을 위한 eddy viscosity 모델 및 난류강도 예측을 위한 Lange 모델의 계산값과 비교하였다. 후류영향 분석결과, 자유단(free stream) 풍속이 낮을수록 풍력터빈 후류에서의 풍속 감소율은 증가하였으며 후류 난류강도 역시 자유단 풍속이 낮아질수록 증가하는 특징을 보였다. Eddy viscosity 모델에 의해 예측된 풍력터빈 후류중심에서의 풍속 감소율은 측정값에 비해 과대 예측되었으며 Lange 모델에 의한 후류 난류강도 예측은 실측값과 유사하게 예측되고 있음을 보였다.

• 한국해안해양공학회지
• /
• 제6권3호
• /
• pp.205-215
• /
• 1994

난류모형을 도입하여 풍성류에 대한 3차원 수치모형을 수립하고, 풍성류 계산에 있어서 연직 와점성계수 산정방법들에 대한 비교평가를 수행하였다. 검토된 방법은 함수형(0-방정식), 1-방정식, 2개의 2-방정식 난류모형($ extsc{k}$-$\varepsilon$과 $textsc{k}$-ι)이며, 난류모형은 난류확산 특성길이의 연직분포에 대한 비교를 통하여 각 방법의 특징이 검토되었다. 양단이 막힌 수로와 순환수로에서 유속의 연직분포 계산결과를 수리실험자료와 비교검증하였다. 분석결과에 의하면 1-방정식 난류모형에 적합한 난류확산 특성길이 산정식은 포물선형이었으며, 2-방정식 난류모형($textsc{k}$-ι 모형과 $textsc{k}$-$\varepsilon$모형)은 대체로 실험치와 일치하는 경향을 보였다. 바람에 의한 영향이 전수심에 미치지 않는 경우에 가정된 연직 와점성계수의 분포는 바람이 영향을 미치는 수심까지만 적용되며, 영향이 없는 수심에서는 연직확산이 거의 일어나지 않아 적정성계수의 크기가 0에 가까웠다.

• 한국전산유체공학회지
• /
• 제9권2호
• /
• pp.30-35
• /
• 2004

A numerical study of underexpanded jet and impingement on a wall mounted at various distances from the nozzle exit is presented. The 3-dimensional Wavier-Stokes equations and κ-ω turbulence equations are solved. The grids are constructed as overlapped grid systems to examine the distance effect. The DADI method is applied to obtain steady-state solutions. To avoid numerical instability such as the carbuncle phenomena that sometimes accompany approximate Riemann solver, the HLLE+ scheme is employed for the inviscid flux at the cell interfaces. A goal of this work is to apply a number of two-equation turbulence models based on the w equation to the impinging jet problem.

• Journal of Mechanical Science and Technology
• /
• 제18권10호
• /
• pp.1819-1828
• /
• 2004

The purpose of this paper is to investigate the effects of slits and swirl vanes on the turbulence augmentation in the flow fields of a gun-type gas burner using an X-type hot-wire probe. The gun-type gas burner adopted in this study is composed of eight slits and swirl vanes located on the surface of an inclined baffle plate. Experiment was carried out at a flow rate of 450 ι/min in burner model installed in the test section of subsonic wind tunnel. Swirl vanes playa role diffusing main flow more remarkably toward the radial direction than axial one, but slits show a reverse feature. Consequently, both slits and swirl vanes remarkably increase turbulence intensity in the whole range of a gun-type gas burner with a cone-type baffle plate.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.49-56
• /
• 2003

Mathematical formulation of the zone conditional two-fluid model is established to consider flame-generated turbulence in premixed turbulent combustion. The conditional statistics of major flow variables are investigated to understand the mechanism of flame generated turbulence. The flow field in burned zone shows substantially increased turbulent kinetic energy, which is highly anisotropic due to reaction kinematics across thin flamelets. The transverse component of rms velocities in burned zone become larger than axial component in the core of turbulent flame brush. The major source or sink terms of turbulent kinetic energy are the interfacial transfer by the mean reaction rate and the work terms by fluctuating pressure and velocity on a flame surface.

• 한국전산유체공학회지
• /
• 제7권1호
• /
• pp.1-9
• /
• 2002

In this paper, a modification of PISO algorithm based on standard k-ε turbulence model was proposed. The numerical technique used in this research is finite volume method, hybrid scheme for discretizing convection term, Euler implicit scheme for discretizing time term, and non-staggered grid. The basic idea of the modification of PISO algorithm is to perform an additional corrector stage for turbulence kinetic energy and dissipation rate to correct the inconsistence of flow and turbulence. In order to validate this algorithm, simulation of flow around a square cylinder (Re=3000) was performed in two-dimensional case. The results obtained from the proposed scheme show better agreement with those from the experiment than using original PISO algorithm in coherent velocity field.

• Wind and Structures
• /
• 제13권6호
• /
• pp.487-498
• /
• 2010

When designing structures to the wind action, the variation of the mean wind velocity and turbulence parameters with the height above the ground must be taken into account. This paper presents the numerical simulation results of atmospheric boundary layer (ABL) airflows, in a numerical domain with no obstacles and with a cubic building. The results of the flow characterization, obtained with the FLUENT CFD code were performed using the ${\kappa}-{\varepsilon}$ turbulence model with the MMK modification. The mean velocity and turbulence intensity profiles in the inflow boundary were defined in accordance with the Eurocode 1.4, for different conditions of aerodynamic roughness. The maintenance of the velocity and turbulence characteristics along the domain were evaluated in an empty domain for uniform incident flow and the ABL Eurocode velocity profiles. The pressure coefficients on a cubic building were calculated using these inflow conditions.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.572-577
• /
• 2008

CFD analysis has been carried out in this paper. The purpose is to reveal the understanding of flow phenomena inside the ejector on the performance of steam ejector using three well known turbulence models. In this study, the ejector design was modeled using finite area CFD techniques to resolve the flow dynamics in the ejectors. Furthermore, from this study it can be concluded that by employed vary of turbulence models there are different results in pressure distribution, in contour of Mach number and in Entrainment ratio inside the steam ejector.

• 한국군사과학기술학회지
• /
• 제13권3호
• /
• pp.372-377
• /
• 2010

The objective of this study is to predict the drag of an axisymmetric underwater vehicle with bluff afterbody using CFD. FLUENT, commercial CFD code, is used to simulate high Reynolds number turbulent flows around the vehicle. The computed drag coefficients are compared to available experimental data at various Reynolds numbers. Four widely used two-equation turbulence models are investigated to evaluate their performance of predicting the anisotropic turbulence in a recirculating flow region, which is caused by flow separation arising from the base of the vehicle. The simulations with Realizable ${\kappa}-{\varepsilon}$ and ${\kappa}-{\omega}$ SST turbulence models predict the anisotropic turbulent flows comparatively well and the drag prediction results with those models show good agreements with the experimental data.

• 대한기계학회논문집
• /
• 제16권10호
• /
• pp.1940-1954
• /
• 1992

본 연구에서는 가공기 자체의 파라메터와 성능에 관한 연구로서 출력 에너지 가 서로 다른 가공기를 사용하여 SUS 304 스테인리스 시험편을 관통, 절단하면서 출력 에너지와 최대 출력을 비교하여 보고, 시험편 관통시 주파수와 출력 에너지와의 관계, 시험편 관통시 응융 금속 제거량에 의한 절단 속도의 예측, 서로 다른 출력의 가공에 있어서 슬릿 절단 폭, 커프 폭, 드로스 길이, 절단면의 표면 거칠기 등을 비교하여 출 력차에 따른 가공 특성을 고찰하였다.