• 한국생산제조학회지
• /
• 제9권4호
• /
• pp.123-130
• /
• 2000

Studies on the turbocharger itself or various aspects generated from turbocharged engine have been made on the performance for the natural aspirated engine equipped with the turbocharger and the intercooler. In this study, the performance prediction program based on turbocharger theory is developed for simulation which may reduced the cost and the trial -and-error time. The program is verified with the experimental results for 11, 000 cc diesel engine with the turbocharger and the intercooler . Also, various factors which are invisible in experiment are predicted using this program.

• 한국자동차공학회논문집
• /
• 제18권4호
• /
• pp.74-78
• /
• 2010

Turbocharger in the application to a diesel engine was widely used in automobile industries for the improvement of engine performance. To comply with stringent emission standards, ball bearing turbocharger has been developed by applying new emission reduction technology. Up to date turbocharger has been proved as an essential part of diesel engines by demonstrating its improved engine performance, fuel efficiency and reduced emission as well. In this research, the performance of the ball bearing turbocharger was compared by the conventional journal bearing type turbocharger. The results shows that ball baring turbocharger was proved to be 10~13% higher fuel efficiency and 30% less average emission than journal bearing turbocharger.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.167-170
• /
• 2008

아음속과 초음속 영역에서 모두 비행하는 재사용 비행체의 추진기관인 TBCC(Turbine Based Combined Cycle)엔진의 성능 설계 기법에 대한 연구를 수행하였다. 이 엔진은 터보제트엔진과 램제트 엔진의 복합 사이클 엔진으로 구성되어 있으며, 비행 마하수 영역별로 터보제트엔진의 작동과 램제트 엔진의 작동 그리고 터보제트엔진과 램제트엔진이 동시 작동하는 구간으로 구성된다. TBCC엔진의 성능해석 기법을 제안하고, 개별 엔진의 성능 결과를 검증 하였으며, 가상의 비행 영역에서 TBCC엔진의 성능을 해석하였다.

• Advances in aircraft and spacecraft science
• /
• 제9권5호
• /
• pp.401-414
• /
• 2022

In the present paper, the optimal selection of batteries for an electric pump-fed hybrid rocket engine is analyzed. A two-stage Mars Ascent Vehicle, suitable for the Mars Sample Return Mission, is considered as test case. A single engine is employed in the second stage, whereas the first stage uses a cluster of two engines. The initial mass of the launcher is equal to 500 kg and the same hybrid rocket engine is considered for both stages. Ragone plot-based correlations are embedded in the optimization process in order to chose the optimal values of specific energy and specific power, which minimize the battery mass ad hoc for the optimized engine design and ascent trajectory. Results show that a payload close to 100 kg is achievable considering the current commercial battery technology.

• 한국자동차공학회논문집
• /
• 제24권2호
• /
• pp.232-241
• /
• 2016

The turbocharger, to decrease the harmful exhaust gas(CO, HC and etc.) and $CO_2$ emission as well as the increase of the engine output, would be an useful method for engine downsizing. Therefore the thermal endurance of turbine blade, the lubrication of turbine shaft and the engine knock according to the supercharge of the inlet air, had been studied. And there had been much progress in these research tasks to be achieved a breakthrough. But a study on the built-in WGV of a gasoline engine for a passenger car which may effect on the engine performance, is few. In this paper, the effect of the embedded WGV on the engine performance was performed through the endurance test, which was conducted more than 300 hrs using the 4 stroke, 1998 cc, water-cooled engine. To sum up the major results, there were an abrasion in the area of the WGV head edge and the thermal deformation on the WGV head face, These phenomena led to reducing the boost pressure which caused the reduction in the volumetric efficiency of the engine. It resulted in decreasing the engine power gradually during the life cycle of the embedded WGV.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.281-286
• /
• 2001

The radial turbine has been successfully applied to the systems which request relatively small output compared with the axial turbine, and has low manufacturing cost due to it's small size and simple structure. Recently, the researches on the development and the efficiency maximization of the radial turbine are in progress corresponding with the trend toward miniaturization in turbo machinery and the development of small dispersed power generation systems. The radial turbine is to be applied to our turbo refrigerator of which engine speed is 26,000 rpm and turbine efficiency is $88\%$. Also, as a heat exchanger is accepted instead of a combustor in our turbo refrigerator, the design of radial turbine has been performed to be appropriate to the circumstance of low temperature air, not high temperature combustor gas, into the turbine inlet . This radial turbine is being developed in consideration with not only the aero-dynamic performance but also the simplification of manufacturing and integration, and the durability at operating condition. This paper refer to the performance evaluation about the radial turbine design by comparison with consulting from Russia and the our evaluation about various design factors which are considered in aero-dynamic design process.

• 한국항공우주학회지
• /
• 제44권2호
• /
• pp.116-122
• /
• 2016

터보제트 엔진에서 램제트 엔진으로의 작동 천이를 고려한 TBCC엔진의 성능 특성을 연구하였다. 터보제트 엔진과 램제트 엔진의 성능모델을 제시하고 터보제트와 램제트의 작동 비율을 조절하여 성능 변화가 연속적으로 발생하도록 엔진 작동의 천이 모드를 고려하였다. 이를 통해 다양한 마하수와 고도에서의 완만한 엔진 성능 변화를 나타냈음을 확인하였다. 일정고도(11km)와 가상의 비행 궤적에 대하여 천이 모드를 적용하여 TBCC 엔진의 추력과 비추력의 변화를 분석하였으며, 이를 통해 예상 비행 조건과 엔진의 천이 모드를 고려한 성능 변화와 복합 사이클 엔진 작동 천이 모드의 필요성을 제안하였다.

• 한국추진공학회지
• /
• 제8권4호
• /
• pp.102-108
• /
• 2004

고성능 액체로켓엔진 개발을 위하여 터보펌프를 사용하는 재생냉각형 액체로켓엔진시스템의 배치안을 마련하였다. 엔진시스템을 구성하는 부품들에 대하여 각각의 특성을 고려하고 현실적으로 제작 및 조립이 가능하도록 3차원 디지털 모형을 제작하여 검증하였다. 1단 엔진시스템은 1축 김벌링을 하며 4개의 엔진 조립체로 클러스터링할 수 있도록 설계하였다. 2단용 엔진시스템은 2축 김벌링을 하며 1개의 엔진 조립체로 구성하였다. 1단 및 2단 엔진시스템의 조립 및 분해 공정 그리고 관련 프로그램 또한 개발하였다. 그리고 엔진시스템의 조립 및 분해 공정을 효율적으로 수행하기 위하여 여러 형태의 전용 치/공구 또한 설계하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.211-212
• /
• 2008

• 한국유체기계학회 논문집
• /
• 제3권4호
• /
• pp.38-43
• /
• 2000

Recently, KARI(Korea Aerospace Research Institute, Korea) and CIAM(Central Institute of Aviation Motors, Russia) have made an effort in developing a centrifugal compressor for a small gas turbine engine as part of a collaboration program. This compressor has been designed as a sub-component for an axial-centrifugal compression system for a small turbo-shaft engine aiming adiabatic efficiency higher than 0.81. The geometrical design requirement imposes restrictions to have high inlet hub-to-tip ratio and inlet swirl flow. In this study, the compressor has been designed using the generalized experimental data established from those compressors having pressure ratio of 3.7 to 5. From this generalized empirical correlation, desirable values of design parameters could be obtained. Subsequently, quasi-3D and 3D viscous flow analyses have been performed to ensure the adopted methodology. It is expected that the centrifugal compressor provides total pressure ratio of 4.89, corrected mass flow-rate of 1.64kg/sec, and adiabatic efficiency of 0.815 with inlet hub-to-tip ratio of 0.641. These relatively high total pressure ratio and inlet hub-to-tip ratio are the main distinctive features in this design. Besides, one of the main features of this centrifugal compressor is the adoption of a double-row bladed diffuser to effectively decelerate the transonic flow leaving the impeller. The compressor has been manufactured and will be tested in the near future.